arm: dts: sync dts for i.MX6ULL
Sync kernel dts for i.MX6ULL from
commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
diff --git a/arch/arm/dts/imx6ull.dtsi b/arch/arm/dts/imx6ull.dtsi
index 4598f2f..22e4a30 100644
--- a/arch/arm/dts/imx6ull.dtsi
+++ b/arch/arm/dts/imx6ull.dtsi
@@ -1,1173 +1,81 @@
-/*
- * Copyright 2015-2016 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
-#include <dt-bindings/clock/imx6ul-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6ul.dtsi"
#include "imx6ull-pinfunc.h"
#include "imx6ull-pinfunc-snvs.h"
-#include "skeleton.dtsi"
-/ {
- aliases {
- can0 = &flexcan1;
- can1 = &flexcan2;
- ethernet0 = &fec1;
- ethernet1 = &fec2;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- i2c2 = &i2c3;
- i2c3 = &i2c4;
- mmc0 = &usdhc1;
- mmc1 = &usdhc2;
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- serial5 = &uart6;
- serial6 = &uart7;
- serial7 = &uart8;
- spi0 = &qspi;
- spi1 = &ecspi1;
- spi2 = &ecspi2;
- spi3 = &ecspi3;
- spi4 = &ecspi4;
- usbphy0 = &usbphy1;
- usbphy1 = &usbphy2;
- usb0 = &usbotg1;
- usb1 = &usbotg2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
- reg = <0>;
- clock-latency = <61036>; /* two CLK32 periods */
- operating-points = <
- /* kHz uV */
- 528000 1175000
- 99000 950000
- >;
- fsl,soc-operating-points = <
- /* KHz uV */
- 528000 1175000
- 99000 1175000
- >;
- clocks = <&clks IMX6UL_CLK_ARM>,
- <&clks IMX6UL_CLK_PLL2_BUS>,
- <&clks IMX6UL_CLK_PLL2_PFD2>,
- <&clks IMX6UL_CA7_SECONDARY_SEL>,
- <&clks IMX6UL_CLK_STEP>,
- <&clks IMX6UL_CLK_PLL1_SW>,
- <&clks IMX6UL_CLK_PLL1_SYS>,
- <&clks IMX6UL_PLL1_BYPASS>,
- <&clks IMX6UL_CLK_PLL1>,
- <&clks IMX6UL_PLL1_BYPASS_SRC>,
- <&clks IMX6UL_CLK_OSC>;
- clock-names = "arm", "pll2_bus", "pll2_pfd2_396m", "secondary_sel", "step",
- "pll1_sw", "pll1_sys", "pll1_bypass", "pll1", "pll1_bypass_src", "osc";
- };
- };
-
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a02000 0x100>;
- };
+/* Delete UART8 in AIPS-1 (i.MX6UL specific) */
+/delete-node/ &uart8;
+/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
+/delete-node/ &crypto;
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
+&cpu0 {
+ operating-points = <
+ /* kHz uV */
+ 900000 1275000
+ 792000 1225000
+ 528000 1175000
+ 396000 1025000
+ 198000 950000
+ >;
+ fsl,soc-operating-points = <
+ /* KHz uV */
+ 900000 1250000
+ 792000 1175000
+ 528000 1175000
+ 396000 1175000
+ 198000 1175000
+ >;
+};
- ckil: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "ckil";
- };
+&ocotp {
+ compatible = "fsl,imx6ull-ocotp", "syscon";
+};
- osc: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "osc";
- };
+&usdhc1 {
+ compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
- ipp_di0: clock@2 {
- compatible = "fixed-clock";
- reg = <2>;
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "ipp_di0";
- };
+&usdhc2 {
+ compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
- ipp_di1: clock@3 {
- compatible = "fixed-clock";
- reg = <3>;
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "ipp_di1";
- };
- };
-
+/ {
soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&gpc>;
- ranges;
-
- busfreq {
- compatible = "fsl,imx_busfreq";
- clocks = <&clks IMX6UL_CLK_PLL2_PFD2>, <&clks IMX6UL_CLK_PLL2_198M>,
- <&clks IMX6UL_CLK_PLL2_BUS>, <&clks IMX6UL_CLK_ARM>,
- <&clks IMX6UL_CLK_PLL3_USB_OTG>, <&clks IMX6UL_CLK_PERIPH>,
- <&clks IMX6UL_CLK_PERIPH_PRE>, <&clks IMX6UL_CLK_PERIPH_CLK2>,
- <&clks IMX6UL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6UL_CLK_OSC>,
- <&clks IMX6UL_CLK_AHB>, <&clks IMX6UL_CLK_AXI>,
- <&clks IMX6UL_CLK_PERIPH2>, <&clks IMX6UL_CLK_PERIPH2_PRE>,
- <&clks IMX6UL_CLK_PERIPH2_CLK2>, <&clks IMX6UL_CLK_PERIPH2_CLK2_SEL>,
- <&clks IMX6UL_CLK_STEP>, <&clks IMX6UL_CLK_MMDC_P0_FAST>, <&clks IMX6UL_PLL1_BYPASS_SRC>,
- <&clks IMX6UL_PLL1_BYPASS>, <&clks IMX6UL_CLK_PLL1_SYS>, <&clks IMX6UL_CLK_PLL1_SW>,
- <&clks IMX6UL_CLK_PLL1>;
- clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg",
- "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc",
- "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel",
- "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
- fsl,max_ddr_freq = <400000000>;
- };
-
- pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- ocrams: sram@00900000 {
- compatible = "fsl,lpm-sram";
- reg = <0x00900000 0x4000>;
- };
-
- ocrams_ddr: sram@00904000 {
- compatible = "fsl,ddr-lpm-sram";
- reg = <0x00904000 0x1000>;
- };
-
- ocram: sram@00905000 {
- compatible = "mmio-sram";
- reg = <0x00905000 0x1B000>;
