spl: separate SPL_FRAMEWORK config for spl and tpl

Right now enabling SPL_FRAMEWORK will also enable it for the TPL in all
cases, making the TPL bigger. There may be cases where the TPL is really
size constrained due to its underlying ram size.

Therefore introduce a new TPL_FRAMEWORK option and make the relevant
conditionals check for both. The default is set to "y if SPL_FRAMEWORK"
to mimic the previous behaviour where the TPL would always get the
SPL framework if it was enabled in SPL.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 48ee6c3..9de9a9a 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -35,7 +35,7 @@
 obj-$(CONFIG_CMD_BOOTZ) += bootm.o zimage.o
 obj-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
 else
-obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
+obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o
 obj-$(CONFIG_SPL_FRAMEWORK) += zimage.o
 obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
 endif
diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S
index c74641d..fb6c37c 100644
--- a/arch/arm/lib/crt0.S
+++ b/arch/arm/lib/crt0.S
@@ -149,7 +149,7 @@
 
 	bl	c_runtime_cpu_setup	/* we still call old routine here */
 #endif
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_FRAMEWORK)
+#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK)
 
 #if !defined(CONFIG_SPL_EARLY_BSS)
 	SPL_CLEAR_BSS
diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S
index e76b25a..04afa51 100644
--- a/arch/arm/lib/crt0_64.S
+++ b/arch/arm/lib/crt0_64.S
@@ -120,6 +120,7 @@
  */
 	bl	c_runtime_cpu_setup		/* still call old routine */
 #endif /* !CONFIG_SPL_BUILD */
+#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK)
 #if defined(CONFIG_SPL_BUILD)
 	bl	spl_relocate_stack_gd           /* may return NULL */
 	/* set up gd here, outside any C code, if new stack is returned */
@@ -152,5 +153,6 @@
 	b	board_init_r			/* PC relative jump */
 
 	/* NOTREACHED - board_init_r() does not return */
+#endif
 
 ENDPROC(_main)
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 8ac49bd..01c9dd5 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -41,5 +41,5 @@
 endif # not minimal
 
 ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
+obj-$(CONFIG_$(SPL_TPL)_FRAMEWORK) += spl.o
 endif
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 8f0ba8e..1f12283 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -1241,6 +1241,14 @@
 	  Specifies the maximum length of the U-Boot TPL image.
 	  If this value is zero, it is ignored.
 
+config TPL_FRAMEWORK
+	bool "Support TPL based upon the common SPL framework"
+	default y if SPL_FRAMEWORK
+	help
+	  Enable the SPL framework under common/spl/ for TPL builds.
+	  This framework supports MMC, NAND and YMODEM and other methods
+	  loading of U-Boot's SPL stage. If unsure, say Y.
+
 config TPL_HANDOFF
 	bool "Pass hand-off information from TPL to SPL and U-Boot proper"
 	depends on HANDOFF && TPL_BLOBLIST
diff --git a/common/spl/Makefile b/common/spl/Makefile
index 5ce6f4a..eaa57f5 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -7,7 +7,7 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
+obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o
 obj-$(CONFIG_$(SPL_TPL_)BOOTROM_SUPPORT) += spl_bootrom.o
 obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += spl_fit.o
 obj-$(CONFIG_$(SPL_TPL_)NOR_SUPPORT) += spl_nor.o
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index f8ce7da..314b02b 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -71,7 +71,11 @@
 libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
 libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
 
+ifeq ($(CONFIG_TPL_BUILD),y)
+libs-$(CONFIG_TPL_FRAMEWORK) += common/spl/
+else
 libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
+endif
 libs-y += common/init/
 
 # Special handling for a few options which support SPL/TPL