diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index ccf4b35..32a4679 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -42,6 +42,12 @@
 	  Select this dram controller driver for Sun9i platforms,
 	  like A80.
 
+config DRAM_SUN50I_H6
+	bool
+	help
+	  Select this dram controller driver for some sun50i platforms,
+	  like H6.
+
 config SUN6I_P2WI
 	bool "Allwinner sun6i internal P2WI controller"
 	help
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 97a4f22..43a93e3 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -38,4 +38,5 @@
 obj-$(CONFIG_SPL_SPI_SUNXI)	+= spl_spi_sunxi.o
 obj-$(CONFIG_SUNXI_DRAM_DW)	+= dram_sunxi_dw.o
 obj-$(CONFIG_SUNXI_DRAM_DW)	+= dram_timings/
+obj-$(CONFIG_DRAM_SUN50I_H6)	+= dram_sun50i_h6.o
 endif
diff --git a/arch/arm/mach-sunxi/dram_sun50i_h6.c b/arch/arm/mach-sunxi/dram_sun50i_h6.c
new file mode 100644
index 0000000..6b94cf3
--- /dev/null
+++ b/arch/arm/mach-sunxi/dram_sun50i_h6.c
@@ -0,0 +1,755 @@
+/*
+ * sun50i H6 platform dram controller init
+ *
+ * (C) Copyright 2017      Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/cpu.h>
+#include <linux/bitops.h>
+#include <linux/kconfig.h>
+
+/*
+ * The DRAM controller structure on H6 is similar to the ones on A23/A80:
+ * they all contains 3 parts, COM, CTL and PHY. (As a note on A33/A83T/H3/A64
+ * /H5/R40 CTL and PHY is composed).
+ *
+ * COM is allwinner-specific. On H6, the address mapping function is moved
+ * from COM to CTL (with the standard ADDRMAP registers on DesignWare memory
+ * controller).
+ *
+ * CTL (controller) and PHY is from DesignWare.
+ *
+ * The CTL part is a bit similar to the one on A23/A80 (because they all
+ * originate from DesignWare), but gets more registers added.
+ *
+ * The PHY part is quite new, not seen in any previous Allwinner SoCs, and
+ * not seen on other SoCs in U-Boot. The only SoC that is also known to have
+ * similar PHY is ZynqMP.
+ */
+
+/*
+ * The delay parameters below allow to allegedly specify delay times of some
+ * unknown unit for each individual bit trace in each of the four data bytes
+ * the 32-bit wide access consists of. Also three control signals can be
+ * adjusted individually.
+ */
+#define NR_OF_BYTE_LANES	(32 / BITS_PER_BYTE)
+/* The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable and DQSN */
+#define WR_LINES_PER_BYTE_LANE	(BITS_PER_BYTE + 4)
+/*
+ * The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable, DQSN,
+ * Termination and Power down
+ */
+#define RD_LINES_PER_BYTE_LANE	(BITS_PER_BYTE + 6)
+struct dram_para {
+	u32 clk;
+	enum sunxi_dram_type type;
+	u8 cols;
+	u8 rows;
+	u8 ranks;
+	const u8 dx_read_delays[NR_OF_BYTE_LANES][RD_LINES_PER_BYTE_LANE];
+	const u8 dx_write_delays[NR_OF_BYTE_LANES][WR_LINES_PER_BYTE_LANE];
+};
+
+static void mctl_sys_init(struct dram_para *para);
+static void mctl_com_init(struct dram_para *para);
+static void mctl_set_timing_lpddr3(struct dram_para *para);
+static void mctl_channel_init(struct dram_para *para);
+
+static void mctl_core_init(struct dram_para *para)
+{