- };
-
- dma_apbh: dma-apbh@01804000 {
- compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh";
- reg = <0x01804000 0x2000>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
- #dma-cells = <1>;
- dma-channels = <4>;
- clocks = <&clks IMX6UL_CLK_APBHDMA>;
- };
-
- gpmi: gpmi-nand@01806000{
- compatible = "fsl,imx6q-gpmi-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
- reg-names = "gpmi-nand", "bch";
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "bch";
- clocks = <&clks IMX6UL_CLK_GPMI_IO>,
- <&clks IMX6UL_CLK_GPMI_APB>,
- <&clks IMX6UL_CLK_GPMI_BCH>,
- <&clks IMX6UL_CLK_GPMI_BCH_APB>,
- <&clks IMX6UL_CLK_PER_BCH>;
- clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
- "gpmi_bch_apb", "per1_bch";
- dmas = <&dma_apbh 0>;
- dma-names = "rx-tx";
- status = "disabled";
- };
-
- aips1: aips-bus@02000000 {
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02000000 0x100000>;
- ranges;
-
- spba-bus@02000000 {
- compatible = "fsl,spba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02000000 0x40000>;
- ranges;
-
- spdif: spdif@02004000 {
- compatible = "fsl,imx6ul-spdif", "fsl,imx35-spdif";
- reg = <0x02004000 0x4000>;
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&sdma 41 18 0>,
- <&sdma 42 18 0>;
- dma-names = "rx", "tx";
- clocks = <&clks IMX6UL_CLK_SPDIF_GCLK>,
- <&clks IMX6UL_CLK_OSC>,
- <&clks IMX6UL_CLK_SPDIF>,
- <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_IPG>,
- <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_SPBA>;
- clock-names = "core", "rxtx0",
- "rxtx1", "rxtx2",
- "rxtx3", "rxtx4",
- "rxtx5", "rxtx6",
- "rxtx7", "dma";
- status = "disabled";
- };
-
- ecspi1: ecspi@02008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
- reg = <0x02008000 0x4000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ECSPI1>,
- <&clks IMX6UL_CLK_ECSPI1>;
- clock-names = "ipg", "per";
- dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- ecspi2: ecspi@0200c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
- reg = <0x0200c000 0x4000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ECSPI2>,
- <&clks IMX6UL_CLK_ECSPI2>;
- clock-names = "ipg", "per";
- dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- ecspi3: ecspi@02010000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
- reg = <0x02010000 0x4000>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ECSPI3>,
- <&clks IMX6UL_CLK_ECSPI3>;
- clock-names = "ipg", "per";
- dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- ecspi4: ecspi@02014000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
- reg = <0x02014000 0x4000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ECSPI4>,
- <&clks IMX6UL_CLK_ECSPI4>;
- clock-names = "ipg", "per";
- dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart7: serial@02018000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x02018000 0x4000>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART7_IPG>,
- <&clks IMX6UL_CLK_UART7_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 43 4 0>, <&sdma 44 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart1: serial@02020000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x02020000 0x4000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART1_IPG>,
- <&clks IMX6UL_CLK_UART1_SERIAL>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- esai: esai@02024000 {
- compatible = "fsl,imx6ull-esai";
- reg = <0x02024000 0x4000>;
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ESAI_IPG>,
- <&clks IMX6UL_CLK_ESAI_MEM>,
- <&clks IMX6UL_CLK_ESAI_EXTAL>,
- <&clks IMX6UL_CLK_ESAI_IPG>,
- <&clks IMX6UL_CLK_SPBA>;
- clock-names = "core", "mem", "extal",
- "fsys", "dma";
- dmas = <&sdma 0 21 0>, <&sdma 47 21 0>;
- dma-names = "rx", "tx";
- dma-source = <&gpr 0 14 0 15>;
- status = "disabled";
- };
-
- sai1: sai@02028000 {
- compatible = "fsl,imx6ul-sai",
- "fsl,imx6sx-sai";
- reg = <0x02028000 0x4000>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
- <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_SAI1>,
- <&clks 0>, <&clks 0>;
- clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dma-names = "rx", "tx";
- dmas = <&sdma 35 24 0>, <&sdma 36 24 0>;
- status = "disabled";
- };
-
- sai2: sai@0202c000 {
- compatible = "fsl,imx6ul-sai",
- "fsl,imx6sx-sai";
- reg = <0x0202c000 0x4000>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
- <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_SAI2>,
- <&clks 0>, <&clks 0>;
- clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dma-names = "rx", "tx";
