include/configs/colibri_imx6.h - filogic/uboot - Gitiles

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2013-2019 Toradex, Inc.
  *
  * Configuration settings for the Toradex Colibri iMX6
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include "mx6_common.h"

 #undef CONFIG_DISPLAY_BOARDINFO

 #include <asm/arch/imx-regs.h>
 #include <asm/mach-imx/gpio.h>

 #ifdef CONFIG_SPL
 #include "imx6_spl.h"
 #endif

 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 #define CONFIG_SERIAL_TAG

 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(32 * 1024 * 1024)

 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE

 /* I2C Configs */
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_MXC_I2C3_SPEED	400000

 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	2

 /* Network */
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RMII
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		1
 #define CONFIG_TFTP_TSIZE

 /* USB Configs */
 /* Host */
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 /* Client */
 #define CONFIG_USBD_HS

 /* Framebuffer and LCD */
 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE

 /* Command definition */
 #undef CONFIG_CMD_LOADB
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_FLASH

 #undef CONFIG_IPADDR
 #define CONFIG_IPADDR			192.168.10.2
 #define CONFIG_NETMASK			255.255.255.0
 #undef CONFIG_SERVERIP
 #define CONFIG_SERVERIP			192.168.10.1

 #define CONFIG_LOADADDR			0x12000000

 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
 	func(USB, usb, 0) \
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 #undef BOOTENV_RUN_NET_USB_START
 #define BOOTENV_RUN_NET_USB_START ""
 #else /* CONFIG_SPL_BUILD */
 #define BOOTENV
 #endif /* CONFIG_SPL_BUILD */

 #define DFU_ALT_EMMC_INFO \
 	"u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 	"boot part 0 1;" \
 	"rootfs part 0 2;" \
 	"zImage fat 0 1;" \
 	"imx6dl-colibri-eval-v3.dtb fat 0 1;" \
 	"imx6dl-colibri-cam-eval-v3.dtb fat 0 1"

 #define EMMC_BOOTCMD \
 	"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} "\
 		"rw,noatime rootfstype=ext4 " \
 		"rootwait\0" \
 	"emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
 		"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 		"${vidargs}; echo Booting from internal eMMC chip...; "	\
 		"run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \
 		"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
 		"bootz ${kernel_addr_r} ${dtbparam}\0" \
 	"emmcbootpart=1\0" \
 	"emmcdev=0\0" \
 	"emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
 		"${fdt_addr_r} ${fdt_file} && " \
 		"setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \
 	"emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
 	"emmcrootpart=2\0"

 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x12100000\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"kernel_addr_r=0x11000000\0" \
 	"pxefile_addr_r=0x17100000\0" \
 	"ramdisk_addr_r=0x12200000\0" \
 	"scriptaddr=0x17000000\0"

 #define NFS_BOOTCMD \
 	"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 	"nfsboot=run setup; " \
 		"setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 		"${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 		"run nfsdtbload; dhcp ${kernel_addr_r} " \
 		"&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \
 	"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 		"&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"

 #define SD_BOOTCMD \
 	"set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} rw,noatime " \
 		"rootfstype=ext4 rootwait\0" \
 	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
 		"setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 		"${vidargs}; echo Booting from SD card; " \
 		"run sddtbload; load mmc ${sddev}:${sdbootpart} "\
 		"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
 		"bootz ${kernel_addr_r} ${dtbparam}\0" \
 	"sdbootpart=1\0" \
 	"sddev=1\0" \
 	"sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
 		"${fdt_addr_r} ${fdt_file} && setenv dtbparam \" - " \
 		"${fdt_addr_r}\" && true\0" \
 	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
 	"sdrootpart=2\0"