+	mctl_sys_init(para);
+	mctl_com_init(para);
+	switch (para->type) {
+	case SUNXI_DRAM_TYPE_LPDDR3:
+		mctl_set_timing_lpddr3(para);
+		break;
+	default:
+		panic("Unsupported DRAM type!");
+	};
+	mctl_channel_init(para);
+}
+
+static void mctl_phy_pir_init(u32 val)
+{
+	struct sunxi_mctl_phy_reg * const mctl_phy =
+			(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+
+	writel(val | BIT(0), &mctl_phy->pir);
+	mctl_await_completion(&mctl_phy->pgsr[0], BIT(0), BIT(0));
+}
+
+enum {
+	MBUS_PORT_CPU           = 0,
+	MBUS_PORT_GPU           = 1,
+	MBUS_PORT_MAHB          = 2,
+	MBUS_PORT_DMA           = 3,
+	MBUS_PORT_VE            = 4,
+	MBUS_PORT_CE            = 5,
+	MBUS_PORT_TSC0          = 6,
+	MBUS_PORT_NDFC0         = 8,
+	MBUS_PORT_CSI0          = 11,
+	MBUS_PORT_DI0           = 14,
+	MBUS_PORT_DI1           = 15,
+	MBUS_PORT_DE300         = 16,
+	MBUS_PORT_IOMMU         = 25,
+	MBUS_PORT_VE2           = 26,
+	MBUS_PORT_USB3        = 37,
+	MBUS_PORT_PCIE          = 38,
+	MBUS_PORT_VP9           = 39,
+	MBUS_PORT_HDCP2       = 40,
+};
+
+enum {
+	MBUS_QOS_LOWEST = 0,
+	MBUS_QOS_LOW,
+	MBUS_QOS_HIGH,
+	MBUS_QOS_HIGHEST
+};
+inline void mbus_configure_port(u8 port,
+				bool bwlimit,
+				bool priority,
+				u8 qos,
+				u8 waittime,
+				u8 acs,
+				u16 bwl0,
+				u16 bwl1,
+				u16 bwl2)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	const u32 cfg0 = ( (bwlimit ? (1 << 0) : 0)
+			   | (priority ? (1 << 1) : 0)
+			   | ((qos & 0x3) << 2)
+			   | ((waittime & 0xf) << 4)
+			   | ((acs & 0xff) << 8)
+			   | (bwl0 << 16) );
+	const u32 cfg1 = ((u32)bwl2 << 16) | (bwl1 & 0xffff);
+
+	debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1);
+	writel(cfg0, &mctl_com->master[port].cfg0);
+	writel(cfg1, &mctl_com->master[port].cfg1);
+}
+
+#define MBUS_CONF(port, bwlimit, qos, acs, bwl0, bwl1, bwl2)	\
+	mbus_configure_port(MBUS_PORT_ ## port, bwlimit, false, \
+			    MBUS_QOS_ ## qos, 0, acs, bwl0, bwl1, bwl2)
+
+static void mctl_set_master_priority(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	/* enable bandwidth limit windows and set windows size 1us */
+	writel(399, &mctl_com->tmr);
+	writel(BIT(16), &mctl_com->bwcr);
+
+	MBUS_CONF(  CPU,  true, HIGHEST, 0,  256,  128,  100);
+	MBUS_CONF(  GPU,  true,    HIGH, 0, 1536, 1400,  256);
+	MBUS_CONF( MAHB,  true, HIGHEST, 0,  512,  256,   96);
+	MBUS_CONF(  DMA,  true,    HIGH, 0,  256,  100,   80);
+	MBUS_CONF(   VE,  true,    HIGH, 2, 8192, 5500, 5000);
+	MBUS_CONF(   CE,  true,    HIGH, 2,  100,   64,   32);
+	MBUS_CONF( TSC0,  true,    HIGH, 2,  100,   64,   32);
+	MBUS_CONF(NDFC0,  true,    HIGH, 0,  256,  128,   64);
+	MBUS_CONF( CSI0,  true,    HIGH, 0,  256,  128,  100);
+	MBUS_CONF(  DI0,  true,    HIGH, 0, 1024,  256,   64);
+	MBUS_CONF(DE300,  true, HIGHEST, 6, 8192, 2800, 2400);
+	MBUS_CONF(IOMMU,  true, HIGHEST, 0,  100,   64,   32);
+	MBUS_CONF(  VE2,  true,    HIGH, 2, 8192, 5500, 5000);
+	MBUS_CONF( USB3,  true,    HIGH, 0,  256,  128,   64);
+	MBUS_CONF( PCIE,  true,    HIGH, 2,  100,   64,   32);