- dmas = <&sdma 37 24 0>, <&sdma 38 24 0>;
- status = "disabled";
- };
-
- sai3: sai@02030000 {
- compatible = "fsl,imx6ul-sai",
- "fsl,imx6sx-sai";
- reg = <0x02030000 0x4000>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
- <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_SAI3>,
- <&clks 0>, <&clks 0>;
- clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dma-names = "rx", "tx";
- dmas = <&sdma 39 24 0>, <&sdma 40 24 0>;
- status = "disabled";
- };
-
- asrc: asrc@02034000 {
- compatible = "fsl,imx53-asrc";
- reg = <0x02034000 0x4000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
- <&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>,
- <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
- <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
- <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
- <&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>,
- <&clks IMX6UL_CLK_SPBA>;
- clock-names = "mem", "ipg", "asrck_0",
- "asrck_1", "asrck_2", "asrck_3", "asrck_4",
- "asrck_5", "asrck_6", "asrck_7", "asrck_8",
- "asrck_9", "asrck_a", "asrck_b", "asrck_c",
- "asrck_d", "asrck_e", "asrck_f", "dma";
- dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
- <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
- dma-names = "rxa", "rxb", "rxc",
- "txa", "txb", "txc";
- fsl,asrc-rate = <48000>;
- fsl,asrc-width = <16>;
- status = "okay";
- };
- };
-
- tsc: tsc@02040000 {
- compatible = "fsl,imx6ul-tsc";
- reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_IPG>,
- <&clks IMX6UL_CLK_ADC2>;
- clock-names = "tsc", "adc";
- status = "disabled";
- };
-
- pwm1: pwm@02080000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x02080000 0x4000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_PWM1>,
- <&clks IMX6UL_CLK_PWM1>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm2: pwm@02084000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x02084000 0x4000>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm3: pwm@02088000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x02088000 0x4000>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_PWM3>,
- <&clks IMX6UL_CLK_PWM3>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm4: pwm@0208c000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x0208c000 0x4000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- flexcan1: can@02090000 {
- compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
- reg = <0x02090000 0x4000>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
- <&clks IMX6UL_CLK_CAN1_SERIAL>;
- clock-names = "ipg", "per";
- stop-mode = <&gpr 0x10 1 0x10 17>;
- status = "disabled";
- };
-
- flexcan2: can@02094000 {
- compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
- reg = <0x02094000 0x4000>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
- <&clks IMX6UL_CLK_CAN2_SERIAL>;
- clock-names = "ipg", "per";
- stop-mode = <&gpr 0x10 2 0x10 18>;
- status = "disabled";
- };
-
- gpt1: gpt@02098000 {
- compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt";
- reg = <0x02098000 0x4000>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
- <&clks IMX6UL_CLK_GPT1_SERIAL>;
- clock-names = "ipg", "per";
- };
-
- gpio1: gpio@0209c000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x0209c000 0x4000>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@020a0000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x020a0000 0x4000>;
- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@020a4000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x020a4000 0x4000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@020a8000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x020a8000 0x4000>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio5: gpio@020ac000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x020ac000 0x4000>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- snvslp: snvs@020b0000 {
- compatible = "fsl,imx6ul-snvs";
- reg = <0x020b0000 0x4000>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- fec2: ethernet@020b4000 {
- compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
- reg = <0x020b4000 0x4000>;
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ENET>,
- <&clks IMX6UL_CLK_ENET_AHB>,
- <&clks IMX6UL_CLK_ENET_PTP>,
- <&clks IMX6UL_CLK_ENET2_REF_125M>,
- <&clks IMX6UL_CLK_ENET2_REF_125M>;
- clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
- stop-mode = <&gpr 0x10 4>;
- fsl,num-tx-queues=<1>;
- fsl,num-rx-queues=<1>;
