BuR: Drop old LCD code

This relies on the old LCD implementation which is to be removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/board/BuR/brxre1/board.c b/board/BuR/brxre1/board.c
index 544e09f..a909104 100644
--- a/board/BuR/brxre1/board.c
+++ b/board/BuR/brxre1/board.c
@@ -164,21 +164,12 @@
 	br_resetc_bmode();
 
 	/* setup othbootargs for bootvx-command (vxWorks bootline) */
-#ifdef CONFIG_LCD
 	snprintf(othbootargs, sizeof(othbootargs),
 		 "u=vxWorksFTP pw=vxWorks o=0x%08x;0x%08x;0x%08x;0x%08x",
-		 (u32)gd->fb_base - 0x20,
-		 (u32)env_get_ulong("vx_memtop", 16, gd->fb_base - 0x20),
-		 (u32)env_get_ulong("vx_romfsbase", 16, 0),
-		 (u32)env_get_ulong("vx_romfssize", 16, 0));
-#else
-	snprintf(othbootargs, sizeof(othbootargs),
-		 "u=vxWorksFTP pw=vxWorks o=0x%08x;0x%08x;0x%08x;0x%08x",
 		 (u32)gd->relocaddr,
 		 (u32)env_get_ulong("vx_memtop", 16, gd->relocaddr),
 		 (u32)env_get_ulong("vx_romfsbase", 16, 0),
 		 (u32)env_get_ulong("vx_romfssize", 16, 0));
-#endif
 	env_set("othbootargs", othbootargs);
 	/*
 	 * reset VBAR registers to its reset location, VxWorks 6.9.3.2 does
diff --git a/board/BuR/common/br_resetc.c b/board/BuR/common/br_resetc.c
index 5006687..32f32b6 100644
--- a/board/BuR/common/br_resetc.c
+++ b/board/BuR/common/br_resetc.c
@@ -23,14 +23,8 @@
 #define BMODE_PME		12
 #define BMODE_DIAG		15
 
-#if CONFIG_IS_ENABLED(LCD) && !CONFIG_IS_ENABLED(DM_VIDEO)
-#include <lcd.h>
-#define LCD_SETCURSOR(x, y)	lcd_position_cursor(x, y)
-#define LCD_PUTS(x)		lcd_puts(x)
-#else
 #define LCD_SETCURSOR(x, y)
 #define LCD_PUTS(x)
-#endif /* CONFIG_LCD */
 
 static const char *bootmodeascii[16] = {
 	"BOOT",		"reserved",	"reserved",	"reserved",
diff --git a/board/BuR/common/bur_common.h b/board/BuR/common/bur_common.h
index 79c9af1..55d14c2 100644
--- a/board/BuR/common/bur_common.h
+++ b/board/BuR/common/bur_common.h
@@ -11,12 +11,6 @@
 #ifndef _BUR_COMMON_H_
 #define _BUR_COMMON_H_
 