+	MBUS_CONF(  VP9,  true,    HIGH, 2, 8192, 5500, 5000);
+	MBUS_CONF(HDCP2,  true,    HIGH, 2,  100,   64,   32);
+}
+
+static u32 mr_lpddr3[12] = {
+	0x00000000, 0x00000043, 0x0000001a, 0x00000001,
+	0x00000000, 0x00000000, 0x00000048, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000003,
+};
+
+/* TODO: flexible timing */
+static void mctl_set_timing_lpddr3(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	struct sunxi_mctl_phy_reg * const mctl_phy =
+			(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+
+	u8 tccd		= 2;
+	u8 tfaw		= max(ns_to_t(50), 4);
+	u8 trrd		= max(ns_to_t(10), 2);
+	u8 trcd		= max(ns_to_t(24), 2);
+	u8 trc		= ns_to_t(70);
+	u8 txp		= max(ns_to_t(8), 2);
+	u8 twtr		= max(ns_to_t(8), 2);
+	u8 trtp		= max(ns_to_t(8), 2);
+	u8 twr		= max(ns_to_t(15), 2);
+	u8 trp		= ns_to_t(18);
+	u8 tras		= ns_to_t(42);
+	u8 twtr_sa	= ns_to_t(5);
+	u8 tcksrea	= ns_to_t(11);
+	u16 trefi	= ns_to_t(3900) / 32;
+	u16 trfc	= ns_to_t(210);
+	u16 txsr	= ns_to_t(220);
+
+	if (CONFIG_DRAM_CLK % 400 == 0) {
+		/* Round up these parameters */
+		twtr_sa++;
+		tcksrea++;
+	}
+
+	u8 tmrw		= 5;
+	u8 tmrd		= 5;
+	u8 tmod		= 12;
+	u8 tcke		= 3;
+	u8 tcksrx	= 5;
+	u8 tcksre	= 5;
+	u8 tckesr	= 5;
+	u8 trasmax	= CONFIG_DRAM_CLK / 60;
+	u8 txs		= 4;
+	u8 txsdll	= 4;
+	u8 txsabort	= 4;
+	u8 txsfast	= 4;
+
+	u8 tcl		= 5; /* CL 10 */
+	u8 tcwl		= 3; /* CWL 6 */
+	u8 t_rdata_en	= twtr_sa + 8;
+
+	u32 tdinit0	= (200 * CONFIG_DRAM_CLK) + 1;		/* 200us */
+	u32 tdinit1	= (100 * CONFIG_DRAM_CLK) / 1000 + 1;	/* 100ns */
+	u32 tdinit2	= (11 * CONFIG_DRAM_CLK) + 1;		/* 11us */
+	u32 tdinit3	= (1 * CONFIG_DRAM_CLK) + 1;		/* 1us */
+
+	u8 twtp		= tcwl + 4 + twr + 1;
+	/*
+	 * The code below for twr2rd and trd2wr follows the IP core's
+	 * document from ZynqMP and i.MX7. The BSP has both number
+	 * substracted by 2.
+	 */
+	u8 twr2rd	= tcwl + 4 + 1 + twtr;
+	u8 trd2wr	= tcl + 4 + (tcksrea >> 1) - tcwl + 1;
+
+	/* set mode register */
+	memcpy(mctl_phy->mr, mr_lpddr3, sizeof(mr_lpddr3));
+
+	/* set DRAM timing */
+	writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras,
+	       &mctl_ctl->dramtmg[0]);
+	writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]);
+	writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd,
+	       &mctl_ctl->dramtmg[2]);
+	writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]);
+	writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp,
+	       &mctl_ctl->dramtmg[4]);
+	writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke,
+	       &mctl_ctl->dramtmg[5]);
+	/* Value suggested by ZynqMP manual and used by libdram */
+	writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]);
+	writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs,
+	       &mctl_ctl->dramtmg[8]);
+	writel(txsr, &mctl_ctl->dramtmg[14]);
+
+	clrsetbits_le32(&mctl_ctl->init[0], (3 << 30), (1 << 30));
+	writel(0, &mctl_ctl->dfimisc);
+	clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660);
+
+	/*
+	 * Set timing registers of the PHY.
+	 * Note: the PHY is clocked 2x from the DRAM frequency.
