* Patches by Udi Finkelstein, 2 June 2003:
- Added support for custom keyboards, initialized by defining a
board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
- Added support for the RBC823 board.
- cpu/mpc8xx/lcd.c now automatically calculates the
Horizontal Pixel Count field.
* Fix alignment problem in BOOTP (dhcp_leasetime option)
[pointed out by Nicolas Lacressonnière, 2 Jun 2003]
* Patch by Mark Rakes, 14 May 2003:
add support for Intel e1000 gig cards.
* Patch by Nye Liu, 3 Jun 2003:
fix critical typo in MAMR definition (include/mpc8xx.h)
* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
* Patch by Klaus Heydeck, 2 Jun 2003
Minor changes for KUP4K configuration
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index f68f1e1..b924b9c 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -41,39 +41,41 @@
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#undef CONFIG_8xx_CONS_SMC2
#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600 /* console baudrate */
+#define CONFIG_BAUDRATE 115200 /* console baudrate */
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 1 second */
+#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */
#endif
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#define CONFIG_BOARD_TYPES 1 /* support board types */
-#if 0
-#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
-#endif
#undef CONFIG_BOOTARGS
+
-#define CONFIG_NFSBOOTCOMMAND \
- "dhcp ;"\
- "setenv bootargs root=/dev/nfs ro nfsroot=$(nfsip):$(rootpath) "\
- "ip=$(ipaddr):$(nfsip):$(gatewayip):"\
- "$(netmask):heydeck.eva:eth0:off; "\
- "bootm 100000"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+"slot_a_boot=setenv bootargs root=/dev/hda2 ip=off panic=1;\
+ diskboot 200000 0:1; bootm 200000\0" \
+"slot_b_boot=setenv bootargs root=/dev/hda2 ip=off panic=1;\
+ diskboot 200000 2:1; bootm 200000\0" \
+"nfs_boot=dhcp; run nfsargs addip; bootm 200000\0" \
+"panic_boot=echo No Bootdevice !!! reset\0" \
+"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(nfsip):$(rootpath)\0" \
+"ramargs=setenv bootargs root=/dev/ram rw\0" \
+"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(nfsip):$(gatewayip)\
+:$(netmask):$(hostname):$(netdev):off panic=1\0" \
+"netdev=eth0\0" \
+"load=tftp 200000 bootloader.bitmap;tftp 100000 u-boot.bin\0" \
+"update=protect off 1:0-8;era 1:0-8;cp.b 100000 40000000 $(filesize);\
+cp.b 200000 40040000 14000\0" \
+"nfsip=192.168.2.19\0"
-#define CONFIG_RAMBOOTCOMMAND \
- "diskboot 100000 0:1; "\
- "setenv bootargs root=/dev/hda2 panic=1 "\
- "ip=192.168.0.71:192.168.0.100:192.168.0.2:255.255.255.0; "\
- "bootm"
+#define CONFIG_BOOTCOMMAND \
+ "run slot_a_boot;run slot_b_boot;run nfs_boot;run panic_boot"
-#define CONFIG_BOOTCOMMAND \
- "run ramboot "\
- "run nfsboot"
#define CONFIG_MISC_INIT_R 1
@@ -124,12 +126,14 @@
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_LOAD_ADDR 0x200000 /* default load address */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CFG_CONSOLE_INFO_QUIET 1
+
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
@@ -250,7 +254,7 @@
*
* If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
*/
-#define CFG_PLPRCR ( (3-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
+#define CFG_PLPRCR ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
/*-----------------------------------------------------------------------
* SCCR - System Clock and reset Control Register 15-27
@@ -259,7 +263,7 @@
* power management and some other internal clocks
*/
#define SCCR_MASK SCCR_EBDF00
-#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 | \
+#define CFG_SCCR (SCCR_TBS | SCCR_EBDF01 | \
SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
SCCR_DFALCD00)
@@ -271,7 +275,7 @@
*/
/* KUP4K use both slots, SLOT_A as "primary". */
-#define CONFIG_PCMCIA_SLOT_A 1
+#define CONFIG_PCMCIA_SLOT_A 1
#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
@@ -428,12 +432,12 @@
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if NOT_USED_FOR_NOW
+
#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
#if 0
#define CONFIG_AUTOBOOT_PROMPT "Boote in %d Sekunden - stop mit \"2\"\n"
#endif
-#define CONFIG_AUTOBOOT_STOP_STR "2" /* easy to stop for now */
-#endif /* NOT_USED_FOR_NOW */
+#define CONFIG_AUTOBOOT_STOP_STR "." /* easy to stop for now */
+
#endif /* __CONFIG_H */