ARM: dts: rockchip: update rk3188-radxarock.dts
In the Linux DT the file rk3xxx.dtsi is shared between
rk3066 and rk3188. Both rk3xxx.dtsi and rk3188.dtsi have recently
had some updates.
For a future rk3066 support in U-boot this file must also update.
Move U-boot specific things in a rk3188-radxarock-u-boot.dtsi file.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/rk3188-radxarock.dts b/arch/arm/dts/rk3188-radxarock.dts
index 10527a0..e7138a4 100644
--- a/arch/arm/dts/rk3188-radxarock.dts
+++ b/arch/arm/dts/rk3188-radxarock.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
*/
@@ -16,17 +16,7 @@
mmc0 = &mmc0;
};
- chosen {
-/* stdout-path = &uart2; */
- stdout-path = "serial2:115200n8";
- };
-
- config {
- u-boot,dm-pre-reloc;
- u-boot,boot-led = "rock:red:power";
- };
-
- memory {
+ memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x80000000>;
};
@@ -36,7 +26,7 @@
autorepeat;
power {
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@@ -48,21 +38,21 @@
gpio-leds {
compatible = "gpio-leds";
- green {
+ green_led: led-0 {
label = "rock:green:user1";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- blue {
+ blue_led: led-1 {
label = "rock:blue:user2";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- sleep {
+ sleep_led: led-2 {
label = "rock:red:power";
- gpios = <&gpio0 15 0>;
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
@@ -84,7 +74,7 @@
ir_recv: gpio-ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio0 10 1>;
+ gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_recv_pin>;
};
@@ -92,7 +82,7 @@
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "otg-vbus";
@@ -107,7 +97,7 @@
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
startup-delay-us = <100000>;
@@ -117,7 +107,7 @@
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "host-pwr";
@@ -136,17 +126,6 @@
};
};
-&dmc {
- rockchip,pctl-timing = <0x12c 0xc8 0x1f4 0x1e 0x4e 0x4 0x69 0x6
- 0x3 0x0 0x6 0x5 0xc 0x10 0x6 0x4
- 0x4 0x5 0x4 0x200 0x3 0xa 0x40 0x0
- 0x1 0x5 0x5 0x3 0xc 0x1e 0x100 0x0
- 0x4 0x0>;
- rockchip,phy-timing = <0x208c6690 0x690878 0x10022a00
- 0x220 0x40 0x0 0x0>;
- rockchip,sdram-params = <0x24716310 0 2 300000000 3 9 0>;
-};
-
&emac {
status = "okay";
@@ -159,14 +138,30 @@
phy0: ethernet-phy@0 {
reg = <0>;
interrupt-parent = <&gpio3>;
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
};
};
&cpu0 {
- cpu0-supply = <&vdd_arm>;
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
};
+&gpu {
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
@@ -175,7 +170,7 @@
compatible = "haoyu,hym8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
- interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&rtc_int>;
#clock-cells = <0>;
@@ -287,7 +282,6 @@
};
&mmc0 {
- num-slots = <1>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
@@ -318,40 +312,40 @@
act8846 {
act8846_dvs0_ctl: act8846-dvs0-ctl {
- rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>;
+ rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>;
};
};
hym8563 {
rtc_int: rtc-int {
- rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
lan8720a {
phy_int: phy-int {
- rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
ir-receiver {
ir_recv_pin: ir-recv-pin {
- rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sd0 {
sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
otg_vbus_drv: otg-vbus-drv {
- rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
@@ -368,6 +362,10 @@
status = "okay";
};
+&uart2 {
+ status = "okay";
+};
+
&uart3 {
status = "okay";
};