imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi
When using a board variant that selects the lvds specific dtb the
*.u-boot.dtsi file will not be included. To have a lvds dtb specific
u-boot.dtsi file move this part to a common board u-boot.dtsi file and
include this in the board base u-boot.dtsi and create an additional one
for the lvds variant.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
diff --git a/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
new file mode 100644
index 0000000..22d18e6
--- /dev/null
+++ b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+#include "imx8mm-u-boot.dtsi"
+
+/ {
+ aliases {
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
+ };
+
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdog1>;
+ u-boot,dm-spl;
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+};
+
+&fec1 {
+ phy-mode = "rgmii-rxid";
+};
+
+&i2c1 {
+ u-boot,dm-spl;
+ u-boot,dm-pre-reloc;
+};
+
+&i2c2 {
+ status = "okay";
+ u-boot,dm-spl;
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_ecspi1 {
+ u-boot,dm-spl;
+};
+
+&pinctrl_i2c1 {
+ u-boot,dm-spl;
+};
+
+&pinctrl_pmic {
+ u-boot,dm-spl;
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141
+ /* Disable Pullup for SD_VSEL */
+ MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41
+ >;
+};
+
+&pinctrl_uart3 {
+ u-boot,dm-spl;
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_usdhc1 {
+ u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1_100mhz {
+ u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1_200mhz {
+ u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+ u-boot,dm-spl;
+};
+
+&pca9450 {
+ u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} {
+ u-boot,dm-spl;
+};
+
+&ecspi1 {
+ u-boot,dm-spl;
+};
+
+&gpio1 {
+ u-boot,dm-spl;
+};
+
+&gpio2 {
+ u-boot,dm-spl;
+};
+
+&gpio3 {
+ u-boot,dm-spl;
+};
+
+&gpio4 {
+ u-boot,dm-spl;
+};
+
+&gpio5 {
+ u-boot,dm-spl;
+};
+
+&uart3 {
+ u-boot,dm-spl;
+ u-boot,dm-pre-reloc;
+};
+
+&usdhc1 {
+ u-boot,dm-spl;
+};
+
+&usdhc2 {
+ u-boot,dm-spl;
+};
+
+&wdog1 {
+ u-boot,dm-spl;
+};