diff --git a/arch/x86/cpu/quark/mrc.c b/arch/x86/cpu/quark/mrc.c
new file mode 100644
index 0000000..7eb34c5
--- /dev/null
+++ b/arch/x86/cpu/quark/mrc.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * Ported from Intel released Quark UEFI BIOS
+ * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei
+ *
+ * SPDX-License-Identifier:	Intel
+ */
+
+/*
+ * This is the main Quark Memory Reference Code (MRC)
+ *
+ * These functions are generic and should work for any Quark-based board.
+ *
+ * MRC requires two data structures to be passed in which are initialized by
+ * mrc_adjust_params().
+ *
+ * The basic flow is as follows:
+ * 01) Check for supported DDR speed configuration
+ * 02) Set up Memory Manager buffer as pass-through (POR)
+ * 03) Set Channel Interleaving Mode and Channel Stride to the most aggressive
+ *     setting possible
+ * 04) Set up the Memory Controller logic
+ * 05) Set up the DDR_PHY logic
+ * 06) Initialise the DRAMs (JEDEC)
+ * 07) Perform the Receive Enable Calibration algorithm
+ * 08) Perform the Write Leveling algorithm
+ * 09) Perform the Read Training algorithm (includes internal Vref)
+ * 10) Perform the Write Training algorithm
+ * 11) Set Channel Interleaving Mode and Channel Stride to the desired settings
+ *
+ * DRAM unit configuration based on Valleyview MRC.
+ */
+
+#include <common.h>
+#include <asm/arch/mrc.h>
+#include <asm/arch/msg_port.h>
+#include "mrc_util.h"
+#include "smc.h"
+
+static const struct mem_init init[] = {
+	{ 0x0101, BM_COLD | BM_FAST | BM_WARM | BM_S3, clear_self_refresh       },
+	{ 0x0200, BM_COLD | BM_FAST | BM_WARM | BM_S3, prog_ddr_timing_control  },
+	{ 0x0103, BM_COLD | BM_FAST                  , prog_decode_before_jedec },
+	{ 0x0104, BM_COLD | BM_FAST                  , perform_ddr_reset        },
+	{ 0x0300, BM_COLD | BM_FAST           | BM_S3, ddrphy_init              },
+	{ 0x0400, BM_COLD | BM_FAST                  , perform_jedec_init       },
+	{ 0x0105, BM_COLD | BM_FAST                  , set_ddr_init_complete    },
+	{ 0x0106,           BM_FAST | BM_WARM | BM_S3, restore_timings          },
+	{ 0x0106, BM_COLD                            , default_timings          },
+	{ 0x0500, BM_COLD                            , rcvn_cal                 },
+	{ 0x0600, BM_COLD                            , wr_level                 },
+	{ 0x0120, BM_COLD                            , prog_page_ctrl           },
+	{ 0x0700, BM_COLD                            , rd_train                 },
+	{ 0x0800, BM_COLD                            , wr_train                 },
+	{ 0x010b, BM_COLD                            , store_timings            },
+	{ 0x010c, BM_COLD | BM_FAST | BM_WARM | BM_S3, enable_scrambling        },
+	{ 0x010d, BM_COLD | BM_FAST | BM_WARM | BM_S3, prog_ddr_control         },
+	{ 0x010e, BM_COLD | BM_FAST | BM_WARM | BM_S3, prog_dra_drb             },
+	{ 0x010f,                     BM_WARM | BM_S3, perform_wake             },
+	{ 0x0110, BM_COLD | BM_FAST | BM_WARM | BM_S3, change_refresh_period    },
+	{ 0x0111, BM_COLD | BM_FAST | BM_WARM | BM_S3, set_auto_refresh         },
+	{ 0x0112, BM_COLD | BM_FAST | BM_WARM | BM_S3, ecc_enable               },
+	{ 0x0113, BM_COLD | BM_FAST                  , memory_test              },
+	{ 0x0114, BM_COLD | BM_FAST | BM_WARM | BM_S3, lock_registers           }
+};
+
+/* Adjust configuration parameters before initialization sequence */
+static void mrc_adjust_params(struct mrc_params *mrc_params)
+{
+	const struct dram_params *dram_params;
+	uint8_t dram_width;
+	uint32_t rank_enables;
+	uint32_t channel_width;
+
+	ENTERFN();
+
+	/* initially expect success */
+	mrc_params->status = MRC_SUCCESS;
+
+	dram_width = mrc_params->dram_width;
+	rank_enables = mrc_params->rank_enables;
+	channel_width = mrc_params->channel_width;
+
+	/*
+	 * Setup board layout (must be reviewed as is selecting static timings)
+	 * 0 == R0 (DDR3 x16), 1 == R1 (DDR3 x16),
+	 * 2 == DV (DDR3 x8), 3 == SV (DDR3 x8).
