i2c, soft-i2c: switch to new multibus/multiadapter support
- added to soft_i2c driver new multibus/multiadpater support
- adapted all config files, which uses this driver
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
diff --git a/include/configs/A3000.h b/include/configs/A3000.h
index d506a55..340c685 100644
--- a/include/configs/A3000.h
+++ b/include/configs/A3000.h
@@ -86,8 +86,8 @@
* PCI stuff
*-----------------------------------------------------------------------
*/
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_HARD_I2C 1 /* To enable I2C support */
+#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index b5911c6..a3f6440 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -277,7 +277,6 @@
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address*/
diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h
index be9238e..fd3eff0 100644
--- a/include/configs/CANBT.h
+++ b/include/configs/CANBT.h
@@ -180,6 +180,7 @@
/*-----------------------------------------------------------------------
* I2C EEPROM (CAT24WC08) for environment
*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
#define CONFIG_HARD_I2C /* I2C with hardware support */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index 7ac182f..43b07cf 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -129,10 +129,11 @@
/*-----------------------------------------------------------------------
* I2C/EEPROM/RTC configuration
*/
-#define CONFIG_SOFT_I2C /* Software I2C support enabled */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
-# define CONFIG_SYS_I2C_SPEED 50000
-# define CONFIG_SYS_I2C_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index 3e9c21c..9c3b3d5 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -133,10 +133,11 @@
/*-----------------------------------------------------------------------
* I2C/EEPROM/RTC configuration
*/
-#define CONFIG_SOFT_I2C /* Software I2C support enabled */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
-# define CONFIG_SYS_I2C_SPEED 50000
-# define CONFIG_SYS_I2C_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 4970ea6..152821f 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -171,7 +171,6 @@
* I2C
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 9a649ca..cc03d39 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -158,26 +158,33 @@
/*
* Enable I2C and select the hardware/software driver
*/
-#define CONFIG_HARD_I2C 1 /* CPM based I2C */
-#undef CONFIG_SOFT_I2C /* Bit-banged I2C */
+#define CONFIG_HARD_I2C 1 /* CPM based I2C */
+#undef CONFIG_SYS_I2C_SOFT /* Bit-banged I2C */
#ifdef CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000 /* clock speed in Hz */
-#define CONFIG_SYS_I2C_SLAVE 0xFE /* I2C slave address */
+#define CONFIG_SYS_I2C_SPEED 100000 /* clock speed in Hz */
+#define CONFIG_SYS_I2C_SLAVE 0xFE /* I2C slave address */
#endif
-#ifdef CONFIG_SOFT_I2C
-#define PB_SCL 0x00000020 /* PB 26 */
-#define PB_SDA 0x00000010 /* PB 27 */
-#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
-#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
-#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
-#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
-#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
- else immr->im_cpm.cp_pbdat &= ~PB_SDA
-#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
- else immr->im_cpm.cp_pbdat &= ~PB_SCL
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
+#define PB_SCL 0x00000020 /* PB 26 */
+#define PB_SDA 0x00000010 /* PB 27 */
+#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
+#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
+#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit) if (bit) \
+ immr->im_cpm.cp_pbdat |= PB_SDA; \
+ else \
+ immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit) if (bit) \
+ immr->im_cpm.cp_pbdat |= PB_SCL; \
+ else \
+ immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
#endif
/*
diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h
index dbad1fd..071b4be 100644
--- a/include/configs/HIDDEN_DRAGON.h
+++ b/include/configs/HIDDEN_DRAGON.h
@@ -169,12 +169,15 @@
* configuration items that the driver uses to drive the port pins.
*/
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
#error "Soft I2C is not configured properly. Please review!"
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
#define I2C_ACTIVE (iop->pdir |= 0x00010000)
#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
@@ -184,7 +187,7 @@
#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
else iop->pdat &= ~0x00020000
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h
index b58b6f6..ca8138b 100644
--- a/include/configs/ICU862.h
+++ b/include/configs/ICU862.h
@@ -106,12 +106,10 @@
#define CONFIG_DOS_PARTITION
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-# define CONFIG_SYS_I2C_SPEED 50000
-# define CONFIG_SYS_I2C_SLAVE 0xFE
-# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -133,6 +131,9 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+
/*
* Command line configuration.
diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
index 6d0937f..b5a8d37 100644
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -73,11 +73,10 @@
#define CONFIG_MISC_INIT_R 1
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
/*
* Software (bit-bang) I2C driver configuration
*/
diff --git a/include/configs/IP860.h b/include/configs/IP860.h
index 2379718..e5cc4e3 100644
--- a/include/configs/IP860.h
+++ b/include/configs/IP860.h
@@ -62,8 +62,10 @@
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -80,9 +82,6 @@
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
-# define CONFIG_SYS_I2C_SPEED 50000
-# define CONFIG_SYS_I2C_SLAVE 0xFE
# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM X24C16 */
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
/* mask of address bits that overflow into the "EEPROM chip address" */
diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h
index 6dd9812..b1fec10 100644
--- a/include/configs/IPHASE4539.h
+++ b/include/configs/IPHASE4539.h
@@ -110,15 +110,13 @@
* If the software driver is chosen, there are some additional
* configuration items that the driver uses to drive the port pins.