+	 */
+	writel((trrd << 25) | (tras << 17) | (trp << 9) | (trtp << 1),
+	       &mctl_phy->dtpr[0]);
+	writel((tfaw << 17) | 0x28000400 | (tmrd << 1), &mctl_phy->dtpr[1]);
+	writel(((txs << 6) - 1) | (tcke << 17), &mctl_phy->dtpr[2]);
+	writel(((txsdll << 22) - (0x1 << 16)) | twtr_sa | (tcksrea << 8),
+	       &mctl_phy->dtpr[3]);
+	writel((txp << 1) | (trfc << 17) | 0x800, &mctl_phy->dtpr[4]);
+	writel((trc << 17) | (trcd << 9) | (twtr << 1), &mctl_phy->dtpr[5]);
+	writel(0x0505, &mctl_phy->dtpr[6]);
+
+	/* Configure DFI timing */
+	writel(tcl | 0x2000200 | (t_rdata_en << 16) | 0x808000,
+	       &mctl_ctl->dfitmg0);
+	writel(0x040201, &mctl_ctl->dfitmg1);
+
+	/* Configure PHY timing */
+	writel(tdinit0 | (tdinit1 << 20), &mctl_phy->ptr[3]);
+	writel(tdinit2 | (tdinit3 << 18), &mctl_phy->ptr[4]);
+
+	/* set refresh timing */
+	writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg);
+}
+
+static void mctl_sys_init(struct dram_para *para)
+{
+	struct sunxi_ccm_reg * const ccm =
+			(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	/* Put all DRAM-related blocks to reset state */
+	clrbits_le32(&ccm->mbus_cfg, MBUS_ENABLE | MBUS_RESET);
+	writel(0, &ccm->dram_gate_reset);
+	clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
+	clrbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET);
+
+	udelay(5);
+
+	/* Set PLL5 rate to doubled DRAM clock rate */
+	writel(CCM_PLL5_CTRL_EN | CCM_PLL5_LOCK_EN |
+	       CCM_PLL5_CTRL_N(para->clk * 2 / 24 - 1), &ccm->pll5_cfg);
+	mctl_await_completion(&ccm->pll5_cfg, CCM_PLL5_LOCK, CCM_PLL5_LOCK);
+
+	/* Configure DRAM mod clock */
+	writel(DRAM_CLK_SRC_PLL5, &ccm->dram_clk_cfg);
+	setbits_le32(&ccm->dram_clk_cfg, DRAM_CLK_UPDATE);
+	writel(BIT(0) | BIT(RESET_SHIFT), &ccm->dram_gate_reset);
+
+	/* Disable all channels */
+	writel(0, &mctl_com->maer0);
+	writel(0, &mctl_com->maer1);
+	writel(0, &mctl_com->maer2);
+
+	/* Configure MBUS and enable DRAM mod reset */
+	setbits_le32(&ccm->mbus_cfg, MBUS_RESET);
+	setbits_le32(&ccm->mbus_cfg, MBUS_ENABLE);
+	setbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET);
+	udelay(5);
+
+	/* Unknown hack from the BSP, which enables access of mctl_ctl regs */
+	writel(0x8000, &mctl_ctl->unk_0x00c);
+}
+
+static void mctl_set_addrmap(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	u8 cols = para->cols;
+	u8 rows = para->rows;
+	u8 ranks = para->ranks;
+
+	/* Ranks */
+	if (ranks == 2)
+		mctl_ctl->addrmap[0] = rows + cols - 3;
+	else
+		mctl_ctl->addrmap[0] = 0x1F;
+
+	/* Banks, hardcoded to 8 banks now */
+	mctl_ctl->addrmap[1] = (cols - 2) | (cols - 2) << 8 | (cols - 2) << 16;
+
+	/* Columns */
+	mctl_ctl->addrmap[2] = 0;
+	switch (cols) {
+	case 8:
