* Patches by David Müller, 14 Nov 2003:
- board/mpl/common/common_util.c
* implement support for BZIP2 compressed images
* various cleanups (printf -> puts, ...)
- board/mpl/common/flash.c
* report correct errors to upper layers
* check the erase fail and VPP low bits in status reg
- board/mpl/vcma9/cmd_vcma9.c
- board/mpl/vcma9/flash.c
* various cleanups (printf -> puts, ...)
- common/cmd_usb.c
* fix typo in comment
- cpu/arm920t/usb_ohci.c
* support for S3C2410 is missing in #if line
- drivers/cs8900.c
* reinit some registers in case of error (cable missing, ...)
- fs/fat/fat.c
* support for USB/MMC devices is missing in #if line
- include/configs/MIP405.h
- include/configs/PIP405.h
* enable BZIP2 support
* enlarge malloc space to 1MiB because of BZIP2 support
- include/configs/VCMA9.h
* enable BZIP2 support
* enlarge malloc space to 1MiB because of BZIP2 support
* enable USB support
- lib_arm/armlinux.c
* change calling convention of ARM Linux kernel as
described on http://www.arm.linux.org.uk/developer/booting.php
* Patch by Thomas Lange, 14 Nov 2003:
Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
support all these AMD boards.
* Patch by Thomas Lange, 14 Nov 2003:
Workaround for mips au1x00 physical memory accesses (the au1x00
uses a 36 bit bus internally and cannot access physical memory
directly. Use the uncached SDRAM address instead of the physical
one.)
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 30dcdad..17871d2 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -31,6 +31,8 @@
#include <i2c.h>
#include <devices.h>
#include <pci.h>
+#include <malloc.h>
+#include <bzlib.h>
#ifdef CONFIG_PIP405
#include "../pip405/pip405.h"
@@ -41,73 +43,73 @@
#include <405gp_pci.h>
#endif
-extern int gunzip (void *, int, unsigned char *, int *);
-extern int mem_test(unsigned long start, unsigned long ramsize, int quiet);
+extern int gunzip(void *, int, uchar *, int *);
+extern int mem_test(ulong start, ulong ramsize, int quiet);
-#define I2C_BACKUP_ADDR 0x7C00 /* 0x200 bytes for backup */
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
-#define IMAGE_SIZE 0x80000
-#elif defined(CONFIG_VCMA9)
-#define IMAGE_SIZE 0x40000 /* ugly, but it works for now */
-#endif
+#define I2C_BACKUP_ADDR 0x7C00 /* 0x200 bytes for backup */
+#define IMAGE_SIZE CFG_MONITOR_LEN /* ugly, but it works for now */
extern flash_info_t flash_info[]; /* info for FLASH chips */
static image_header_t header;
-int mpl_prg(unsigned long src,unsigned long size)
+static int
+mpl_prg(uchar *src, ulong size)
{
- unsigned long start;
+ ulong start;
flash_info_t *info;
- int i,rc;
+ int i, rc;
#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
char *copystr = (char *)src;
- unsigned long *magic = (unsigned long *)src;
+ ulong *magic = (ulong *)src;
#endif
info = &flash_info[0];
#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
- if(ntohl(magic[0]) != IH_MAGIC) {
- printf("Bad Magic number\n");
+ if (ntohl(magic[0]) != IH_MAGIC) {
+ puts("Bad Magic number\n");
return -1;
}
/* some more checks before we delete the Flash... */
/* Checking the ISO_STRING prevents to program a
* wrong Firmware Image into the flash.
