ahci: cosmetics and cleanup
- print the correct speed
- print all the AHCI capability flags
(information taken from Linux kernel driver)
- clean up some comments
For example, this might show the following string:
AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Commit-Ready: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index af31c97..0a7ad81 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -194,7 +194,7 @@
/* set irq mask (enables interrupts) */
writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
- /*register linkup ports */
+ /* register linkup ports */
tmp = readl(port_mmio + PORT_SCR_STAT);
debug("Port %d status: 0x%x\n", i, tmp);
if ((tmp & 0xf) == 0x03)
@@ -222,12 +222,13 @@
u16 cc;
#endif
volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
- u32 vers, cap, impl, speed;
+ u32 vers, cap, cap2, impl, speed;
const char *speed_s;
const char *scc_s;
vers = readl(mmio + HOST_VERSION);
cap = probe_ent->cap;
+ cap2 = readl(mmio + HOST_CAP2);
impl = probe_ent->port_map;
speed = (cap >> 20) & 0xf;
@@ -235,6 +236,8 @@
speed_s = "1.5";
else if (speed == 2)
speed_s = "3";
+ else if (speed == 3)
+ speed_s = "6";
else
speed_s = "?";
@@ -260,8 +263,9 @@
((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s);
printf("flags: "
- "%s%s%s%s%s%s"
- "%s%s%s%s%s%s%s\n",
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s\n",
cap & (1 << 31) ? "64bit " : "",
cap & (1 << 30) ? "ncq " : "",
cap & (1 << 28) ? "ilck " : "",
@@ -272,9 +276,16 @@
cap & (1 << 19) ? "nz " : "",
cap & (1 << 18) ? "only " : "",
cap & (1 << 17) ? "pmp " : "",
+ cap & (1 << 16) ? "fbss " : "",
cap & (1 << 15) ? "pio " : "",
cap & (1 << 14) ? "slum " : "",
- cap & (1 << 13) ? "part " : "");
+ cap & (1 << 13) ? "part " : "",
+ cap & (1 << 7) ? "ccc " : "",
+ cap & (1 << 6) ? "ems " : "",
+ cap & (1 << 5) ? "sxs " : "",
+ cap2 & (1 << 2) ? "apst " : "",
+ cap2 & (1 << 1) ? "nvmp " : "",
+ cap2 & (1 << 0) ? "boh " : "");
}
#ifndef CONFIG_SCSI_AHCI_PLAT
@@ -369,7 +380,7 @@
u32 cmd_fis_len = 5; /* five dwords */
u8 fis[20];
- /*set feature */
+ /* set feature */
memset(fis, 0, 20);
fis[0] = 0x27;
fis[1] = 1 << 7;
@@ -383,7 +394,7 @@
readl(port_mmio + PORT_CMD_ISSUE);
if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) {
- printf("set feature error!\n");
+ printf("set feature error on port %d!\n", port);
}
}
diff --git a/include/ahci.h b/include/ahci.h
index c4fb9e7..babbdc6 100644
--- a/include/ahci.h
+++ b/include/ahci.h
@@ -51,6 +51,7 @@
#define HOST_IRQ_STAT 0x08 /* interrupt status */
#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */
#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */
+#define HOST_CAP2 0x24 /* host capabilities, extended */
/* HOST_CTL bits */
#define HOST_RESET (1 << 0) /* reset controller; self-clear */