 #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
 		"usb start ; " \
 		"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 	"boot_file=zImage\0" \
 	"console=ttymxc0\0" \
 	"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
 	"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 	EMMC_BOOTCMD \
 	"fdt_file=" FDT_FILE "\0" \
 	"fdt_fixup=;\0" \
 	MEM_LAYOUT_ENV_SETTINGS \
 	NFS_BOOTCMD \
 	SD_BOOTCMD \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 		"flash_eth.img && source ${loadaddr}\0" \
 	"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 		"${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 		"source ${loadaddr}\0" \
 	"setup=setenv setupargs fec_mac=${ethaddr} " \
 		"consoleblank=0 no_console_suspend=1 console=tty1 " \
 		"console=${console},${baudrate}n8\0 " \
 	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 	"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 		"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 		"source ${loadaddr}\0" \
 	"splashpos=m,m\0" \
 	"splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
 	"vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
 		"video=mxcfb1:off fbmem=8M\0 "

 /* Miscellaneous configurable options */
 #undef CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_CBSIZE		1024
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		48

 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		0x10010000
 #define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000

 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 /* environment organization */
 #define CONFIG_ENV_SIZE			(8 * 1024)

 #if defined(CONFIG_ENV_IS_IN_MMC)
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 #define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
 					 CONFIG_TDX_CFG_BLOCK_OFFSET)
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_SYS_MMC_ENV_PART		1
 #endif

 #define CONFIG_CMD_TIME

 #endif	/* __CONFIG_H */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Copyright 2013-2019 Toradex, Inc.
	*
	* Configuration settings for the Toradex Colibri iMX6
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include "mx6_common.h"

	#undef CONFIG_DISPLAY_BOARDINFO

	#include <asm/arch/imx-regs.h>
	#include <asm/mach-imx/gpio.h>

	#ifdef CONFIG_SPL
	#include "imx6_spl.h"
	#endif

	#define CONFIG_CMDLINE_TAG
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_INITRD_TAG
	#define CONFIG_REVISION_TAG
	#define CONFIG_SERIAL_TAG

	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)

	#define CONFIG_MXC_UART
	#define CONFIG_MXC_UART_BASE UART1_BASE

	/* I2C Configs */
	#define CONFIG_SYS_I2C_MXC
	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	#define CONFIG_SYS_I2C_SPEED 100000
	#define CONFIG_SYS_MXC_I2C3_SPEED 400000

	/* MMC Configs */
	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	#define CONFIG_SYS_FSL_USDHC_NUM 2

	/* Network */
	#define CONFIG_FEC_MXC
	#define IMX_FEC_BASE ENET_BASE_ADDR
	#define CONFIG_FEC_XCV_TYPE RMII
	#define CONFIG_ETHPRIME "FEC"
	#define CONFIG_FEC_MXC_PHYADDR 1
	#define CONFIG_TFTP_TSIZE

	/* USB Configs */
	/* Host */
	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	#define CONFIG_MXC_USB_FLAGS 0
	/* Client */
	#define CONFIG_USBD_HS

	/* Framebuffer and LCD */
	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_SPLASH_SCREEN
	#define CONFIG_SPLASH_SCREEN_ALIGN
	#define CONFIG_BMP_16BPP
	#define CONFIG_VIDEO_LOGO
	#define CONFIG_VIDEO_BMP_LOGO
	#define CONFIG_CONSOLE_MUX
	#define CONFIG_IMX_HDMI
	#define CONFIG_IMX_VIDEO_SKIP

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE

	/* Command definition */
	#undef CONFIG_CMD_LOADB
	#undef CONFIG_CMD_LOADS
	#undef CONFIG_CMD_NFS
	#undef CONFIG_CMD_FLASH

	#undef CONFIG_IPADDR
	#define CONFIG_IPADDR 192.168.10.2
	#define CONFIG_NETMASK 255.255.255.0
	#undef CONFIG_SERVERIP
	#define CONFIG_SERVERIP 192.168.10.1

	#define CONFIG_LOADADDR 0x12000000

	#ifndef CONFIG_SPL_BUILD
	#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(MMC, mmc, 1) \
	func(USB, usb, 0) \
	func(DHCP, dhcp, na)
	#include <config_distro_bootcmd.h>
	#undef BOOTENV_RUN_NET_USB_START
	#define BOOTENV_RUN_NET_USB_START ""
	#else /* CONFIG_SPL_BUILD */
	#define BOOTENV
	#endif /* CONFIG_SPL_BUILD */