*/
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
/*
* Software (bit-bang) I2C driver configuration
*/
-#ifdef CONFIG_SOFT_I2C
#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
#define I2C_ACTIVE (iop->pdir |= 0x00010000)
#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
@@ -128,7 +126,6 @@
#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
else iop->pdat &= ~0x00020000
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
/*
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index 6ce789d..76509be 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -211,7 +211,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 8d5e8ff..5736fcf 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -134,7 +134,6 @@
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C hardware support */
-#undef CONFIG_SOFT_I2C /* I2C !bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed 400kHz */
#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index dae9b8c..d6f3a62 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -106,13 +106,11 @@
/*
* enable I2C and select the hardware/software driver
*/
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
-#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-
-#ifdef CONFIG_SOFT_I2C
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -128,7 +126,6 @@
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
/*-----------------------------------------------------------------------
* I2C Configuration
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index cceee96..2473749 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -114,13 +114,13 @@
/*
* enable I2C and select the hardware/software driver
*/
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
-#ifdef CONFIG_SOFT_I2C
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -136,7 +136,7 @@
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
/*-----------------------------------------------------------------------
diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h
index a1eaeff..209c122 100644
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -84,7 +84,6 @@
/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 80000
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x58000
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index e4dea05..b1bdac2 100644
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -147,7 +147,6 @@
/* I2c */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x58000
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index 733aece..dfc2ddf 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -101,7 +101,6 @@
/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 80000
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x00000300
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index a5913df..e8a8998 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -111,7 +111,6 @@
/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 80000
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x00000300
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 9c2a3bb..fbf0c9d 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -111,7 +111,6 @@
/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
-#undef CONFIG_SOFT_I2C
#define CONFIG_SYS_I2C_SPEED 80000
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x00000300
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
index 896d0d8..bedba2b 100644
--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -103,7 +103,6 @@
/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 80000
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x58000
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index 64f8302..06fa57c 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -97,7 +97,6 @@
/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 80000
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x58000
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index 4437bba..faa4f86 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -97,7 +97,6 @@
/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 80000
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x58000
diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h
index 3be2f8e..627c1ae 100644
--- a/include/configs/M54418TWR.h
+++ b/include/configs/M54418TWR.h
@@ -215,7 +215,7 @@
/* I2c */
#undef CONFIG_FSL_I2C
#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
/* I2C speed and slave address */
#define CONFIG_SYS_I2C_SPEED 80000
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
index 6552f69..5dbe0b4 100644
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -158,7 +158,6 @@
/* I2c */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x58000
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 536b755..8246e68 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -191,7 +191,6 @@
/* I2c */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x58000
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
index 3bdb867..6e9cba0 100644
--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -122,7 +122,6 @@
/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 80000
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x00008F00
diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h
index 3487e49..24f28e0 100644
--- a/include/configs/M5485EVB.h
+++ b/include/configs/M5485EVB.h
@@ -119,7 +119,6 @@
/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 80000
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x00008F00
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index d1ef559..66c4798 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -196,7 +196,6 @@
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C hardware support */
-#undef CONFIG_SOFT_I2C /* I2C !bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed 400kHz */
#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h
index 3ff36ad..fdd811d 100644
--- a/include/configs/MHPC.h
+++ b/include/configs/MHPC.h
@@ -73,8 +73,10 @@
#undef CONFIG_UCODE_PATCH
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -91,8 +93,6 @@
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0xFE
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM X24C04 */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
/* mask of address bits that overflow into the "EEPROM chip address" */
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index ac4c253..d32b14a 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -234,7 +234,6 @@
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_FSL_I2C
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 7c31f47..a35c6b6 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -327,7 +327,6 @@
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_FSL_I2C
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 212089c..7c3f35c 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -355,7 +355,6 @@
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_FSL_I2C
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 1130b59..c67ffdb 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -131,8 +131,6 @@
#define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */
#define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/
-#undef CONFIG_SOFT_I2C
-
#endif
/* Compact Flash */
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index a71ac2b..4d6486b 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -424,7 +424,6 @@
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_FSL_I2C
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index fcca542..29e7719 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -288,7 +288,6 @@
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_FSL_I2C
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 480468f..91c8a34 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -342,7 +342,6 @@
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_FSL_I2C
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index d5c9d05..3279e3c 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -368,7 +368,6 @@