- fsl,magic-packet;
- fsl,wakeup_irq = <0>;
- status = "disabled";
- };
-
- kpp: kpp@020b8000 {
- compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
- reg = <0x020b8000 0x4000>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>;
- status = "disabled";
- };
-
- wdog1: wdog@020bc000 {
- compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
- reg = <0x020bc000 0x4000>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_WDOG1>;
- };
-
- wdog2: wdog@020c0000 {
- compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
- reg = <0x020c0000 0x4000>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_WDOG2>;
- status = "disabled";
- };
-
- clks: ccm@020c4000 {
- compatible = "fsl,imx6ul-ccm";
- reg = <0x020c4000 0x4000>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- #clock-cells = <1>;
- clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
- clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
- };
-
- anatop: anatop@020c8000 {
- compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
- "syscon", "simple-bus";
- reg = <0x020c8000 0x1000>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-
- reg_3p0: regulator-3p0@120 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vdd3p0";
- regulator-min-microvolt = <2625000>;
- regulator-max-microvolt = <3400000>;
- anatop-reg-offset = <0x120>;
- anatop-vol-bit-shift = <8>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <0>;
- anatop-min-voltage = <2625000>;
- anatop-max-voltage = <3400000>;
- anatop-enable-bit = <0>;
- };
-
- reg_arm: regulator-vddcore@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "cpu";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <0>;
- anatop-vol-bit-width = <5>;
- anatop-delay-reg-offset = <0x170>;
- anatop-delay-bit-shift = <24>;
- anatop-delay-bit-width = <2>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
-
- reg_soc: regulator-vddsoc@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vddsoc";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <18>;
- anatop-vol-bit-width = <5>;
- anatop-delay-reg-offset = <0x170>;
- anatop-delay-bit-shift = <28>;
- anatop-delay-bit-width = <2>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
- };
-
- usbphy1: usbphy@020c9000 {
- compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
- reg = <0x020c9000 0x1000>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USBPHY1>;
- phy-3p0-supply = <®_3p0>;
- fsl,anatop = <&anatop>;
- };
-
- usbphy2: usbphy@020ca000 {
- compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
- reg = <0x020ca000 0x1000>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USBPHY2>;
- phy-3p0-supply = <®_3p0>;
- fsl,anatop = <&anatop>;
- };
-
- tempmon: tempmon {
- compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
- clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
- };
-
- snvs: snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
- reg = <0x020cc000 0x4000>;
-
- snvs_rtc: snvs-rtc-lp {
- compatible = "fsl,sec-v4.0-mon-rtc-lp";
- regmap = <&snvs>;
- offset = <0x34>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- snvs_poweroff: snvs-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&snvs>;
- offset = <0x38>;
- mask = <0x61>;
- };
-
- snvs_pwrkey: snvs-powerkey {
- compatible = "fsl,sec-v4.0-pwrkey";
- regmap = <&snvs>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- linux,keycode = <KEY_POWER>;
- wakeup;
- };
- };
-
- epit1: epit@020d0000 {
- reg = <0x020d0000 0x4000>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- epit2: epit@020d4000 {
- reg = <0x020d4000 0x4000>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- src: src@020d8000 {
- compatible = "fsl,imx6ul-src", "fsl,imx51-src";
- reg = <0x020d8000 0x4000>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- #reset-cells = <1>;
- };
-
- gpc: gpc@020dc000 {
- compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
- reg = <0x020dc000 0x4000>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&intc>;
- fsl,mf-mix-wakeup-irq = <0xfc00000 0x7d00 0x0 0x1400640>;
- };
-
- iomuxc: iomuxc@020e0000 {
- compatible = "fsl,imx6ul-iomuxc";
- reg = <0x020e0000 0x4000>;
- };
-
- gpr: iomuxc-gpr@020e4000 {
- compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
- reg = <0x020e4000 0x4000>;
- };
-
- mqs: mqs {
- compatible = "fsl,imx6sx-mqs";
- gpr = <&gpr>;
- status = "disabled";
- };
-
- gpt2: gpt@020e8000 {
- compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt";
- reg = <0x020e8000 0x4000>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- };
