board: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c
index 4a1cfb8..ec0f223 100644
--- a/board/toradex/apalis_imx6/apalis_imx6.c
+++ b/board/toradex/apalis_imx6/apalis_imx6.c
@@ -96,7 +96,7 @@
MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_XPL_BUILD)
/* Apalis MMC1 */
iomux_v3_cfg_t const usdhc1_pads[] = {
MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -139,7 +139,7 @@
MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL),
MX6_PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(WEAK_PULLUP) | MUX_MODE_SION,
};
-#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_SPL_BUILD */
+#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_XPL_BUILD */
int mx6_rgmii_rework(struct phy_device *phydev)
{
@@ -321,7 +321,7 @@
}
#endif
-#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_XPL_BUILD)
/* use the following sequence: eMMC, MMC1, SD1 */
struct fsl_esdhc_cfg usdhc_cfg[CFG_SYS_FSL_USDHC_NUM] = {
{USDHC3_BASE_ADDR},
@@ -391,7 +391,7 @@
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
}
-#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_SPL_BUILD */
+#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_XPL_BUILD */
int board_phy_config(struct phy_device *phydev)
{
@@ -748,7 +748,7 @@
}
#endif
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#include <spl.h>
#include <linux/libfdt.h>
#include "asm/arch/mx6q-ddr.h"
@@ -1042,7 +1042,7 @@
{
}
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
static struct mxc_serial_plat mxc_serial_plat = {
.reg = (struct mxc_uart *)UART1_BASE,
diff --git a/board/toradex/apalis_imx6/do_fuse.c b/board/toradex/apalis_imx6/do_fuse.c
index b404b01..698b05b 100644
--- a/board/toradex/apalis_imx6/do_fuse.c
+++ b/board/toradex/apalis_imx6/do_fuse.c
@@ -7,7 +7,7 @@
* Helpers for i.MX OTP fusing during module production
*/
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#include <command.h>
#include <console.h>
#include <fuse.h>
@@ -94,4 +94,4 @@
"OTP fusing during module update",
"updt_fuse [-n] [-y] - boot cfg fast boot mode fusing"
);
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
diff --git a/board/toradex/apalis_imx6/pf0100.c b/board/toradex/apalis_imx6/pf0100.c
index 157aaec..7ea9bbb 100644
--- a/board/toradex/apalis_imx6/pf0100.c
+++ b/board/toradex/apalis_imx6/pf0100.c
@@ -212,7 +212,7 @@
return programmed;
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static int pf0100_prog(void)
{
int rc;
@@ -280,4 +280,4 @@
"Program the OTP fuses on the PMIC PF0100",
""
);
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
diff --git a/board/toradex/apalis_t30/Makefile b/board/toradex/apalis_t30/Makefile
index eed6070..2d07900 100644
--- a/board/toradex/apalis_t30/Makefile
+++ b/board/toradex/apalis_t30/Makefile
@@ -1,6 +1,6 @@
# Copyright (c) 2014 Marcel Ziswiler
# SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_SPL_BUILD) += apalis_t30-spl.o
+obj-$(CONFIG_XPL_BUILD) += apalis_t30-spl.o
obj-y += apalis_t30.o
diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c
index 251970b..64cf99e 100644
--- a/board/toradex/colibri_imx6/colibri_imx6.c
+++ b/board/toradex/colibri_imx6/colibri_imx6.c
@@ -86,7 +86,7 @@
MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_XPL_BUILD)
/* Colibri MMC */
iomux_v3_cfg_t const usdhc1_pads[] = {
MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -113,7 +113,7 @@
MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL),
MX6_PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL),
};
-#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_SPL_BUILD */
+#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_XPL_BUILD */
/* mux auxiliary pins to GPIO, so they can be used from the U-Boot cmdline */
iomux_v3_cfg_t const gpio_pads[] = {
@@ -289,7 +289,7 @@
}
#endif
-#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_XPL_BUILD)
/* use the following sequence: eMMC, MMC */
struct fsl_esdhc_cfg usdhc_cfg[CFG_SYS_FSL_USDHC_NUM] = {
{USDHC3_BASE_ADDR},
@@ -346,7 +346,7 @@
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
}
-#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_SPL_BUILD */
+#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_XPL_BUILD */
int board_phy_config(struct phy_device *phydev)
{
@@ -677,7 +677,7 @@
}
#endif
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#include <spl.h>
#include <linux/libfdt.h>
#include "asm/arch/mx6dl-ddr.h"
@@ -1101,7 +1101,7 @@
{
}
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
static struct mxc_serial_plat mxc_serial_plat = {
.reg = (struct mxc_uart *)UART1_BASE,
diff --git a/board/toradex/colibri_imx6/do_fuse.c b/board/toradex/colibri_imx6/do_fuse.c
index b404b01..698b05b 100644
--- a/board/toradex/colibri_imx6/do_fuse.c
+++ b/board/toradex/colibri_imx6/do_fuse.c
@@ -7,7 +7,7 @@
* Helpers for i.MX OTP fusing during module production
*/
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#include <command.h>
#include <console.h>
#include <fuse.h>
@@ -94,4 +94,4 @@
"OTP fusing during module update",
"updt_fuse [-n] [-y] - boot cfg fast boot mode fusing"
);
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
diff --git a/board/toradex/colibri_imx6/pf0100.c b/board/toradex/colibri_imx6/pf0100.c
index 58b7bc3..b5dffc8 100644
--- a/board/toradex/colibri_imx6/pf0100.c
+++ b/board/toradex/colibri_imx6/pf0100.c
@@ -197,7 +197,7 @@
return programmed;
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static int pf0100_prog(void)
{
int rc;
@@ -265,4 +265,4 @@
"Program the OTP fuses on the PMIC PF0100",
""
);
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
diff --git a/board/toradex/colibri_t30/Makefile b/board/toradex/colibri_t30/Makefile
index 8f33323..1cc801c 100644
--- a/board/toradex/colibri_t30/Makefile
+++ b/board/toradex/colibri_t30/Makefile
@@ -1,6 +1,6 @@
# Copyright (c) 2013-2014 Stefan Agner
# SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_SPL_BUILD) += colibri_t30-spl.o
+obj-$(CONFIG_XPL_BUILD) += colibri_t30-spl.o
obj-y += colibri_t30.o
diff --git a/board/toradex/common/Makefile b/board/toradex/common/Makefile
index 7b19b6e..7e39054 100644
--- a/board/toradex/common/Makefile
+++ b/board/toradex/common/Makefile
@@ -2,7 +2,7 @@
# Copyright (c) 2016 Toradex, Inc.
# Common for all Toradex modules
-ifeq ($(CONFIG_SPL_BUILD),y)
+ifeq ($(CONFIG_XPL_BUILD),y)
# Necessary to create built-in.o
obj- := __dummy__.o
else
diff --git a/board/toradex/verdin-imx8mm/Makefile b/board/toradex/verdin-imx8mm/Makefile
index b380542..eee58aa 100644
--- a/board/toradex/verdin-imx8mm/Makefile
+++ b/board/toradex/verdin-imx8mm/Makefile
@@ -5,7 +5,7 @@
obj-y += verdin-imx8mm.o
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
obj-y += spl.o
obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o
endif
diff --git a/board/toradex/verdin-imx8mp/Makefile b/board/toradex/verdin-imx8mp/Makefile
index 98fa14e..5edd177 100644
--- a/board/toradex/verdin-imx8mp/Makefile
+++ b/board/toradex/verdin-imx8mp/Makefile
@@ -5,7 +5,7 @@
obj-y += verdin-imx8mp.o
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
obj-y += spl.o
obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o
endif