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_FSL_I2C
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index cc2b7c3..f560b56 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -436,7 +436,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 6cb00ee..a42dec4 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -262,7 +262,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index d0e6ca6..13011b5 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -285,7 +285,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 09d0835..b00468e 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -234,7 +234,6 @@
/* I2C */
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index d070f6a..50e318c 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -360,8 +360,7 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CONFIG_SYS_I2C_OFFSET 0x3000
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 483556b..388ba9b 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -283,7 +283,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 525e88f..04f6a65 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -256,7 +256,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index f1bfdcb..05a69af 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -268,7 +268,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index c54755f..23bd908 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -304,7 +304,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 25303c4..45abcf6 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -433,7 +433,6 @@
/* I2C */
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index f791e76..0a2e39b 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -254,7 +254,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 4a3ca01..3ac5b2b 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -300,7 +300,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 7b28a27..ed1a429 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -491,7 +491,6 @@
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address*/
diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 4943d7c..f6ee251 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -315,7 +315,6 @@
/* I2C */
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x51
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 6ce4cbe..699e9eb 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -369,7 +369,6 @@
/* I2C */
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address*/
diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h
index 05a75d8..c8f5a85 100644
--- a/include/configs/P2020COME.h
+++ b/include/configs/P2020COME.h
@@ -227,7 +227,6 @@
/* I2C */
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address*/
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index faadfe4..5508313 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -57,10 +57,10 @@
"bootm"
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-# define CONFIG_SYS_I2C_SPEED 50000
-# define CONFIG_SYS_I2C_SLAVE 0xFE
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index f563fbe..3842f57 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -57,10 +57,10 @@
"bootm"
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-# define CONFIG_SYS_I2C_SPEED 50000
-# define CONFIG_SYS_I2C_SLAVE 0xFE
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 40c1827..4b53182 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -226,7 +226,6 @@
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h
index 60cccff..df16598 100644
--- a/include/configs/R360MPI.h
+++ b/include/configs/R360MPI.h
@@ -97,10 +97,13 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
#define CONFIG_HARD_I2C 1 /* To I2C with hardware support */
-#undef CONFIG_SORT_I2C /* To I2C with software support */
+#undef CONFIG_SYS_I2C_SOFT /* To I2C with software support */
#define CONFIG_SYS_I2C_SPEED 4700 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
+#if defined(CONFIG_SYS_I2C_SOFT)
+#define CONFIG_SYS_SYS_I2C_SOFT_SPEED 4700 /* I2C speed and slave address */
+#define CONFIG_SYS_SYS_I2C_SOFT_SLAVE 0x7F
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -116,6 +119,7 @@
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(50)
+#endif /* #define(CONFIG_SYS_I2C_SOFT) */
#define CONFIG_SYS_I2C_LCD_ADDR 0x8 /* LCD Control */
#define CONFIG_SYS_I2C_KEY_ADDR 0x9 /* Keyboard coprocessor */
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index 3595200..8130ee6 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -148,14 +148,16 @@
* I2C Configuration
*-----------------------------------------------------------------------------
*/
-#define CONFIG_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0x34
+#define CONFIG_SYS_I2C_SPEED 50000
+#define CONFIG_SYS_I2C_SLAVE 0x34
/* enable I2C and select the hardware/software driver */
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+
+#if defined(CONFIG_SYS_I2C_SOFT)
+#define CONFIG_SYS_I2C 1
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -170,8 +172,10 @@
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-# define CONFIG_SYS_I2C_SPEED 50000
-# define CONFIG_SYS_I2C_SLAVE 0x34
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x34
+#endif
+
# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM X24C16 */
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
/* mask of address bits that overflow into the "EEPROM chip address" */
diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h
index 563abea..9a385a4 100644
--- a/include/configs/RPXlite.h
+++ b/include/configs/RPXlite.h
@@ -62,6 +62,36 @@
#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */
+
+/* enable I2C and select the hardware/software driver */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 40000 /* 40 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
+/* Software (bit-bang) I2C driver configuration */
+#define PB_SCL 0x00000020 /* PB 26 */
+#define PB_SDA 0x00000010 /* PB 27 */
+
+#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
+#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
+#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit) if (bit) \
+ immr->im_cpm.cp_pbdat |= PB_SDA; \
+ else \
+ immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit) if (bit) \
+ immr->im_cpm.cp_pbdat |= PB_SCL; \
+ else \
+ immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+
+/* M41T11 Serial Access Timekeeper(R) SRAM */
+#define CONFIG_RTC_M41T11 1
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+/* play along with the linux driver */
+#define CONFIG_SYS_M41T11_BASE_YEAR 1900
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h
index e2ea016..b14136d 100644
--- a/include/configs/RRvision.h
+++ b/include/configs/RRvision.h
@@ -122,13 +122,10 @@
#endif
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C /* I2C bit-banged */
-
-# define CONFIG_SYS_I2C_SPEED 50000 /* 50 kHz is supposed to work */
-# define CONFIG_SYS_I2C_SLAVE 0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -144,7 +141,6 @@
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(1) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
/*
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index b7fbe5e..f0ce282 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -121,7 +121,10 @@
#define CONFIG_RTC_DS1306 /* Dallas 1306 real time clock */
-#define CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -138,8 +141,6 @@
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-# define CONFIG_SYS_I2C_SPEED 50000
-# define CONFIG_SYS_I2C_SLAVE 0xFE
# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Atmel 24C64 */
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* two byte address */
diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index fa456ed..65ca425 100644
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -202,13 +202,16 @@
* If the software driver is chosen, there are some additional
* configuration items that the driver uses to drive the port pins.