-
- sdma: sdma@020ec000 {
- compatible = "fsl,imx6ul-sdma", "fsl,imx35-sdma";
- reg = <0x020ec000 0x4000>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SDMA>,
- <&clks IMX6UL_CLK_SDMA>;
- clock-names = "ipg", "ahb";
- #dma-cells = <3>;
- iram = <&ocram>;
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
- };
-
- pwm5: pwm@020f0000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x020f0000 0x4000>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm6: pwm@020f4000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x020f4000 0x4000>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm7: pwm@020f8000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x020f8000 0x4000>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm8: pwm@020fc000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x020fc000 0x4000>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
- };
-
- aips2: aips-bus@02100000 {
+ aips3: aips-bus@2200000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x02100000 0x100000>;
- ranges;
-
- usbotg1: usb@02184000 {
- compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
- reg = <0x02184000 0x200>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USBOH3>;
- fsl,usbphy = <&usbphy1>;
- fsl,usbmisc = <&usbmisc 0>;
- fsl,anatop = <&anatop>;
- ahb-burst-config = <0x0>;
- tx-burst-size-dword = <0x10>;
- rx-burst-size-dword = <0x10>;
- status = "disabled";
- };
-
- usbotg2: usb@02184200 {
- compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
- reg = <0x02184200 0x200>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USBOH3>;
- fsl,usbphy = <&usbphy2>;
- fsl,usbmisc = <&usbmisc 1>;
- ahb-burst-config = <0x0>;
- tx-burst-size-dword = <0x10>;
- rx-burst-size-dword = <0x10>;
- status = "disabled";
- };
-
- usbmisc: usbmisc@02184800 {
- #index-cells = <1>;
- compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
- reg = <0x02184800 0x200>;
- };
-
- fec1: ethernet@02188000 {
- compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
- reg = <0x02188000 0x4000>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ENET>,
- <&clks IMX6UL_CLK_ENET_AHB>,
- <&clks IMX6UL_CLK_ENET_PTP>,
- <&clks IMX6UL_CLK_ENET_REF>,
- <&clks IMX6UL_CLK_ENET_REF>;
- clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
- stop-mode = <&gpr 0x10 3>;
- fsl,num-tx-queues=<1>;
- fsl,num-rx-queues=<1>;
- fsl,magic-packet;
- fsl,wakeup_irq = <0>;
- status = "disabled";
- };
-
- usdhc1: usdhc@02190000 {
- compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
- reg = <0x02190000 0x4000>;
- interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USDHC1>,
- <&clks IMX6UL_CLK_USDHC1>,
- <&clks IMX6UL_CLK_USDHC1>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- fsl,tuning-step= <2>;
- status = "disabled";
- };
-
- usdhc2: usdhc@02194000 {
- compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
- reg = <0x02194000 0x4000>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USDHC2>,
- <&clks IMX6UL_CLK_USDHC2>,
- <&clks IMX6UL_CLK_USDHC2>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- fsl,tuning-step= <2>;
- status = "disabled";
- };
-
- adc1: adc@02198000 {
- compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
- reg = <0x02198000 0x4000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ADC1>;
- num-channels = <2>;
- clock-names = "adc";
- status = "disabled";
- };
-
- i2c1: i2c@021a0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
- reg = <0x021a0000 0x4000>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_I2C1>;
- status = "disabled";
- };
-
- i2c2: i2c@021a4000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
- reg = <0x021a4000 0x4000>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_I2C2>;
- status = "disabled";
- };
-
- i2c3: i2c@021a8000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
- reg = <0x021a8000 0x4000>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_I2C3>;
- status = "disabled";
- };
-
- romcp@021ac000 {
- compatible = "fsl,imx6ul-romcp", "syscon";
- reg = <0x021ac000 0x4000>;
- };
-
- mmdc: mmdc@021b0000 {
- compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
- reg = <0x021b0000 0x4000>;
- };
-
- weim: weim@021b8000 {
- compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
- reg = <0x021b8000 0x4000>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>;
- };
-
- ocotp: ocotp-ctrl@021bc000 {
- compatible = "fsl,imx6ull-ocotp", "syscon";
- reg = <0x021bc000 0x4000>;
- clocks = <&clks IMX6UL_CLK_OCOTP>;