+		mctl_ctl->addrmap[3] = 0x1F1F0000;
+		mctl_ctl->addrmap[4] = 0x1F1F;
+		break;
+	case 9:
+		mctl_ctl->addrmap[3] = 0x1F000000;
+		mctl_ctl->addrmap[4] = 0x1F1F;
+		break;
+	case 10:
+		mctl_ctl->addrmap[3] = 0;
+		mctl_ctl->addrmap[4] = 0x1F1F;
+		break;
+	case 11:
+		mctl_ctl->addrmap[3] = 0;
+		mctl_ctl->addrmap[4] = 0x1F00;
+		break;
+	case 12:
+		mctl_ctl->addrmap[3] = 0;
+		mctl_ctl->addrmap[4] = 0;
+		break;
+	default:
+		panic("Unsupported DRAM configuration: column number invalid\n");
+	}
+
+	/* Rows */
+	mctl_ctl->addrmap[5] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
+	switch (rows) {
+	case 13:
+		mctl_ctl->addrmap[6] = (cols - 3) | 0x0F0F0F00;
+		mctl_ctl->addrmap[7] = 0x0F0F;
+		break;
+	case 14:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | 0x0F0F0000;
+		mctl_ctl->addrmap[7] = 0x0F0F;
+		break;
+	case 15:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | 0x0F000000;
+		mctl_ctl->addrmap[7] = 0x0F0F;
+		break;
+	case 16:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
+		mctl_ctl->addrmap[7] = 0x0F0F;
+		break;
+	case 17:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
+		mctl_ctl->addrmap[7] = (cols - 3) | 0x0F00;
+		break;
+	case 18:
+		mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
+		mctl_ctl->addrmap[7] = (cols - 3) | ((cols - 3) << 8);
+		break;
+	default:
+		panic("Unsupported DRAM configuration: row number invalid\n");
+	}
+
+	/* Bank groups, DDR4 only */
+	mctl_ctl->addrmap[8] = 0x3F3F;
+}
+
+static void mctl_com_init(struct dram_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	struct sunxi_mctl_phy_reg * const mctl_phy =
+			(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+	u32 reg_val, tmp;
+
+	mctl_set_addrmap(para);
+
+	setbits_le32(&mctl_com->cr, BIT(31));
+	/*
+	 * This address is magic; it's in SID memory area, but there's no
+	 * known definition of it.
+	 * On my Pine H64 board it has content 7.
+	 */
+	if (readl(0x03006100) == 7)
+		clrbits_le32(&mctl_com->cr, BIT(27));
+	else if (readl(0x03006100) == 3)
+		setbits_le32(&mctl_com->cr, BIT(27));
+
+	if (para->clk > 408)
+		reg_val = 0xf00;
+	else if (para->clk > 246)
+		reg_val = 0x1f00;
+	else
+		reg_val = 0x3f00;
+	clrsetbits_le32(&mctl_com->unk_0x008, 0x3f00, reg_val);
+
+	/* TODO: half DQ, non-LPDDR3 types */
+	writel(MSTR_DEVICETYPE_LPDDR3 | MSTR_BUSWIDTH_FULL |
+	       MSTR_BURST_LENGTH(8) | MSTR_ACTIVE_RANKS(para->ranks) |
+	       0x80000000, &mctl_ctl->mstr);
+	writel(DCR_LPDDR3 | DCR_DDR8BANK | 0x400, &mctl_phy->dcr);
+
+	if (para->ranks == 2)
+		writel(0x0303, &mctl_ctl->odtmap);
+	else
+		writel(0x0201, &mctl_ctl->odtmap);
+
+	/* TODO: non-LPDDR3 types */
+	tmp = para->clk * 7 / 2000;
+	reg_val = 0x0400;
+	reg_val |= (tmp + 7) << 24;