*/
- i=4; /* skip Magic number */
- while(1) {
- if(strncmp(©str[i],"MEV-",4)==0)
+ i = 4; /* skip Magic number */
+ while (1) {
+ if (strncmp(©str[i], "MEV-", 4) == 0)
break;
- if(i++>=0x100) {
- printf("Firmware Image for unknown Target\n");
+ if (i++ >= 0x100) {
+ puts("Firmware Image for unknown Target\n");
return -1;
}
}
/* we have the ISO STRING, check */
- if(strncmp(©str[i],CONFIG_ISO_STRING,sizeof(CONFIG_ISO_STRING)-1)!=0) {
- printf("Wrong Firmware Image: %s\n",©str[i]);
+ if (strncmp(©str[i], CONFIG_ISO_STRING, sizeof(CONFIG_ISO_STRING)-1) != 0) {
+ printf("Wrong Firmware Image: %s\n", ©str[i]);
return -1;
}
start = 0 - size;
- for(i=info->sector_count-1;i>0;i--)
- {
+ for (i = info->sector_count-1; i > 0; i--) {
info->protect[i] = 0; /* unprotect this sector */
- if(start>=info->start[i])
- break;
+ if (start >= info->start[i])
+ break;
}
/* set-up flash location */
/* now erase flash */
printf("Erasing at %lx (sector %d) (start %lx)\n",
start,i,info->start[i]);
- flash_erase (info, i, info->sector_count-1);
+ if ((rc = flash_erase (info, i, info->sector_count-1)) != 0) {
+ puts("ERROR ");
+ flash_perror(rc);
+ return (1);
+ }
+
#elif defined(CONFIG_VCMA9)
start = 0;
- for (i = 0; i <info->sector_count; i++)
- {
+ for (i = 0; i <info->sector_count; i++) {
info->protect[i] = 0; /* unprotect this sector */
if (size < info->start[i])
break;
@@ -116,73 +118,113 @@
/* now erase flash */
printf("Erasing at %lx (sector %d) (start %lx)\n",
start,0,info->start[0]);
- flash_erase (info, 0, i);
+ if ((rc = flash_erase (info, 0, i)) != 0) {
+ puts("ERROR ");
+ flash_perror(rc);
+ return (1);
+ }
#endif
printf("flash erased, programming from 0x%lx 0x%lx Bytes\n",src,size);
- if ((rc = flash_write ((uchar *)src, start, size)) != 0) {
- puts ("ERROR ");
- flash_perror (rc);
+ if ((rc = flash_write (src, start, size)) != 0) {
+ puts("ERROR ");
+ flash_perror(rc);
return (1);
}
- puts ("OK programming done\n");
+ puts("OK programming done\n");
return 0;
}
-int mpl_prg_image(unsigned long ld_addr)
+static int
+mpl_prg_image(uchar *ld_addr)
{
- unsigned long data,len,checksum;
- image_header_t *hdr=&header;
+ unsigned long len, checksum;
+ uchar *data;
+ image_header_t *hdr = &header;
+ int rc;
+
/* Copy header so we can blank CRC field for re-calculation */
memcpy (&header, (char *)ld_addr, sizeof(image_header_t));
if (ntohl(hdr->ih_magic) != IH_MAGIC) {
- printf ("Bad Magic Number\n");
+ puts("Bad Magic Number\n");
return 1;
}
print_image_hdr(hdr);
if (hdr->ih_os != IH_OS_U_BOOT) {
- printf ("No U-Boot Image\n");
+ puts("No U-Boot Image\n");
return 1;
}
if (hdr->ih_type != IH_TYPE_FIRMWARE) {
- printf ("No Firmware Image\n");
+ puts("No Firmware Image\n");
return 1;
}
- data = (ulong)&header;
+ data = (uchar *)&header;
len = sizeof(image_header_t);
checksum = ntohl(hdr->ih_hcrc);
hdr->ih_hcrc = 0;
if (crc32 (0, (char *)data, len) != checksum) {
- printf ("Bad Header Checksum\n");
+ puts("Bad Header Checksum\n");
return 1;
}
data = ld_addr + sizeof(image_header_t);
len = ntohl(hdr->ih_size);
- printf ("Verifying Checksum ... ");
+ puts("Verifying Checksum ... ");
if (crc32 (0, (char *)data, len) != ntohl(hdr->ih_dcrc)) {
- printf ("Bad Data CRC\n");
+ puts("Bad Data CRC\n");
return 1;
}
- switch (hdr->ih_comp) {
- case IH_COMP_NONE:
- break;
- case IH_COMP_GZIP:
- printf (" Uncompressing ... ");
- if (gunzip ((void *)(data+0x100000), 0x400000,
- (uchar *)data, (int *)&len) != 0) {