-#if !CONFIG_IS_ENABLED(DM_VIDEO)
-#include <../../../drivers/video/ti/am335x-fb.h>
-
-int load_lcdtiming(struct am335x_lcdpanel *panel);
-#endif
-
 void br_summaryscreen(void);
 void pmicsetup(u32 mpupll, unsigned int bus);
 void enable_uart0_pin_mux(void);
diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c
index 78bf7d6..c6126e2 100644
--- a/board/BuR/common/common.c
+++ b/board/BuR/common/common.c
@@ -22,230 +22,6 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 /* --------------------------------------------------------------------------*/
-#if defined(CONFIG_LCD) && defined(CONFIG_AM335X_LCD) && \
-	!defined(CONFIG_DM_VIDEO) && !defined(CONFIG_SPL_BUILD)
-#include <asm/arch/hardware.h>
-#include <asm/arch/cpu.h>
-#include <asm/gpio.h>
-#include <power/tps65217.h>
-#include "../../../drivers/video/ti/am335x-fb.h"
-
-void lcdbacklight(int on)
-{
-	unsigned int driver = env_get_ulong("ds1_bright_drv", 16, 0UL);
-	unsigned int bright = env_get_ulong("ds1_bright_def", 10, 50);
-	unsigned int pwmfrq = env_get_ulong("ds1_pwmfreq", 10, ~0UL);
-	unsigned int tmp;
-	struct gptimer *timerhw;
-
-	if (on)
-		bright = bright != ~0UL ? bright : 50;
-	else
-		bright = 0;
-
-	switch (driver) {
-	case 2:
-		timerhw = (struct gptimer *)DM_TIMER5_BASE;
-		break;
-	default:
-		timerhw = (struct gptimer *)DM_TIMER6_BASE;
-	}
-
-	switch (driver) {
-	case 0:	/* PMIC LED-Driver */
-		/* brightness level */
-		tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
-				   TPS65217_WLEDCTRL2, bright, 0xFF);
-		/* current sink */
-		tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
-				   TPS65217_WLEDCTRL1,
-				   bright != 0 ? 0x0A : 0x02,
-				   0xFF);
-		break;
-	case 1:
-	case 2: /* PWM using timer */
-		if (pwmfrq != ~0UL) {
-			timerhw->tiocp_cfg = TCFG_RESET;
-			udelay(10);
-			while (timerhw->tiocp_cfg & TCFG_RESET)
-				;
-			tmp = ~0UL-(V_OSCK/pwmfrq);	/* bottom value */
-			timerhw->tldr = tmp;
-			timerhw->tcrr = tmp;
-			tmp = tmp + ((V_OSCK/pwmfrq)/100) * bright;
-			timerhw->tmar = tmp;
-			timerhw->tclr = (TCLR_PT | (2 << TCLR_TRG_SHIFT) |
-					TCLR_CE | TCLR_AR | TCLR_ST);
-		} else {
-			puts("invalid pwmfrq in env/dtb! skip PWM-setup.\n");
-		}
-		break;
-	default:
-		puts("no suitable backlightdriver in env/dtb!\n");
-		break;
-	}
-}
-
-int load_lcdtiming(struct am335x_lcdpanel *panel)
-{
-	struct am335x_lcdpanel pnltmp;
-
-	pnltmp.hactive = env_get_ulong("ds1_hactive", 10, ~0UL);
-	pnltmp.vactive = env_get_ulong("ds1_vactive", 10, ~0UL);
-	pnltmp.bpp = env_get_ulong("ds1_bpp", 10, ~0UL);
-	pnltmp.hfp = env_get_ulong("ds1_hfp", 10, ~0UL);
-	pnltmp.hbp = env_get_ulong("ds1_hbp", 10, ~0UL);
-	pnltmp.hsw = env_get_ulong("ds1_hsw", 10, ~0UL);
-	pnltmp.vfp = env_get_ulong("ds1_vfp", 10, ~0UL);
-	pnltmp.vbp = env_get_ulong("ds1_vbp", 10, ~0UL);
-	pnltmp.vsw = env_get_ulong("ds1_vsw", 10, ~0UL);
-	pnltmp.pxl_clk = env_get_ulong("ds1_pxlclk", 10, ~0UL);
-	pnltmp.pol = env_get_ulong("ds1_pol", 16, ~0UL);
-	pnltmp.pup_delay = env_get_ulong("ds1_pupdelay", 10, ~0UL);
-	pnltmp.pon_delay = env_get_ulong("ds1_tondelay", 10, ~0UL);
-	panel_info.vl_rot = env_get_ulong("ds1_rotation", 10, 0);
-
-	if (
-	   ~0UL == (pnltmp.hactive) ||
-	   ~0UL == (pnltmp.vactive) ||
-	   ~0UL == (pnltmp.bpp) ||
-	   ~0UL == (pnltmp.hfp) ||
-	   ~0UL == (pnltmp.hbp) ||