+	reg_val |= (((para->clk < 400) ? 3 : 4) - tmp) << 16;
+	writel(reg_val, &mctl_ctl->odtcfg);
+
+	/* TODO: half DQ */
+}
+
+static void mctl_bit_delay_set(struct dram_para *para)
+{
+	struct sunxi_mctl_phy_reg * const mctl_phy =
+			(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+	int i, j;
+	u32 val;
+
+	for (i = 0; i < 4; i++) {
+		val = readl(&mctl_phy->dx[i].bdlr0);
+		for (j = 0; j < 4; j++)
+			val += para->dx_write_delays[i][j] << (j * 8);
+		writel(val, &mctl_phy->dx[i].bdlr0);
+
+		val = readl(&mctl_phy->dx[i].bdlr1);
+		for (j = 0; j < 4; j++)
+			val += para->dx_write_delays[i][j + 4] << (j * 8);
+		writel(val, &mctl_phy->dx[i].bdlr1);
+
+		val = readl(&mctl_phy->dx[i].bdlr2);
+		for (j = 0; j < 4; j++)
+			val += para->dx_write_delays[i][j + 8] << (j * 8);
+		writel(val, &mctl_phy->dx[i].bdlr2);
+	}
+	clrbits_le32(&mctl_phy->pgcr[0], BIT(26));
+
+	for (i = 0; i < 4; i++) {
+		val = readl(&mctl_phy->dx[i].bdlr3);
+		for (j = 0; j < 4; j++)
+			val += para->dx_read_delays[i][j] << (j * 8);
+		writel(val, &mctl_phy->dx[i].bdlr3);
+
+		val = readl(&mctl_phy->dx[i].bdlr4);
+		for (j = 0; j < 4; j++)
+			val += para->dx_read_delays[i][j + 4] << (j * 8);
+		writel(val, &mctl_phy->dx[i].bdlr4);
+
+		val = readl(&mctl_phy->dx[i].bdlr5);
+		for (j = 0; j < 4; j++)
+			val += para->dx_read_delays[i][j + 8] << (j * 8);
+		writel(val, &mctl_phy->dx[i].bdlr5);
+
+		val = readl(&mctl_phy->dx[i].bdlr6);
+		val += (para->dx_read_delays[i][12] << 8) |
+		       (para->dx_read_delays[i][13] << 16);
+		writel(val, &mctl_phy->dx[i].bdlr6);
+	}
+	setbits_le32(&mctl_phy->pgcr[0], BIT(26));
+	udelay(1);
+
+	for (i = 1; i < 14; i++) {
+		val = readl(&mctl_phy->acbdlr[i]);
+		val += 0x0a0a0a0a;
+		writel(val, &mctl_phy->acbdlr[i]);
+	}
+}
+
+static void mctl_channel_init(struct dram_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	struct sunxi_mctl_phy_reg * const mctl_phy =
+			(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+	int i;
+	u32 val;
+
+	setbits_le32(&mctl_ctl->dfiupd[0], BIT(31) | BIT(30));
+	setbits_le32(&mctl_ctl->zqctl[0], BIT(31) | BIT(30));
+	writel(0x2f05, &mctl_ctl->sched[0]);
+	setbits_le32(&mctl_ctl->rfshctl3, BIT(0));
+	setbits_le32(&mctl_ctl->dfimisc, BIT(0));
+	setbits_le32(&mctl_ctl->unk_0x00c, BIT(8));
+	clrsetbits_le32(&mctl_phy->pgcr[1], 0x180, 0xc0);
+	/* TODO: non-LPDDR3 types */
+	clrsetbits_le32(&mctl_phy->pgcr[2], GENMASK(17, 0), ns_to_t(7800));
+	clrbits_le32(&mctl_phy->pgcr[6], BIT(0));
+	clrsetbits_le32(&mctl_phy->dxccr, 0xee0, 0x220);
+	/* TODO: VT compensation */
+	clrsetbits_le32(&mctl_phy->dsgcr, BIT(0), 0x440060);
+	clrbits_le32(&mctl_phy->vtcr[1], BIT(1));
+
+	for (i = 0; i < 4; i++)
