Altera Stratix II support
Adds Support for Altera's Stratix II.
Within your board specific init file you will have to call
1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
Altera_desc* contines (for example):
{
Altera_StratixII, /* part type */
passive_serial, /* interface type */
1, /* bytes of data part can accept */
(void *)(&funcs), /* interface function table */
0L, /* base interface address */
0 /* implementation specific cookie */
}
funcs is the interface. It is of type altera_board_specific_func.
It looks like this:
altera_board_specific_func func = {
pre_fn,
config_fn,
status_fn,
done_fn,
clk_fn,
data_fn,
abort_fn,
post_fn,
};
you will have to implement these functions, which is usually bit
banging some gpio.
Signed-off-by: Eran Liberty <liberty@extricom.com>
diff --git a/common/Makefile b/common/Makefile
index c71b228..9678799 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -102,6 +102,7 @@
COBJS-y += command.o
COBJS-y += console.o
COBJS-y += cyclon2.o
+COBJS-y += stratixII.o
COBJS-y += devices.o
COBJS-y += dlmalloc.o
COBJS-y += docecc.o
diff --git a/common/altera.c b/common/altera.c
index 0df7bae..a2b5967 100644
--- a/common/altera.c
+++ b/common/altera.c
@@ -30,6 +30,7 @@
*/
#include <common.h>
#include <ACEX1K.h>
+#include <stratixII.h>
/* Define FPGA_DEBUG to get debug printf's */
/* #define FPGA_DEBUG */
@@ -43,7 +44,7 @@
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA)
/* Local Static Functions */
-static int altera_validate (Altera_desc * desc, char *fn);
+static int altera_validate (Altera_desc * desc, const char *fn);
/* ------------------------------------------------------------------------- */
int altera_load( Altera_desc *desc, void *buf, size_t bsize )
@@ -60,7 +61,7 @@
PRINTF ("%s: Launching the ACEX1K Loader...\n",
__FUNCTION__);
ret_val = ACEX1K_load (desc, buf, bsize);
-#elif defined CONFIG_FPGA_CYCLON2
+#elif defined(CONFIG_FPGA_CYCLON2)
PRINTF ("%s: Launching the CYCLON II Loader...\n",
__FUNCTION__);
ret_val = CYC2_load (desc, buf, bsize);
@@ -70,6 +71,13 @@
#endif
break;
+#if defined(CONFIG_FPGA_STRATIX_II)
+ case Altera_StratixII:
+ PRINTF ("%s: Launching the Stratix II Loader...\n",
+ __FUNCTION__);
+ ret_val = StratixII_load (desc, buf, bsize);
+ break;
+#endif
default:
printf ("%s: Unsupported family type, %d\n",
__FUNCTION__, desc->family);
@@ -98,6 +106,13 @@
#endif
break;
+#if defined(CONFIG_FPGA_STRATIX_II)
+ case Altera_StratixII:
+ PRINTF ("%s: Launching the Stratix II Reader...\n",
+ __FUNCTION__);
+ ret_val = StratixII_dump (desc, buf, bsize);
+ break;
+#endif
default:
printf ("%s: Unsupported family type, %d\n",
__FUNCTION__, desc->family);
@@ -117,10 +132,13 @@
case Altera_ACEX1K:
printf ("ACEX1K\n");
break;
- /* Add new family types here */
case Altera_CYC2:
printf ("CYCLON II\n");
break;
+ case Altera_StratixII:
+ printf ("Stratix II\n");
+ break;
+ /* Add new family types here */
default:
printf ("Unknown family type, %d\n", desc->family);
}
@@ -142,6 +160,13 @@
case altera_jtag_mode: /* Not used */
printf ("JTAG Mode\n");
break;
+ case fast_passive_parallel:
+ printf ("Fast Passive Parallel (FPP)\n");
+ break;
+ case fast_passive_parallel_security:
+ printf
+ ("Fast Passive Parallel with Security (FPPS) \n");
+ break;
/* Add new interface types here */
default:
printf ("Unsupported interface type, %d\n", desc->iface);
@@ -166,6 +191,11 @@
__FUNCTION__);
#endif
break;
+#if defined(CONFIG_FPGA_STRATIX_II)
+ case Altera_StratixII:
+ StratixII_info (desc);
+ break;
+#endif
/* Add new family types here */
default:
/* we don't need a message here - we give one up above */
@@ -199,6 +229,11 @@
__FUNCTION__);
#endif
break;
+#if defined(CONFIG_FPGA_STRATIX_II)
+ case Altera_StratixII:
+ ret_val = StratixII_reloc (desc, reloc_offset);
+ break;
+#endif
case Altera_CYC2:
#if defined(CONFIG_FPGA_CYCLON2)
ret_val = CYC2_reloc (desc, reloc_offset);
@@ -219,7 +254,7 @@
/* ------------------------------------------------------------------------- */