*/
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_HARD_I2C 1 /* To enable I2C support */
+#undef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SPEED 400000
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
#error "Soft I2C is not configured properly. Please review!"
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
#define I2C_ACTIVE (iop->pdir |= 0x00010000)
#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
@@ -218,7 +221,7 @@
#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
else iop->pdat &= ~0x00020000
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index cdc51a5..9a69374 100644
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -172,13 +172,16 @@
* If the software driver is chosen, there are some additional
* configuration items that the driver uses to drive the port pins.
*/
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_HARD_I2C 1 /* To enable I2C support */
+#undef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SPEED 400000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
#error "Soft I2C is not configured properly. Please review!"
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
#define I2C_ACTIVE (iop->pdir |= 0x00010000)
#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
@@ -188,7 +191,7 @@
#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
else iop->pdat &= ~0x00020000
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index d95a226..059fb36 100644
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -136,19 +136,11 @@
/*-----------------------------------------------------------------------
* I2C
*/
-#define CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC32 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
-/* mask of address bits that overflow into the "EEPROM chip address" */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x01
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */
- /* 32 byte page write mode using*/
- /* last 5 bits of the address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
-#if defined (CONFIG_SOFT_I2C)
#if 0 /* push-pull */
#define SDA 0x00800000
#define SCL 0x00000008
@@ -182,8 +174,18 @@
#define I2C_ACTIVE {DIR1|=SDA;}
#define I2C_TRISTATE {DIR1&=~SDA;}
#endif
-#endif
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC32 */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x01
+/*
+ * The Catalyst CAT24WC32 has 32 byte page write mode using
+ * last 5 bits of the address
+ */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h
index 623cb66..af88773 100644
--- a/include/configs/TK885D.h
+++ b/include/configs/TK885D.h
@@ -104,13 +104,10 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-
-#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -126,7 +123,6 @@
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C?? */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* two byte address */
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 2267d59..e9dcefc 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -200,10 +200,13 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_MISC_INIT_R
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C with softwate support */
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#if defined (CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
+# define CONFIG_SYS_I2C
+# define CONFIG_SYS_I2C_SOFT_SPEED 100000
+# define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
+/**/
# define SDA0 0x40
# define SCL0 0x80
# define GPIOE0 *((volatile uchar*)(CONFIG_SYS_MBAR+0x0c00))
@@ -218,8 +221,7 @@
# define I2C_DELAY {udelay(5);}
# define I2C_ACTIVE {DDR0|=SDA0;}
# define I2C_TRISTATE {DDR0&=~SDA0;}
-# define CONFIG_SYS_I2C_SPEED 100000
-# define CONFIG_SYS_I2C_SLAVE 0x7F
+
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
#define CONFIG_SYS_I2C_FACT_ADDR 0x57
#endif
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index 4849f94..1f728e3 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -159,7 +159,6 @@
* Environment handler
* only the first 6k in EEPROM are available for user. Of that we use 256b
*/
-#define CONFIG_SOFT_I2C
#define CONFIG_ENV_IS_IN_EEPROM 1 /* turn on EEPROM env feature */
#define CONFIG_ENV_OFFSET 0x1000
#define CONFIG_ENV_SIZE 0x0700
@@ -170,13 +169,15 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_EEPROM_SIZE 0x2000
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0xFE
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12
#define CONFIG_ENV_OVERWRITE
#define CONFIG_MISC_INIT_R
-#if defined (CONFIG_SOFT_I2C)
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
+/**/
#define SDA 0x00010
#define SCL 0x00020
#define __I2C_DIR immr->im_cpm.cp_pbdir
@@ -193,7 +194,6 @@
#define I2C_DELAY { udelay(5); }
#define I2C_ACTIVE { __I2C_DIR |= SDA; }
#define I2C_TRISTATE { __I2C_DIR &= ~SDA; }
-#endif
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
index 7e24131..5fbfd1c9 100644
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -89,10 +89,10 @@
#define CONFIG_BOOTCOMMAND "run flash_self"
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
/*
* Software (bit-bang) I2C driver configuration
diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index 3b3f9e6..c27e4ef 100644
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -97,11 +97,10 @@
#if CONFIG_I2C
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -135,8 +134,9 @@
#define CONFIG_SYS_DTT_HYSTERESIS 3
#else
+#undef CONFIG_SYS_I2C
#undef CONFIG_HARD_I2C
-#undef CONFIG_SOFT_I2C
+#undef CONFIG_SYS_I2C_SOFT
#endif
/*
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 966a6e3..f22eb35 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -188,7 +188,6 @@
* I2C
*/
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_FSL_I2C