+		clrsetbits_le32(&mctl_phy->dx[i].gcr[0], 0xe00, 0x800);
+	for (i = 0; i < 4; i++)
+		clrsetbits_le32(&mctl_phy->dx[i].gcr[2], 0xffff, 0x5555);
+	for (i = 0; i < 4; i++)
+		clrsetbits_le32(&mctl_phy->dx[i].gcr[3], 0x3030, 0x1010);
+
+	udelay(100);
+
+	if (para->ranks == 2)
+		setbits_le32(&mctl_phy->dtcr[1], 0x30000);
+	else
+		clrsetbits_le32(&mctl_phy->dtcr[1], 0x30000, 0x10000);
+
+	clrbits_le32(&mctl_phy->dtcr[1], BIT(1));
+	if (para->ranks == 2) {
+		writel(0x00010001, &mctl_phy->rankidr);
+		writel(0x20000, &mctl_phy->odtcr);
+	} else {
+		writel(0x0, &mctl_phy->rankidr);
+		writel(0x10000, &mctl_phy->odtcr);
+	}
+
+	/* TODO: non-LPDDR3 types */
+	clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000040);
+	if (para->clk <= 792) {
+		if (para->clk <= 672) {
+			if (para->clk <= 600)
+				val = 0x300;
+			else
+				val = 0x400;
+		} else {
+			val = 0x500;
+		}
+	} else {
+		val = 0x600;
+	}
+	/* FIXME: NOT REVIEWED YET */
+	clrsetbits_le32(&mctl_phy->zq[0].zqcr, 0x700, val);
+	clrsetbits_le32(&mctl_phy->zq[0].zqpr[0], 0xff,
+			CONFIG_DRAM_ZQ & 0xff);
+	clrbits_le32(&mctl_phy->zq[0].zqor[0], 0xfffff);
+	setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ >> 8) & 0xff);
+	setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ & 0xf00) - 0x100);
+	setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ & 0xff00) << 4);
+	clrbits_le32(&mctl_phy->zq[1].zqpr[0], 0xfffff);
+	setbits_le32(&mctl_phy->zq[1].zqpr[0], (CONFIG_DRAM_ZQ >> 16) & 0xff);
+	setbits_le32(&mctl_phy->zq[1].zqpr[0], ((CONFIG_DRAM_ZQ >> 8) & 0xf00) - 0x100);
+	setbits_le32(&mctl_phy->zq[1].zqpr[0], (CONFIG_DRAM_ZQ & 0xff0000) >> 4);
+	if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
+		for (i = 1; i < 14; i++)
+			writel(0x06060606, &mctl_phy->acbdlr[i]);
+	}
+
+	/* TODO: non-LPDDR3 types */
+	mctl_phy_pir_init(PIR_ZCAL | PIR_DCAL | PIR_PHYRST | PIR_DRAMINIT |
+			  PIR_QSGATE | PIR_RDDSKW | PIR_WRDSKW | PIR_RDEYE |
+			  PIR_WREYE);
+
+	/* TODO: non-LPDDR3 types */
+	for (i = 0; i < 4; i++)
+		writel(0x00000909, &mctl_phy->dx[i].gcr[5]);
+
+	for (i = 0; i < 4; i++) {
+		if (IS_ENABLED(CONFIG_DRAM_ODT_EN))
+			val = 0x0;
+		else
+			val = 0xaaaa;
+		clrsetbits_le32(&mctl_phy->dx[i].gcr[2], 0xffff, val);
+
+		if (IS_ENABLED(CONFIG_DRAM_ODT_EN))
+			val = 0x0;
+		else
+			val = 0x2020;
+		clrsetbits_le32(&mctl_phy->dx[i].gcr[3], 0x3030, val);
+	}
+
+	mctl_bit_delay_set(para);
+	udelay(1);
+
+	setbits_le32(&mctl_phy->pgcr[6], BIT(0));
+	clrbits_le32(&mctl_phy->pgcr[6], 0xfff8);
+	for (i = 0; i < 4; i++)
+		clrbits_le32(&mctl_phy->dx[i].gcr[3], ~0x3ffff);
+	udelay(10);
+
+	if (readl(&mctl_phy->pgsr[0]) & 0x400000)
+	{
+		/*
+		 * Detect single rank.
+		 * TODO: also detect half DQ.