+	 */
+	if (dram_width == X8)
+		mrc_params->board_id = 2;	/* select x8 layout */
+	else
+		mrc_params->board_id = 0;	/* select x16 layout */
+
+	/* initially no memory */
+	mrc_params->mem_size = 0;
+
+	/* begin of channel settings */
+	dram_params = &mrc_params->params;
+
+	/*
+	 * Determine column bits:
+	 *
+	 * Column: 11 for 8Gbx8, else 10
+	 */
+	mrc_params->column_bits[0] =
+		((dram_params[0].density == 4) &&
+		(dram_width == X8)) ? (11) : (10);
+
+	/*
+	 * Determine row bits:
+	 *
+	 * 512Mbx16=12 512Mbx8=13
+	 * 1Gbx16=13   1Gbx8=14
+	 * 2Gbx16=14   2Gbx8=15
+	 * 4Gbx16=15   4Gbx8=16
+	 * 8Gbx16=16   8Gbx8=16
+	 */
+	mrc_params->row_bits[0] = 12 + (dram_params[0].density) +
+		(((dram_params[0].density < 4) &&
+		(dram_width == X8)) ? (1) : (0));
+
+	/*
+	 * Determine per-channel memory size:
+	 *
+	 * (For 2 RANKs, multiply by 2)
+	 * (For 16 bit data bus, divide by 2)
+	 *
+	 * DENSITY WIDTH MEM_AVAILABLE
+	 * 512Mb   x16   0x008000000 ( 128MB)
+	 * 512Mb   x8    0x010000000 ( 256MB)
+	 * 1Gb     x16   0x010000000 ( 256MB)
+	 * 1Gb     x8    0x020000000 ( 512MB)
+	 * 2Gb     x16   0x020000000 ( 512MB)
+	 * 2Gb     x8    0x040000000 (1024MB)
+	 * 4Gb     x16   0x040000000 (1024MB)
+	 * 4Gb     x8    0x080000000 (2048MB)
+	 */
+	mrc_params->channel_size[0] = (1 << dram_params[0].density);
+	mrc_params->channel_size[0] *= (dram_width == X8) ? 2 : 1;
+	mrc_params->channel_size[0] *= (rank_enables == 0x3) ? 2 : 1;
+	mrc_params->channel_size[0] *= (channel_width == X16) ? 1 : 2;
+
+	/* Determine memory size (convert number of 64MB/512Mb units) */
+	mrc_params->mem_size += mrc_params->channel_size[0] << 26;
+
+	LEAVEFN();
+}
+
+static void mrc_mem_init(struct mrc_params *mrc_params)
+{
+	int i;
+
+	ENTERFN();
+
+	/* MRC started */
+	mrc_post_code(0x01, 0x00);
+
+	if (mrc_params->boot_mode != BM_COLD) {
+		if (mrc_params->ddr_speed != mrc_params->timings.ddr_speed) {
+			/* full training required as frequency changed */
+			mrc_params->boot_mode = BM_COLD;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(init); i++) {
+		uint64_t my_tsc;
+
+		if (mrc_params->boot_mode & init[i].boot_path) {
+			uint8_t major = init[i].post_code >> 8 & 0xff;
+			uint8_t minor = init[i].post_code >> 0 & 0xff;
+			mrc_post_code(major, minor);
+
+			my_tsc = rdtsc();
+			init[i].init_fn(mrc_params);
+			DPF(D_TIME, "Execution time %llx", rdtsc() - my_tsc);
+		}
+	}
+
+	/* display the timings */
+	print_timings(mrc_params);
+
+	/* MRC complete */
+	mrc_post_code(0x01, 0xff);
+
+	LEAVEFN();
+}
+
+void mrc_init(struct mrc_params *mrc_params)
+{
+	ENTERFN();
+
+	DPF(D_INFO, "MRC Version %04x %s %s\n", MRC_VERSION,
+	    __DATE__, __TIME__);
+
+	/* Set up the data structures used by mrc_mem_init() */
+	mrc_adjust_params(mrc_params);
+
+	/* Initialize system memory */
+	mrc_mem_init(mrc_params);
+
+	LEAVEFN();