	#define DFU_ALT_EMMC_INFO \
	"u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
	"boot part 0 1;" \
	"rootfs part 0 2;" \
	"zImage fat 0 1;" \
	"imx6dl-colibri-eval-v3.dtb fat 0 1;" \
	"imx6dl-colibri-cam-eval-v3.dtb fat 0 1"

	#define EMMC_BOOTCMD \
	"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} "\
	"rw,noatime rootfstype=ext4 " \
	"rootwait\0" \
	"emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
	"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
	"${vidargs}; echo Booting from internal eMMC chip...; " \
	"run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \
	"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
	"bootz ${kernel_addr_r} ${dtbparam}\0" \
	"emmcbootpart=1\0" \
	"emmcdev=0\0" \
	"emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
	"${fdt_addr_r} ${fdt_file} && " \
	"setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \
	"emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
	"emmcrootpart=2\0"

	#define MEM_LAYOUT_ENV_SETTINGS \
	"bootm_size=0x10000000\0" \
	"fdt_addr_r=0x12100000\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"kernel_addr_r=0x11000000\0" \
	"pxefile_addr_r=0x17100000\0" \
	"ramdisk_addr_r=0x12200000\0" \
	"scriptaddr=0x17000000\0"

	#define NFS_BOOTCMD \
	"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
	"nfsboot=run setup; " \
	"setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
	"${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
	"run nfsdtbload; dhcp ${kernel_addr_r} " \
	"&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \
	"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
	"&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"

	#define SD_BOOTCMD \
	"set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} rw,noatime " \
	"rootfstype=ext4 rootwait\0" \
	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
	"setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
	"${vidargs}; echo Booting from SD card; " \
	"run sddtbload; load mmc ${sddev}:${sdbootpart} "\
	"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
	"bootz ${kernel_addr_r} ${dtbparam}\0" \
	"sdbootpart=1\0" \
	"sddev=1\0" \
	"sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
	"${fdt_addr_r} ${fdt_file} && setenv dtbparam \" - " \
	"${fdt_addr_r}\" && true\0" \
	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
	"sdrootpart=2\0"

	#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
	#define CONFIG_EXTRA_ENV_SETTINGS \
	BOOTENV \
	"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
	"usb start ; " \
	"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
	"boot_file=zImage\0" \
	"console=ttymxc0\0" \
	"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
	"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
	EMMC_BOOTCMD \
	"fdt_file=" FDT_FILE "\0" \
	"fdt_fixup=;\0" \
	MEM_LAYOUT_ENV_SETTINGS \
	NFS_BOOTCMD \
	SD_BOOTCMD \
	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
	"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
	"flash_eth.img && source ${loadaddr}\0" \
	"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
	"${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"setup=setenv setupargs fec_mac=${ethaddr} " \
	"consoleblank=0 no_console_suspend=1 console=tty1 " \
	"console=${console},${baudrate}n8\0 " \
	"setupdate=run setsdupdate \|\| run setusbupdate \|\| run setethupdate\0" \
	"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
	"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"splashpos=m,m\0" \
	"splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
	"vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
	"video=mxcfb1:off fbmem=8M\0 "

	/* Miscellaneous configurable options */
	#undef CONFIG_SYS_CBSIZE
	#define CONFIG_SYS_CBSIZE 1024
	#undef CONFIG_SYS_MAXARGS
	#define CONFIG_SYS_MAXARGS 48

	#define CONFIG_SYS_MEMTEST_START 0x10000000
	#define CONFIG_SYS_MEMTEST_END 0x10010000
	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000

	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

	/* Physical Memory Map */
	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	/* environment organization */
	#define CONFIG_ENV_SIZE (8 * 1024)

	#if defined(CONFIG_ENV_IS_IN_MMC)
	/* Environment in eMMC, before config block at the end of 1st "boot sector" */
	#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
	CONFIG_TDX_CFG_BLOCK_OFFSET)
	#define CONFIG_SYS_MMC_ENV_DEV 0
	#define CONFIG_SYS_MMC_ENV_PART 1
	#endif

	#define CONFIG_CMD_TIME

	#endif /* __CONFIG_H */