| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2012 Michal Simek <monstr@monstr.eu> |
| * (C) Copyright 2013 - 2018 Xilinx, Inc. |
| */ |
| |
| #include <config.h> |
| #include <debug_uart.h> |
| #include <dfu.h> |
| #include <init.h> |
| #include <log.h> |
| #include <dm/uclass.h> |
| #include <env.h> |
| #include <env_internal.h> |
| #include <fdtdec.h> |
| #include <fpga.h> |
| #include <malloc.h> |
| #include <memalign.h> |
| #include <mmc.h> |
| #include <watchdog.h> |
| #include <wdt.h> |
| #include <zynqpl.h> |
| #include <asm/global_data.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/sys_proto.h> |
| #include "../common/board.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DEBUG_UART_BOARD_INIT) |
| void board_debug_uart_init(void) |
| { |
| /* Add initialization sequence if UART is not configured */ |
| } |
| #endif |
| |
| int board_init(void) |
| { |
| if (IS_ENABLED(CONFIG_SPL_BUILD)) |
| printf("Silicon version:\t%d\n", zynq_get_silicon_version()); |
| |
| if (CONFIG_IS_ENABLED(DM_I2C) && CONFIG_IS_ENABLED(I2C_EEPROM)) |
| xilinx_read_eeprom(); |
| |
| return 0; |
| } |
| |
| int board_late_init(void) |
| { |
| int env_targets_len = 0; |
| const char *mode; |
| char *new_targets; |
| char *env_targets; |
| |
| if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { |
| debug("Saved variables - Skipping\n"); |
| return 0; |
| } |
| |
| if (!IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) |
| return 0; |
| |
| switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) { |
| case ZYNQ_BM_QSPI: |
| mode = "qspi"; |
| env_set("modeboot", "qspiboot"); |
| break; |
| case ZYNQ_BM_NAND: |
| mode = "nand"; |
| env_set("modeboot", "nandboot"); |
| break; |
| case ZYNQ_BM_NOR: |
| mode = "nor"; |
| env_set("modeboot", "norboot"); |
| break; |
| case ZYNQ_BM_SD: |
| mode = "mmc0"; |
| env_set("modeboot", "sdboot"); |
| break; |
| case ZYNQ_BM_JTAG: |
| mode = "jtag pxe dhcp"; |
| env_set("modeboot", "jtagboot"); |
| break; |
| default: |
| mode = ""; |
| env_set("modeboot", ""); |
| break; |
| } |
| |
| /* |
| * One terminating char + one byte for space between mode |
| * and default boot_targets |
| */ |
| env_targets = env_get("boot_targets"); |
| if (env_targets) |
| env_targets_len = strlen(env_targets); |
| |
| new_targets = calloc(1, strlen(mode) + env_targets_len + 2); |
| if (!new_targets) |
| return -ENOMEM; |
| |
| sprintf(new_targets, "%s %s", mode, |
| env_targets ? env_targets : ""); |
| |
| env_set("boot_targets", new_targets); |
| |
| return board_late_init_xilinx(); |
| } |
| |
| #if !defined(CFG_SYS_SDRAM_BASE) && !defined(CFG_SYS_SDRAM_SIZE) |
| int dram_init_banksize(void) |
| { |
| return fdtdec_setup_memory_banksize(); |
| } |
| |
| int dram_init(void) |
| { |
| if (fdtdec_setup_mem_size_base() != 0) |
| return -EINVAL; |
| |
| zynq_ddrc_init(); |
| |
| return 0; |
| } |
| #else |
| int dram_init(void) |
| { |
| gd->ram_size = get_ram_size((void *)CFG_SYS_SDRAM_BASE, |
| CFG_SYS_SDRAM_SIZE); |
| |
| zynq_ddrc_init(); |
| |
| return 0; |
| } |
| #endif |
| |
| enum env_location env_get_location(enum env_operation op, int prio) |
| { |
| u32 bootmode = zynq_slcr_get_boot_mode() & ZYNQ_BM_MASK; |
| |
| if (prio) |
| return ENVL_UNKNOWN; |
| |
| switch (bootmode) { |
| case ZYNQ_BM_SD: |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT)) |
| return ENVL_FAT; |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4)) |
| return ENVL_EXT4; |
| return ENVL_NOWHERE; |
| case ZYNQ_BM_NAND: |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND)) |
| return ENVL_NAND; |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_UBI)) |
| return ENVL_UBI; |
| return ENVL_NOWHERE; |
| case ZYNQ_BM_NOR: |
| case ZYNQ_BM_QSPI: |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) |
| return ENVL_SPI_FLASH; |
| return ENVL_NOWHERE; |
| case ZYNQ_BM_JTAG: |
| default: |
| return ENVL_NOWHERE; |
| } |
| } |
| |
| #if defined(CONFIG_SET_DFU_ALT_INFO) |
| |
| #define DFU_ALT_BUF_LEN SZ_1K |
| |
| void set_dfu_alt_info(char *interface, char *devstr) |
| { |
| ALLOC_CACHE_ALIGN_BUFFER(char, buf, DFU_ALT_BUF_LEN); |
| |
| if (env_get("dfu_alt_info")) |
| return; |
| |
| memset(buf, 0, sizeof(buf)); |
| |
| switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) { |
| case ZYNQ_BM_SD: |
| snprintf(buf, DFU_ALT_BUF_LEN, |
| "mmc 0=boot.bin fat 0 1;" |
| "%s fat 0 1", CONFIG_SPL_FS_LOAD_PAYLOAD_NAME); |
| break; |
| #if defined(CONFIG_SPL_SPI_LOAD) |
| case ZYNQ_BM_QSPI: |
| snprintf(buf, DFU_ALT_BUF_LEN, |
| "sf 0:0=boot.bin raw 0 0x1500000;" |
| "%s raw 0x%x 0x500000", |
| CONFIG_SPL_FS_LOAD_PAYLOAD_NAME, |
| CONFIG_SYS_SPI_U_BOOT_OFFS); |
| break; |
| #endif |
| default: |
| return; |
| } |
| |
| env_set("dfu_alt_info", buf); |
| puts("DFU alt info setting: done\n"); |
| } |
| #endif |