- };
-
- csu: csu@021c0000 {
- compatible = "fsl,imx6ul-csu";
- reg = <0x021c0000 0x4000>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- csi: csi@021c4000 {
- compatible = "fsl,imx6ul-csi", "fsl,imx6s-csi";
- reg = <0x021c4000 0x4000>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_CSI>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "disp-axi", "csi_mclk", "disp_dcic";
- status = "disabled";
- };
-
- lcdif: lcdif@021c8000 {
- compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
- reg = <0x021c8000 0x4000>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
- <&clks IMX6UL_CLK_LCDIF_APB>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "pix", "axi", "disp_axi";
- status = "disabled";
- };
-
- pxp: pxp@021cc000 {
- compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma";
- reg = <0x021cc000 0x4000>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_PXP>;
- clock-names = "pxp_ipg", "pxp_axi";
- status = "disabled";
- };
-
- qspi: qspi@021e0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ull-qspi", "fsl,imx6ul-qspi";
- reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
- reg-names = "QuadSPI", "QuadSPI-memory";
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_QSPI>,
- <&clks IMX6UL_CLK_QSPI>;
- clock-names = "qspi_en", "qspi";
- status = "disabled";
- };
-
- wdog3: wdog@021e4000 {
- compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
- reg = <0x021e4000 0x4000>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_WDOG3>;
- status = "disabled";
- };
-
- uart2: serial@021e8000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021e8000 0x4000>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART2_IPG>,
- <&clks IMX6UL_CLK_UART2_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart3: serial@021ec000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021ec000 0x4000>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART3_IPG>,
- <&clks IMX6UL_CLK_UART3_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart4: serial@021f0000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021f0000 0x4000>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART4_IPG>,
- <&clks IMX6UL_CLK_UART4_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart5: serial@021f4000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021f4000 0x4000>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART5_IPG>,
- <&clks IMX6UL_CLK_UART5_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c4: i2c@021f8000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
- reg = <0x021f8000 0x4000>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_I2C4>;
- status = "disabled";
- };
-
- uart6: serial@021fc000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021fc000 0x4000>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART6_IPG>,
- <&clks IMX6UL_CLK_UART6_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
- };
-
- aips3: aips-bus@02200000 {
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
reg = <0x02200000 0x100000>;
ranges;
- dcp: dcp@02280000 {
+ dcp: crypto@2280000 {
+ compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp";
reg = <0x02280000 0x4000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- /*clocks = <&clks IMX6UL_CLK_DCP>;*/
+ clocks = <&clks IMX6ULL_CLK_DCP_CLK>;
clock-names = "dcp";
- status = "disabled";
};
- rngb: rngb@02284000 {
- reg = <0x02284000 0x4000>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ iomuxc_snvs: iomuxc-snvs@2290000 {
+ compatible = "fsl,imx6ull-iomuxc-snvs";
+ reg = <0x02290000 0x4000>;
};
- uart8: serial@02288000 {
+ uart8: serial@2288000 {
compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
+ "fsl,imx6q-uart";
reg = <0x02288000 0x4000>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_UART8_IPG>,
<&clks IMX6UL_CLK_UART8_SERIAL>;
clock-names = "ipg", "per";
- dmas = <&sdma 45 4 0>, <&sdma 46 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- epdc: epdc@0228c000 {
- compatible = "fsl,imx7d-epdc";
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0228c000 0x4000>;
- clocks = <&clks IMX6UL_CLK_EPDC_ACLK>,
- <&clks IMX6UL_CLK_EPDC_PIX>;
- clock-names = "epdc_axi", "epdc_pix";
- /* Need to fix epdc-ram */
- /* epdc-ram = <&gpr 0x4 30>; */
status = "disabled";
};
-
- iomuxc_snvs: iomuxc-snvs@02290000 {
- compatible = "fsl,imx6ull-iomuxc-snvs";
- reg = <0x02290000 0x10000>;
- };
-
- snvs_gpr: snvs-gpr@0x02294000 {
- compatible = "fsl, imx6ull-snvs-gpr";
- reg = <0x02294000 0x10000>;
- };
};
};
};