x86: Add an option to control the position of SPL
For Apollo Lake SPL is run from CAR (cache-as-RAM) which is in a different
location from where SPL must be placed in ROM. In other words, although
SPL runs before SDRAM is set up, it is not execute-in-place (XIP).
Add a Kconfig option for the ROM position.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9d7ff3c..1d08cb2 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -904,4 +904,9 @@
depends on HAVE_SYS_TEXT_BASE
default SYS_TEXT_BASE
+config X86_OFFSET_SPL
+ hex "Offset of SPL in ROM image"
+ depends on SPL && X86
+ default SPL_TEXT_BASE
+
endmenu
diff --git a/arch/x86/dts/u-boot.dtsi b/arch/x86/dts/u-boot.dtsi
index d84c648..fad3e7c 100644
--- a/arch/x86/dts/u-boot.dtsi
+++ b/arch/x86/dts/u-boot.dtsi
@@ -45,7 +45,7 @@
};
#endif
u-boot-spl {
- offset = <CONFIG_SPL_TEXT_BASE>;
+ offset = <CONFIG_X86_OFFSET_SPL>;
};
u-boot-spl-dtb {
};
@@ -54,7 +54,7 @@
};
#elif defined(CONFIG_SPL)
u-boot-spl-with-ucode-ptr {
- offset = <CONFIG_SPL_TEXT_BASE>;
+ offset = <CONFIG_X86_OFFSET_SPL>;
};
u-boot-dtb-with-ucode2 {
type = "u-boot-dtb-with-ucode";