-static int altera_validate (Altera_desc * desc, char *fn)
+static int altera_validate (Altera_desc * desc, const char *fn)
{
int ret_val = FALSE;
diff --git a/common/fpga.c b/common/fpga.c
index d8b6ae3..d16a92d 100644
--- a/common/fpga.c
+++ b/common/fpga.c
@@ -199,10 +199,6 @@
memset( desc_table, 0, sizeof(desc_table));
PRINTF( "%s: CONFIG_FPGA = 0x%x\n", __FUNCTION__, CONFIG_FPGA );
-#if 0
- PRINTF( "%s: CFG_FPGA_XILINX = 0x%x\n", __FUNCTION__, CFG_FPGA_XILINX );
- PRINTF( "%s: CFG_FPGA_ALTERA = 0x%x\n", __FUNCTION__, CFG_FPGA_ALTERA );
-#endif
}
/* fpga_count
diff --git a/common/stratixII.c b/common/stratixII.c
new file mode 100644
index 0000000..85c461c
--- /dev/null
+++ b/common/stratixII.c
@@ -0,0 +1,235 @@
+/*
+ * (C) Copyright 2007
+ * Eran Liberty, Extricom , eran.liberty@gmail.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h> /* core U-Boot definitions */
+#include <altera.h>
+
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_STRATIX_II)
+
+int StratixII_ps_fpp_load (Altera_desc * desc, void *buf, size_t bsize,
+ int isSerial, int isSecure);
+int StratixII_ps_fpp_dump (Altera_desc * desc, void *buf, size_t bsize);
+
+/****************************************************************/
+/* Stratix II Generic Implementation */
+int StratixII_load (Altera_desc * desc, void *buf, size_t bsize)
+{
+ int ret_val = FPGA_FAIL;
+
+ switch (desc->iface) {
+ case passive_serial:
+ ret_val = StratixII_ps_fpp_load (desc, buf, bsize, 1, 0);
+ break;
+ case fast_passive_parallel:
+ ret_val = StratixII_ps_fpp_load (desc, buf, bsize, 0, 0);
+ break;
+ case fast_passive_parallel_security:
+ ret_val = StratixII_ps_fpp_load (desc, buf, bsize, 0, 1);
+ break;
+
+ /* Add new interface types here */
+ default:
+ printf ("%s: Unsupported interface type, %d\n", __FUNCTION__,
+ desc->iface);
+ }
+ return ret_val;
+}
+
+int StratixII_dump (Altera_desc * desc, void *buf, size_t bsize)
+{
+ int ret_val = FPGA_FAIL;
+
+ switch (desc->iface) {
+ case passive_serial:
+ case fast_passive_parallel:
+ case fast_passive_parallel_security:
+ ret_val = StratixII_ps_fpp_dump (desc, buf, bsize);
+ break;
+ /* Add new interface types here */
+ default:
+ printf ("%s: Unsupported interface type, %d\n", __FUNCTION__,
+ desc->iface);
+ }
+ return ret_val;
+}
+
+int StratixII_info (Altera_desc * desc)
+{
+ return FPGA_SUCCESS;
+}
+
+int StratixII_reloc (Altera_desc * desc, ulong reloc_offset)
+{
+ int i;
+ uint32_t dest = (uint32_t) desc & 0xff000000;
+
+ /* we assume a relocated code and non relocated code has different upper 8 bits */
+ if (dest != ((uint32_t) desc->iface_fns & 0xff000000)) {
+ desc->iface_fns =
+ (void *)((uint32_t) (desc->iface_fns) + reloc_offset);
+ }
+ for (i = 0; i < sizeof (altera_board_specific_func) / sizeof (void *);
+ i++) {
+ if (dest !=
+ ((uint32_t) (((void **)(desc->iface_fns))[i]) & 0xff000000))
+ {
+ ((void **)(desc->iface_fns))[i] =
+ (void
+ *)(((uint32_t) (((void **)(desc->iface_fns))[i])) +
+ reloc_offset);
+ }
+ }
+ return FPGA_SUCCESS;
+}
+
+int StratixII_ps_fpp_dump (Altera_desc * desc, void *buf, size_t bsize)
+{
+ printf ("Stratix II Fast Passive Parallel dump is not implemented\n");
+ return FPGA_FAIL;
+}
+
+int StratixII_ps_fpp_load (Altera_desc * desc, void *buf, size_t bsize,
+ int isSerial, int isSecure)
+{
+ altera_board_specific_func *fns;
+ int cookie;
+ int ret_val = FPGA_FAIL;
+ int bytecount;
+ char *buff = buf;
+ int i;
+
+ if (!desc) {
+ printf ("%s(%d) Altera_desc missing\n", __FUNCTION__, __LINE__);
+ return FPGA_FAIL;
+ }
+ if (!buff) {
+ printf ("%s(%d) buffer is missing\n", __FUNCTION__, __LINE__);
+ return FPGA_FAIL;
+ }
+ if (!bsize) {
+ printf ("%s(%d) size is zero\n", __FUNCTION__, __LINE__);
+ return FPGA_FAIL;
+ }
+ if (!desc->iface_fns) {
+ printf
+ ("%s(%d) Altera_desc function interface table is missing\n",
+ __FUNCTION__, __LINE__);
+ return FPGA_FAIL;
+ }
+ fns = (altera_board_specific_func *) (desc->iface_fns);
+ cookie = desc->cookie;
+
+ if (!