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed: 400KHz */
#define CONFIG_SYS_I2C_SLAVE 0x7F /* slave address */
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index e7fd2db..1b558fc 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -93,13 +93,10 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-
-#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -115,7 +112,6 @@
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C64 */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* two byte address */
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index 7d0ae99..9104971 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -107,13 +107,11 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
-#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-
-#ifdef CONFIG_SOFT_I2C
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -129,7 +127,6 @@
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C256 */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* two byte address */
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index 7941631..65d7c58 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -101,13 +101,10 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-
-#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -123,7 +120,6 @@
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C?? */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* two byte address */
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index d93d5e2..9f32a60 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -122,7 +122,6 @@
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/aria.h b/include/configs/aria.h
index bd81053..261dc69 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -371,7 +371,6 @@
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */
#define CONFIG_I2C_MULTI_BUS
/* I2C speed and slave address */
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index a0ed8f1..6dabe57 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -118,7 +118,6 @@
/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 80000
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x58000
diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h
index c1a5ecd..beab127 100644
--- a/include/configs/bf533-ezkit.h
+++ b/include/configs/bf533-ezkit.h
@@ -94,10 +94,15 @@
/*
* I2C Settings
*/
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C_SOFT
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
-
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+#endif
/*
* Misc Settings
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index e3344e9..7144c63 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -14,7 +14,6 @@
#define CONFIG_BFIN_CPU bf533-0.3
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
-
/*
* Clock Settings
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -38,7 +37,6 @@
/* Values can range from 1-15 */
#define CONFIG_SCLK_DIV 6 /* note: 1.2 boards can go faster */
-
/*
* Memory Settings
*/
@@ -74,6 +72,42 @@
/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PF_SCL PF3
+#define PF_SDA PF2
+#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;")
+#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); \
+ *pFIO_INEN &= ~PF_SDA; asm("ssync;")
+#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); \
+ *pFIO_INEN |= PF_SDA; asm("ssync;")
+#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); \
+ asm("ssync;")
+#define I2C_SDA(bit) if (bit) { \
+ *pFIO_FLAG_S = PF_SDA; \
+ asm("ssync;"); \
+ } \
+ else { \
+ *pFIO_FLAG_C = PF_SDA; \
+ asm("ssync;"); \
+ }
+#define I2C_SCL(bit) if (bit) { \
+ *pFIO_FLAG_S = PF_SCL; \
+ asm("ssync;"); \
+ } \
+ else { \
+ *pFIO_FLAG_C = PF_SCL; \
+ asm("ssync;"); \
+ }
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+
+
/*
* Flash Settings
*/
@@ -84,7 +118,6 @@
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 67
-
/*
* SPI Settings
*/
@@ -132,10 +165,15 @@
/*
* I2C Settings
*/
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C_SOFT
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF3
#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF2
-
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0
+#endif
/*
* Compact Flash / IDE / ATA Settings
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 6ee1e4c..404039a 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -88,10 +88,14 @@
/*
* I2C Settings
*/
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C_SOFT
+#ifdef CONFIG_SYS_I2C_SOFT
#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
-
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0
+#endif
/*
* Misc Settings
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index e1a6fe3..08ccce0 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -71,7 +71,7 @@
# ifdef CONFIG_SPI_FLASH
# define CONFIG_CMD_SF
# endif
-# if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+# if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
# define CONFIG_CMD_I2C
# define CONFIG_SOFT_I2C_READ_REPEATED_START
# endif
@@ -299,7 +299,7 @@
/*
* I2C Settings
*/
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
# ifndef CONFIG_SYS_I2C_SPEED
# define CONFIG_SYS_I2C_SPEED 50000
# endif
diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h
index 83ad659..7d82275 100644
--- a/include/configs/blackstamp.h
+++ b/include/configs/blackstamp.h
@@ -40,7 +40,6 @@
#define SHARED_RESOURCES 1
/* Is I2C bit-banged? */
-#undef CONFIG_SOFT_I2
/*
* Clock Settings
@@ -115,7 +114,7 @@
# undef CONFIG_CMD_NET
#endif
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
# define CONFIG_CMD_I2C
#endif
@@ -204,11 +203,11 @@
* Note these pins are arbitrarily chosen because we aren't using
* them yet. You can (and probably should) change these values!