- printf ("GUNZIP ERROR\n");
+ puts("OK\n");
+
+ if (hdr->ih_comp != IH_COMP_NONE) {
+ uchar *buf;
+ /* reserve space for uncompressed image */
+ if ((buf = malloc(IMAGE_SIZE)) == NULL) {
+ puts("Insufficient space for decompression\n");
return 1;
}
- data+=0x100000;
- break;
- default:
- printf (" Unimplemented compression type %d\n", hdr->ih_comp);
- return 1;
+
+ switch (hdr->ih_comp) {
+ case IH_COMP_GZIP:
+ puts("Uncompressing (GZIP) ... ");
+ rc = gunzip ((void *)(buf), IMAGE_SIZE, data, (int *)&len);
+ if (rc != 0) {
+ puts("GUNZIP ERROR\n");
+ free(buf);
+ return 1;
+ }
+ puts("OK\n");
+ break;
+#if CONFIG_BZIP2
+ case IH_COMP_BZIP2:
+ puts("Uncompressing (BZIP2) ... ");
+ {
+ uint retlen = IMAGE_SIZE;
+ rc = BZ2_bzBuffToBuffDecompress ((char *)(buf), &retlen,
+ (char *)data, len, 0, 0);
+ len = retlen;
+ }
+ if (rc != BZ_OK) {
+ printf ("BUNZIP2 ERROR: %d\n", rc);
+ free(buf);
+ return 1;
+ }
+ puts("OK\n");
+ break;
+#endif
+ default:
+ printf ("Unimplemented compression type %d\n", hdr->ih_comp);
+ free(buf);
+ return 1;
+ }
+
+ rc = mpl_prg(buf, len);
+ free(buf);
+ } else {
+ rc = mpl_prg(data, len);
}
-
- printf (" OK\n");
- return(mpl_prg(data,len));
+
+ return(rc);
}
@@ -199,20 +241,20 @@
get_backup_values(&back);
if(!overwrite) {
if(strncmp(back.signature,"MPL\0",4)==0) {
- printf("Not possible to write Backup\n");
+ puts("Not possible to write Backup\n");
return;
}
}
memcpy(back.signature,"MPL\0",4);
i = getenv_r("serial#",back.serial_name,16);
if(i < 0) {
- printf("Not possible to write Backup\n");
+ puts("Not possible to write Backup\n");
return;
}
back.serial_name[16]=0;
i = getenv_r("ethaddr",back.eth_addr,20);
if(i < 0) {
- printf("Not possible to write Backup\n");
+ puts("Not possible to write Backup\n");
return;
}
back.eth_addr[20]=0;
@@ -334,7 +376,7 @@
}
else {
copy_old_env(oldsizes[i]);
- printf ("INFO: old environment ajusted, use saveenv\n");
+ puts("INFO: old environment ajusted, use saveenv\n");
}
}
else {
@@ -353,23 +395,23 @@
void show_stdio_dev(void)
{
/* Print information */
- printf ("In: ");
+ puts("In: ");
if (stdio_devices[stdin] == NULL) {
- printf ("No input devices available!\n");
+ puts("No input devices available!\n");
} else {
printf ("%s\n", stdio_devices[stdin]->name);
}
- printf ("Out: ");
+ puts("Out: ");
if (stdio_devices[stdout] == NULL) {
- printf ("No output devices available!\n");
+ puts("No output devices available!\n");
} else {
printf ("%s\n", stdio_devices[stdout]->name);
}
- printf ("Err: ");
+ puts("Err: ");
if (stdio_devices[stderr] == NULL) {
- printf ("No error devices available!\n");
+ puts("No error devices available!\n");
} else {
printf ("%s\n", stdio_devices[stderr]->name);
}
@@ -390,7 +432,7 @@
if (strcmp(argv[2], "floppy") == 0) {
char *local_args[3];
extern int do_fdcboot (cmd_tbl_t *, int, int, char *[]);
- printf ("\nupdating bootloader image from floppy\n");
+ puts("\nupdating bootloader image from floppy\n");
local_args[0] = argv[0];
if(argc==4) {
local_args[1] = argv[3];
@@ -415,12 +457,12 @@
ld_addr=load_addr;
}
printf ("\nupdating bootloader image from memory at %lX\n",ld_addr);
- result=mpl_prg_image(ld_addr);
+ result=mpl_prg_image((uchar *)ld_addr);
return result;
}
if (strcmp(argv[2], "mps") == 0) {
- printf ("\nupdating bootloader image from MPS\n");
- result=mpl_prg(src,size);
+ puts("\nupdating bootloader image from MPS\n");
+ result=mpl_prg((uchar *)src,size);
return result;
}
}