+ (fns->config && fns->status && fns->done && fns->data
+ && fns->abort)) {
+ printf
+ ("%s(%d) Missing some function in the function interface table\n",
+ __FUNCTION__, __LINE__);
+ return FPGA_FAIL;
+ }
+
+ /* 1. give board specific a chance to do anything before we start */
+ if (fns->pre) {
+ if ((ret_val = fns->pre (cookie)) < 0) {
+ return ret_val;
+ }
+ }
+
+ /* from this point on we must fail gracfully by calling lower layer abort */
+
+ /* 2. Strat burn cycle by deasserting config for t_CFG and waiting t_CF2CK after reaserted */
+ fns->config (0, 1, cookie);
+ udelay (5); /* nCONFIG low pulse width 2usec */
+ fns->config (1, 1, cookie);
+ udelay (100); /* nCONFIG high to first rising edge on DCLK */
+
+ /* 3. Start the Data cycle with clk deasserted */
+ bytecount = 0;
+ fns->clk (0, 1, cookie);
+
+ printf ("loading to fpga ");
+ while (bytecount < bsize) {
+ /* 3.1 check stratix has not signaled us an error */
+ if (fns->status (cookie) != 1) {
+ printf
+ ("\n%s(%d) Stratix failed (byte transfered till failure 0x%x)\n",
+ __FUNCTION__, __LINE__, bytecount);
+ fns->abort (cookie);
+ return FPGA_FAIL;
+ }
+ if (isSerial) {
+ int i;
+ uint8_t data = buff[bytecount++];
+ for (i = 0; i < 8; i++) {
+ /* 3.2(ps) put data on the bus */
+ fns->data ((data >> i) & 1, 1, cookie);
+
+ /* 3.3(ps) clock once */
+ fns->clk (1, 1, cookie);
+ fns->clk (0, 1, cookie);
+ }
+ } else {
+ /* 3.2(fpp) put data on the bus */
+ fns->data (buff[bytecount++], 1, cookie);
+
+ /* 3.3(fpp) clock once */
+ fns->clk (1, 1, cookie);
+ fns->clk (0, 1, cookie);
+
+ /* 3.4(fpp) for secure cycle push 3 more clocks */
+ for (i = 0; isSecure && i < 3; i++) {
+ fns->clk (1, 1, cookie);
+ fns->clk (0, 1, cookie);
+ }
+ }
+
+ /* 3.5 while clk is deasserted it is safe to print some progress indication */
+ if ((bytecount % (bsize / 100)) == 0) {
+ printf ("\b\b\b%02d\%", bytecount * 100 / bsize);
+ }
+ }
+
+ /* 4. Set one last clock and check conf done signal */
+ fns->clk (1, 1, cookie);
+ udelay (100);
+ if (!fns->done (cookie)) {
+ printf (" error!.\n");
+ fns->abort (cookie);
+ return FPGA_FAIL;
+ } else {
+ printf ("\b\b\b done.\n");
+ }
+
+ /* 5. call lower layer post configuration */
+ if (fns->post) {
+ if ((ret_val = fns->post (cookie)) < 0) {
+ fns->abort (cookie);
+ return ret_val;
+ }
+ }
+
+ return FPGA_SUCCESS;
+}
+
+#endif /* defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_STRATIX_II) */