*/
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF9
#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF8
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0xFE
+#define CONFIG_SYS_SOFT_I2C_SPEED 50000
+#define CONFIG_SYS_SOFT_I2C_SLAVE 0xFE
#endif
/*
diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h
index 523c4e4..cd37f9a 100644
--- a/include/configs/blackvme.h
+++ b/include/configs/blackvme.h
@@ -224,7 +224,7 @@
* Soft I2C settings (BF561 does not have hard I2C)
* PF12,13 on SPI connector 0.
*/
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
# define CONFIG_CMD_I2C
# define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF12
# define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF13
diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index 15d56c3..d9b006a 100644
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -92,7 +92,6 @@
#define CONFIG_USART_ID 0/* ignored in arm */
#undef CONFIG_HARD_I2C
-#undef CONFIG_SOFT_I2C
#define AT91_PIN_SDA (1<<25)
#define AT91_PIN_SCL (1<<26)
@@ -139,7 +138,7 @@
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_DHCP
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#endif
diff --git a/include/configs/debris.h b/include/configs/debris.h
index c40fbd9..0d3a4fa 100644
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -273,12 +273,15 @@
* configuration items that the driver uses to drive the port pins.
*/
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
#error "Soft I2C is not configured properly. Please review!"
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
#define I2C_ACTIVE (iop->pdir |= 0x00010000)
#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
@@ -288,7 +291,7 @@
#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
else iop->pdat &= ~0x00020000
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index a6a0f8b..b80ab3f 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -224,7 +224,7 @@
* configuration items that the driver uses to drive the port pins.
*/
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 3be4929..efb50e3 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -223,11 +223,10 @@
* I2C-Bus
*/
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
-
-#ifndef CONFIG_HARD_I2C
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0
/* Software I2C driver configuration */
@@ -251,9 +250,7 @@
else \
writel(ATMEL_PMX_AA_TWCK, &pio->pioa.codr);
-#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED)
-
-#endif /* CONFIG_HARD_I2C */
+#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SOFT_SPEED)
/* I2C-RTC */
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 5a87cc5..2e675bc 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -227,15 +227,18 @@
* If the software driver is chosen, there are some additional
* configuration items that the driver uses to drive the port pins.
*/
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SLAVE 0x7F /* This is for HARD, must go */
/*
* Software (bit-bang) I2C driver configuration
*/
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
#define I2C_ACTIVE (iop->pdir |= 0x00010000)
#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
@@ -245,7 +248,7 @@
#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
else iop->pdat &= ~0x00020000
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
/* #define CONFIG_RTC_DS174x */
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 14a0f02..5bf8c22 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -210,10 +210,12 @@
/* I2C */
#define CONFIG_SYS_MAX_I2C_BUS 1
-#define CONFIG_SYS_I2C_SLAVE 0
-#define CONFIG_SYS_I2C_SPEED 100000
+
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0
-#define CONFIG_SOFT_I2C
#define I2C_SOFT_DECLARATIONS
#define GPIO_I2C_SCL AT91_PIO_PORTA, 24
diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h
index 294af73..5291755 100644
--- a/include/configs/ibf-dsp561.h
+++ b/include/configs/ibf-dsp561.h
@@ -105,11 +105,11 @@
/*
* I2C Settings
*/
-#define CONFIG_SOFT_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
-
/*
* Misc Settings
*/
diff --git a/include/configs/iocon.h b/include/configs/iocon.h
index 7f8825b..695aa5c 100644
--- a/include/configs/iocon.h
+++ b/include/configs/iocon.h
@@ -110,11 +110,11 @@
/*
* I2C stuff
*/
-#define CONFIG_SYS_I2C_SPEED 400000
-
-/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+#undef CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index 3b15c4e..6182e81 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -78,10 +78,7 @@
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS 1
#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MUX
/* Support the IVM EEprom */
#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h
index eb0e5b6..5a430ed 100644
--- a/include/configs/km/km83xx-common.h
+++ b/include/configs/km/km83xx-common.h
@@ -209,6 +209,9 @@
#define CONFIG_SYS_I2C_SPEED 200000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x3000
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS 1
+#define CONFIG_I2C_MUX
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
#define CONFIG_DTT_LM75 /* ON Semi's LM75 */
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 766d76e..c2c67c1 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -58,7 +58,6 @@
#define CONFIG_CMD_NAND