+}
diff --git a/arch/x86/include/asm/arch-quark/mrc.h b/arch/x86/include/asm/arch-quark/mrc.h
new file mode 100644
index 0000000..150fbea
--- /dev/null
+++ b/arch/x86/include/asm/arch-quark/mrc.h
@@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * Ported from Intel released Quark UEFI BIOS
+ * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei
+ *
+ * SPDX-License-Identifier:	Intel
+ */
+
+#ifndef _MRC_H_
+#define _MRC_H_
+
+#define MRC_VERSION	0x0111
+
+/* architectural definitions */
+#define NUM_CHANNELS	1	/* number of channels */
+#define NUM_RANKS	2	/* number of ranks per channel */
+#define NUM_BYTE_LANES	4	/* number of byte lanes per channel */
+
+/* software limitations */
+#define MAX_CHANNELS	1
+#define MAX_RANKS	2
+#define MAX_BYTE_LANES	4
+
+#define MAX_SOCKETS	1
+#define MAX_SIDES	1
+#define MAX_ROWS	(MAX_SIDES * MAX_SOCKETS)
+
+/* Specify DRAM and channel width */
+enum {
+	X8,	/* DRAM width */
+	X16,	/* DRAM width & Channel Width */
+	X32	/* Channel Width */
+};
+
+/* Specify DRAM speed */
+enum {
+	DDRFREQ_800,
+	DDRFREQ_1066
+};
+
+/* Specify DRAM type */
+enum {
+	DDR3,
+	DDR3L
+};
+
+/*
+ * density: 0=512Mb, 1=Gb, 2=2Gb, 3=4Gb
+ * cl: DRAM CAS Latency in clocks
+ * ras: ACT to PRE command period
+ * wtr: Delay from start of internal write transaction to internal read command
+ * rrd: ACT to ACT command period (JESD79 specific to page size 1K/2K)
+ * faw: Four activate window (JESD79 specific to page size 1K/2K)
+ *
+ * ras/wtr/rrd/faw timings are in picoseconds
+ *
+ * Refer to JEDEC spec (or DRAM datasheet) when changing these values.
+ */
+struct dram_params {
+	uint8_t density;
+	uint8_t cl;
+	uint32_t ras;
+	uint32_t wtr;
+	uint32_t rrd;
+	uint32_t faw;
+};
+
+/*
+ * Delay configuration for individual signals
+ * Vref setting
+ * Scrambler seed
+ */
+struct mrc_timings {
+	uint32_t rcvn[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES];
+	uint32_t rdqs[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES];
+	uint32_t wdqs[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES];
+	uint32_t wdq[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES];
+	uint32_t vref[NUM_CHANNELS][NUM_BYTE_LANES];
+	uint32_t wctl[NUM_CHANNELS][NUM_RANKS];
+	uint32_t wcmd[NUM_CHANNELS];
+	uint32_t scrambler_seed;
+	/* need to save for the case of frequency change */
+	uint8_t ddr_speed;
+};
+
+/* Boot mode defined as bit mask (1<<n) */
+enum {
+	BM_UNKNOWN,
+	BM_COLD = 1,	/* full training */
+	BM_FAST = 2,	/* restore timing parameters */
+	BM_S3   = 4,	/* resume from S3 */
+	BM_WARM = 8
+};
+
+/* MRC execution status */
+#define MRC_SUCCESS	0	/* initialization ok */
+#define MRC_E_MEMTEST	1	/* memtest failed */
+
+/*
+ * Memory Reference Code parameters
+ *
+ * It includes 3 parts:
+ * - input parameters like boot mode and DRAM parameters
+ * - context parameters for MRC internal state
