board: arm: Add support for Broadcom BCM7260
Add support for loading U-Boot on the Broadcom 7260 SoC. This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader, and U-Boot is acting as the third stage bootloader, loaded
as an ELF program by BOLT.
Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
diff --git a/arch/arm/mach-bcmstb/Kconfig b/arch/arm/mach-bcmstb/Kconfig
index 6c7952f..0a56c3c 100644
--- a/arch/arm/mach-bcmstb/Kconfig
+++ b/arch/arm/mach-bcmstb/Kconfig
@@ -7,8 +7,14 @@
Support for the Broadcom 7445 SoC. This port assumes BOLT
is acting as the second stage bootloader, and U-Boot is
acting as the third stage bootloader (TSBL), loaded by BOLT.
- This port may work on other BCM7xxx boards with
- configuration changes.
+
+config TARGET_BCM7260
+ bool "Broadcom 7260 TSBL"
+ depends on ARCH_BCMSTB
+ help
+ Support for the Broadcom 7260 SoC. This port assumes BOLT
+ is acting as the second stage bootloader, and U-Boot is
+ acting as the third stage bootloader (TSBL), loaded by BOLT.
config SYS_CPU
default "armv7"
@@ -23,7 +29,8 @@
default "bcmstb"
config SYS_CONFIG_NAME
- default "bcm7445"
+ default "bcm7445" if TARGET_BCM7445
+ default "bcm7260" if TARGET_BCM7260
config SYS_FDT_SAVE_ADDRESS
hex "Address to which the prior stage provided DTB will be copied"