+		 */
+		if ((readl(&mctl_phy->dx[0].rsr[0]) & 0x3) == 2 &&
+		    (readl(&mctl_phy->dx[1].rsr[0]) & 0x3) == 2 &&
+		    (readl(&mctl_phy->dx[2].rsr[0]) & 0x3) == 2 &&
+		    (readl(&mctl_phy->dx[3].rsr[0]) & 0x3) == 2) {
+			para->ranks = 1;
+			/* Restart DRAM initialization from scratch. */
+			mctl_core_init(para);
+			return;
+		}
+		else {
+			panic("This DRAM setup is currently not supported.\n");
+		}
+	}
+
+	if (readl(&mctl_phy->pgsr[0]) & 0xff00000) {
+		/* Oops! There's something wrong! */
+		debug("PLL = %x\n", readl(0x3001010));
+		debug("DRAM PHY PGSR0 = %x\n", readl(&mctl_phy->pgsr[0]));
+		for (i = 0; i < 4; i++)
+			debug("DRAM PHY DX%dRSR0 = %x\n", i, readl(&mctl_phy->dx[i].rsr[0]));
+		panic("Error while initializing DRAM PHY!\n");
+	}
+
+	clrsetbits_le32(&mctl_phy->dsgcr, 0xc0, 0x40);
+	clrbits_le32(&mctl_phy->pgcr[1], 0x40);
+	clrbits_le32(&mctl_ctl->dfimisc, BIT(0));
+	writel(1, &mctl_ctl->swctl);
+	mctl_await_completion(&mctl_ctl->swstat, 1, 1);
+	clrbits_le32(&mctl_ctl->rfshctl3, BIT(0));
+
+	setbits_le32(&mctl_com->unk_0x014, BIT(31));
+	writel(0xffffffff, &mctl_com->maer0);
+	writel(0x7ff, &mctl_com->maer1);
+	writel(0xffff, &mctl_com->maer2);
+}
+
+static void mctl_auto_detect_dram_size(struct dram_para *para)
+{
+	/* TODO: non-LPDDR3, half DQ */
+	/*
+	 * Detect rank number by the code in mctl_channel_init. Furtherly
+	 * when DQ detection is available it will also be executed there.
+	 */
+	mctl_core_init(para);
+
+	/* detect row address bits */
+	para->cols = 8;
+	para->rows = 18;
+	mctl_core_init(para);
+
+	for (para->rows = 13; para->rows < 18; para->rows++) {
+		/* 8 banks, 8 bit per byte and 32 bit width */
+		if (mctl_mem_matches((1 << (para->rows + para->cols + 5))))
+			break;
+	}
+
+	/* detect column address bits */
+	para->cols = 11;
+	mctl_core_init(para);
+
+	for (para->cols = 8; para->cols < 11; para->cols++) {
+		/* 8 bits per byte and 32 bit width */
+		if (mctl_mem_matches(1 << (para->cols + 2)))
+			break;
+	}
+}
+
+unsigned long mctl_calc_size(struct dram_para *para)
+{
+	/* TODO: non-LPDDR3, half DQ */
+
+	/* 8 banks, 32-bit (4 byte) data width */
+	return (1ULL << (para->cols + para->rows + 3)) * 4 * para->ranks;
+}
+
+#define SUN50I_H6_DX_WRITE_DELAYS				\
+	{{  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  4,  4,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 }}
+#define SUN50I_H6_DX_READ_DELAYS					\
+	{{  4,  4,  4,  4,  4,  4,  4,  4,  4,  0,  0,  0,  0,  0 },	\
+	 {  4,  4,  4,  4,  4,  4,  4,  4,  4,  0,  0,  0,  0,  0 },	\
+	 {  4,  4,  4,  4,  4,  4,  4,  4,  4,  0,  0,  0,  0,  0 },	\
+	 {  4,  4,  4,  4,  4,  4,  4,  4,  4,  0,  0,  0,  0,  0 }}
+
+unsigned long sunxi_dram_init(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct dram_para para = {
+		.clk = CONFIG_DRAM_CLK,
+		.type = SUNXI_DRAM_TYPE_LPDDR3,
+		.ranks = 2,
+		.cols = 11,
+		.rows = 14,
+		.dx_read_delays  = SUN50I_H6_DX_READ_DELAYS,
+		.dx_write_delays = SUN50I_H6_DX_WRITE_DELAYS,
+	};
+
+	unsigned long size;
+
+	/* RES_CAL_CTRL_REG in BSP U-boot*/
+	setbits_le32(0x7010310, BIT(8));
+	clrbits_le32(0x7010318, 0x3f);
+
+	mctl_auto_detect_dram_size(&para);
+
+	mctl_core_init(&para);
+
+	size = mctl_calc_size(&para);
+
+	clrsetbits_le32(&mctl_com->cr, 0xf0, (size >> (10 + 10 + 4)) & 0xf0);
+
+	mctl_set_master_priority();
+
+	return size;
+};