-	   ~0UL == (pnltmp.hsw) ||
-	   ~0UL == (pnltmp.vfp) ||
-	   ~0UL == (pnltmp.vbp) ||
-	   ~0UL == (pnltmp.vsw) ||
-	   ~0UL == (pnltmp.pxl_clk) ||
-	   ~0UL == (pnltmp.pol) ||
-	   ~0UL == (pnltmp.pup_delay) ||
-	   ~0UL == (pnltmp.pon_delay)
-	   ) {
-		puts("lcd-settings in env/dtb incomplete!\n");
-		printf("display-timings:\n"
-			"================\n"
-			"hactive: %d\n"
-			"vactive: %d\n"
-			"bpp    : %d\n"
-			"hfp    : %d\n"
-			"hbp    : %d\n"
-			"hsw    : %d\n"
-			"vfp    : %d\n"
-			"vbp    : %d\n"
-			"vsw    : %d\n"
-			"pxlclk : %d\n"
-			"pol    : 0x%08x\n"
-			"pondly : %d\n",
-			pnltmp.hactive, pnltmp.vactive, pnltmp.bpp,
-			pnltmp.hfp, pnltmp.hbp, pnltmp.hsw,
-			pnltmp.vfp, pnltmp.vbp, pnltmp.vsw,
-			pnltmp.pxl_clk, pnltmp.pol, pnltmp.pon_delay);
-
-		return -1;
-	}
-	debug("lcd-settings in env complete, taking over.\n");
-	memcpy((void *)panel,
-	       (void *)&pnltmp,
-	       sizeof(struct am335x_lcdpanel));
-
-	return 0;
-}
-
-static void br_summaryscreen_printenv(char *prefix,
-				       char *name, char *altname,
-				       char *suffix)
-{
-	char *envval = env_get(name);
-	if (0 != envval) {
-		lcd_printf("%s %s %s", prefix, envval, suffix);
-	} else if (0 != altname) {
-		envval = env_get(altname);
-		if (0 != envval)
-			lcd_printf("%s %s %s", prefix, envval, suffix);
-	} else {
-		lcd_printf("\n");
-	}
-}
-
-void br_summaryscreen(void)
-{
-	br_summaryscreen_printenv(" - B&R -", "br_orderno", 0, "-\n");
-	br_summaryscreen_printenv(" Serial/Rev :", "br_serial", 0, "\n");
-	br_summaryscreen_printenv(" MAC1       :", "br_mac1", "ethaddr", "\n");
-	br_summaryscreen_printenv(" MAC2       :", "br_mac2", 0, "\n");
-	lcd_puts(" Bootloader : " PLAIN_VERSION "\n");
-	lcd_puts("\n");
-}
-
-void lcdpower(int on)
-{
-	u32 pin, swval, i;
-	char buf[16] = { 0 };
-
-	pin = env_get_ulong("ds1_pwr", 16, ~0UL);
-
-	if (pin == ~0UL) {
-		puts("no pwrpin in dtb/env, cannot powerup display!\n");
-		return;
-	}
-
-	for (i = 0; i < 3; i++) {
-		if (pin != 0) {
-			snprintf(buf, sizeof(buf), "ds1_pwr#%d", i);
-			if (gpio_request(pin & 0x7F, buf) != 0) {
-				printf("%s: not able to request gpio %s",
-				       __func__, buf);
-				continue;
-			}
-			swval = pin & 0x80 ? 0 : 1;
-			if (on)
-				gpio_direction_output(pin & 0x7F, swval);
-			else
-				gpio_direction_output(pin & 0x7F, !swval);
-
-			debug("switched pin %d to %d\n", pin & 0x7F, swval);
-		}
-		pin >>= 8;
-	}
-}
-
-vidinfo_t	panel_info = {
-		.vl_col = 1366,	/*
-				 * give full resolution for allocating enough
-				 * memory
-				 */
-		.vl_row = 768,
-		.vl_bpix = 5,
-		.priv = 0
-};
-
-void lcd_ctrl_init(void *lcdbase)
-{
-	struct am335x_lcdpanel lcd_panel;
-
-	memset(&lcd_panel, 0, sizeof(struct am335x_lcdpanel));
-	if (load_lcdtiming(&lcd_panel) != 0)
-		return;
-
-	lcd_panel.panel_power_ctrl = &lcdpower;
-
-	if (0 != am335xfb_init(&lcd_panel))
-		printf("ERROR: failed to initialize video!");
-	/*
-	 * modifiy panel info to 'real' resolution, to operate correct with
-	 * lcd-framework.
-	 */
-	panel_info.vl_col = lcd_panel.hactive;
-	panel_info.vl_row = lcd_panel.vactive;
-
-	lcd_set_flush_dcache(1);
-}
-
-void lcd_enable(void)
-{
-	br_summaryscreen();
-	lcdbacklight(1);
-}
-#endif /* CONFIG_LCD */
 
 int ft_board_setup(void *blob, struct bd_info *bd)
 {