#define CONFIG_CMD_SF
-#define CONFIG_SOFT_I2C /* I2C bit-banged */
/* SPI NOR Flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_SPEED 8100000
@@ -187,8 +186,23 @@
/*
* I2C related stuff
*/
+#undef CONFIG_I2C_MVTWSI
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+
#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
+
+#define CONFIG_SYS_NUM_I2C_BUSES 6
+#define CONFIG_SYS_I2C_MAX_HOPS 1
+#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
+ }
+
#ifndef __ASSEMBLY__
#include <asm/arch-kirkwood/gpio.h>
extern void __set_direction(unsigned pin, int high);
@@ -211,6 +225,8 @@
#define I2C_DELAY udelay(1)
#define I2C_SOFT_DECLARATIONS
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x0
+#define CONFIG_SYS_I2C_SOFT_SPEED 100000
#endif
/* EEprom support 24C128, 24C256 valid for environment eeprom */
@@ -240,7 +256,7 @@
#define CONFIG_SYS_EEPROM_WREN
#define CONFIG_ENV_OFFSET 0x0 /* no bracets! */
#define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET)
-#define CONFIG_I2C_ENV_EEPROM_BUS KM_ENV_BUS "\0"
+#define CONFIG_I2C_ENV_EEPROM_BUS KM_ENV_BUS
#define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
#endif
@@ -293,7 +309,7 @@
CONFIG_KM_DEF_ENV \
CONFIG_KM_NEW_ENV \
"arch=arm\0" \
- "EEprom_ivm=" KM_IVM_BUS "\0" \
+ "EEprom_ivm=" __stringify(KM_IVM_BUS) "\0" \
""
#if defined(CONFIG_SYS_NO_FLASH)
diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h
index 3c2117f..54041f3 100644
--- a/include/configs/km82xx.h
+++ b/include/configs/km82xx.h
@@ -212,7 +212,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_KM_BOARD_EXTRA_ENV \
CONFIG_KM_DEF_ENV \
- "EEprom_ivm=pca9544a:70:4 \0" \
+ "EEprom_ivm=1\0" \
"unlock=yes\0" \
"newenv=" \
"prot off 0xFE0C0000 +0x40000 && " \
@@ -242,10 +242,16 @@
#endif /* CONFIG_ENV_IS_IN_FLASH */
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_NUM_I2C_BUSES 3
+#define CONFIG_SYS_I2C_MAX_HOPS 1
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SOFT_SPEED
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
+#define CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP} }, \
+ {0, {{I2C_MUX_PCA9542, 0x70, 0} } }, \
+ {0, {{I2C_MUX_PCA9542, 0x70, 1} } } }
/*
* Software (bit-bang) I2C driver configuration
@@ -282,7 +288,7 @@
#define CONFIG_SYS_DTT_MAX_TEMP 70
#define CONFIG_SYS_DTT_LOW_TEMP -30
#define CONFIG_SYS_DTT_HYSTERESIS 3
-#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS)
+#define CONFIG_SYS_DTT_BUS_NUM 2
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
index 83bb7aa..a0ad47e 100644
--- a/include/configs/km_kirkwood.h
+++ b/include/configs/km_kirkwood.h
@@ -42,18 +42,18 @@
#define CONFIG_IDENT_STRING "\nKeymile Kirkwood"
#define CONFIG_HOSTNAME km_kirkwood
#define CONFIG_KM_DISABLE_PCIE
-#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
+#define KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
/* KM_KIRKWOOD_PCI */
#elif defined(CONFIG_KM_KIRKWOOD_PCI)
#define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI"
#define CONFIG_HOSTNAME km_kirkwood_pci
-#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
+#define KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_FPGA_CONFIG
/* KM_NUSA */
#elif defined(CONFIG_KM_NUSA)
-#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
+#define KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_IDENT_STRING "\nKeymile NUSA"
#define CONFIG_HOSTNAME kmnusa
#undef CONFIG_SYS_KWD_CONFIG
@@ -69,7 +69,7 @@
#elif defined(CONFIG_KM_MGCOGE3UN)
#define CONFIG_IDENT_STRING "\nKeymile COGE3UN"
#define CONFIG_HOSTNAME mgcoge3un
-#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
+#define KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG \
$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
@@ -81,7 +81,7 @@
/* KMCOGE5UN */
#elif defined(CONFIG_KM_COGE5UN)
#define CONFIG_IDENT_STRING "\nKeymile COGE5UN"
-#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
+#define KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG \
$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
@@ -95,12 +95,12 @@
#elif defined(CONFIG_KM_PORTL2)
#define CONFIG_IDENT_STRING "\nKeymile Port-L2"
#define CONFIG_HOSTNAME portl2
-#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
+#define KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_PIGGY4_88E6061
/* KM_SUV31 */
#elif defined(CONFIG_KM_SUV31)
-#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
+#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_IDENT_STRING "\nKeymile SUV31"
#define CONFIG_HOSTNAME kmsuv31
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
@@ -114,7 +114,7 @@
#include "km/km_arm.h"
#ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR
-#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
+#define KM_ENV_BUS 5 /* I2C2 (Mux-Port 5)*/
#endif
#if defined(CONFIG_KM_PIGGY4_88E6352)
diff --git a/include/configs/korat.h b/include/configs/korat.h
index d7c1f85..eea8c98 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -156,7 +156,6 @@
* I2C
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 3c02b73..dc0bd33 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -146,13 +146,10 @@
#undef CONFIG_STATUS_LED /* Status LED disabled */
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-
-#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -168,7 +165,6 @@
