arm: Rename STM32MP15x
CONFIG options must not use lower-case letter. Convert this and related
ones to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9542303..7bb60c3 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1364,7 +1364,7 @@
dtb-$(CONFIG_STM32MP13X) += \
stm32mp135f-dk.dtb
-dtb-$(CONFIG_STM32MP15x) += \
+dtb-$(CONFIG_STM32MP15X) += \
stm32mp157a-dk1.dtb \
stm32mp157a-dk1-scmi.dtb \
stm32mp157a-icore-stm32mp1-ctouch2.dtb \
diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi
index 573dd4d..fe56f05 100644
--- a/arch/arm/dts/stm32mp15-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15-u-boot.dtsi
@@ -206,7 +206,7 @@
resets = <&rcc UART8_R>;
};
-#if defined(CONFIG_STM32MP15x_STM32IMAGE)
+#if defined(CONFIG_STM32MP15X_STM32IMAGE)
&binman {
u-boot-stm32 {
filename = "u-boot.stm32";
diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
index 2623ceb..a163582 100644
--- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
@@ -22,13 +22,13 @@
st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
-#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
+#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
config {
u-boot,mmc-env-partition = "ssbl";
};
#endif
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
/* only needed for boot with TF-A, witout FIP support */
firmware {
optee {
diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
index b828827..ef91088 100644
--- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -20,13 +20,13 @@
st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
-#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
+#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
config {
u-boot,mmc-env-partition = "ssbl";
};
#endif
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
/* only needed for boot with TF-A, witout FIP support */
firmware {
optee {
diff --git a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
index eb283ca..139940b 100644
--- a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
@@ -28,7 +28,7 @@
#address-cells = <1>;
#size-cells = <1>;
-#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
+#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
partition@0 {
label = "fsbl1";
reg = <0x00000000 0x00040000>;
@@ -82,7 +82,7 @@
#address-cells = <1>;
#size-cells = <1>;
-#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
+#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
partition@0 {
label = "fsbl";
reg = <0x00000000 0x00200000>;