+ * - output parameters like initialization result and memory size
+ */
+struct mrc_params {
+	/* Input parameters */
+	uint32_t boot_mode;		/* BM_COLD, BM_FAST, BM_WARM, BM_S3 */
+	/* DRAM parameters */
+	uint8_t dram_width;		/* x8, x16 */
+	uint8_t ddr_speed;		/* DDRFREQ_800, DDRFREQ_1066 */
+	uint8_t ddr_type;		/* DDR3, DDR3L */
+	uint8_t ecc_enables;		/* 0, 1 (memory size reduced to 7/8) */
+	uint8_t scrambling_enables;	/* 0, 1 */
+	/* 1, 3 (1'st rank has to be populated if 2'nd rank present) */
+	uint32_t rank_enables;
+	uint32_t channel_enables;	/* 1 only */
+	uint32_t channel_width;		/* x16 only */
+	/* 0, 1, 2 (mode 2 forced if ecc enabled) */
+	uint32_t address_mode;
+	/* REFRESH_RATE: 1=1.95us, 2=3.9us, 3=7.8us, others=RESERVED */
+	uint8_t refresh_rate;
+	/* SR_TEMP_RANGE: 0=normal, 1=extended, others=RESERVED */
+	uint8_t sr_temp_range;
+	/*
+	 * RON_VALUE: 0=34ohm, 1=40ohm, others=RESERVED
+	 * (select MRS1.DIC driver impedance control)
+	 */
+	uint8_t ron_value;
+	/* RTT_NOM_VALUE: 0=40ohm, 1=60ohm, 2=120ohm, others=RESERVED */
+	uint8_t rtt_nom_value;
+	/* RD_ODT_VALUE: 0=off, 1=60ohm, 2=120ohm, 3=180ohm, others=RESERVED */
+	uint8_t rd_odt_value;
+	struct dram_params params;
+	/* Internally used context parameters */
+	uint32_t board_id;	/* board layout (use x8 or x16 memory) */
+	uint32_t hte_setup;	/* when set hte reconfiguration requested */
+	uint32_t menu_after_mrc;
+	uint32_t power_down_disable;
+	uint32_t tune_rcvn;
+	uint32_t channel_size[NUM_CHANNELS];
+	uint32_t column_bits[NUM_CHANNELS];
+	uint32_t row_bits[NUM_CHANNELS];
+	uint32_t mrs1;		/* register content saved during training */
+	uint8_t first_run;
+	/* Output parameters */
+	/* initialization result (non zero specifies error code) */
+	uint32_t status;
+	/* total memory size in bytes (excludes ECC banks) */
+	uint32_t mem_size;
+	/* training results (also used on input) */
+	struct mrc_timings timings;
+};
+
+/*
+ * MRC memory initialization structure
+ *
+ * post_code: a 16-bit post code of a specific initialization routine
+ * boot_path: bitwise or of BM_COLD, BM_FAST, BM_WARM and BM_S3
+ * init_fn: real memory initialization routine
+ */
+struct mem_init {
+	uint16_t post_code;
+	uint16_t boot_path;
+	void (*init_fn)(struct mrc_params *mrc_params);
+};
+
+/* MRC platform data flags */
+#define MRC_FLAG_ECC_EN		0x00000001
+#define MRC_FLAG_SCRAMBLE_EN	0x00000002
+#define MRC_FLAG_MEMTEST_EN	0x00000004
+/* 0b DDR "fly-by" topology else 1b DDR "tree" topology */
+#define MRC_FLAG_TOP_TREE_EN	0x00000008
+/* If set ODR signal is asserted to DRAM devices on writes */
+#define MRC_FLAG_WR_ODT_EN	0x00000010
+
+/**
+ * mrc_init - Memory Reference Code initialization entry routine
+ *
+ * @mrc_params: parameters for MRC
+ */
+void mrc_init(struct mrc_params *mrc_params);
+
+#endif /* _MRC_H_ */