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index ba613e3..4dcb25a 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -299,7 +299,6 @@
* I2C
*/
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index c4f245b..6f73e5d 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -267,7 +267,6 @@
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */
#define CONFIG_SYS_I2C_SLAVE 0x7F /* slave address */
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 6f003aa..65ca62f 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -360,7 +360,6 @@
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
index d438efd..09073e9 100644
--- a/include/configs/nhk8815.h
+++ b/include/configs/nhk8815.h
@@ -109,8 +109,11 @@
#ifndef __ASSEMBLY__
#include <asm/arch/gpio.h>
#define CONFIG_CMD_I2C
-#define CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED 400000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT 1 /* I2C bit-banged */
+#define I2C_SOFT_DEFS
+#define CONFIG_SYS_I2C_SOFT_SPEED 400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
#define __SDA 63
#define __SCL 62
#define I2C_SDA(x) nmk_gpio_set(__SDA, x)
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index fe4f3c0..010e1b9 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -115,14 +115,13 @@
/* RTC and I2C stuff */
#define CONFIG_RTC_DS1338
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-#undef CONFIG_HARD_I2C
-#define CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-#ifdef CONFIG_SOFT_I2C
-# define CONFIG_I2C_CMD_TREE
-# define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SOFT_SPEED 100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
+
/* Configure data and clock pins for pio */
# define I2C_INIT { \
at91_set_pio_output(AT91_PIO_PORTB, 4, 0); \
@@ -140,7 +139,7 @@
/* Set clock pin */
# define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTB, 5, bit)
# define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
/*
* BOOTP options
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 2fa5372..d0a6b17 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -536,7 +536,6 @@
/* I2C */
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C spd and slave address */
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index a19de07..3c33da7 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -98,7 +98,6 @@
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 1897619..6358104 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -140,7 +140,6 @@
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index 1e07317..9aa112a 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -281,12 +281,10 @@
*/
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-
-#define CONFIG_SYS_I2C_SPEED 83000 /* 83 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 83000 /* 83 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index 5f1bb58..30a8c55 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -153,7 +153,6 @@
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 56e8347..89ae32b 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -226,8 +226,10 @@
#define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get_nr(j4, 3)
#define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get_nr(j4, 0)
-#define CONFIG_SOFT_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS 7
#define CONFIG_USB_GADGET
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index eb13bb3..f7266aa 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -250,9 +250,11 @@
#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part1_get_nr(b, 7)
#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part1_get_nr(b, 6)
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0
#define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_SYS_I2C_SPEED 50000
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS 7
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index 54d55a0..efbf6b6 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -296,15 +296,13 @@
* If the software driver is chosen, there are some additional
* configuration items that the driver uses to drive the port pins.
*/
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
/*
* Software (bit-bang) I2C driver configuration
*/
-#ifdef CONFIG_SOFT_I2C
#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
#define I2C_ACTIVE (iop->pdir |= 0x00010000)
#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
@@ -314,7 +312,6 @@
#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
else iop->pdat &= ~0x00020000
#define I2C_DELAY udelay(20) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
/* Define this to reserve an entire FLASH sector for
* environment variables. Otherwise, the environment will be
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index 6e53bc2..4120cf4 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -169,7 +169,6 @@
#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index fdc1b95..7a79e8c 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -305,7 +305,6 @@
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_FSL_I2C
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 148ade3..354691a 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -446,7 +446,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 0e2d17d..147e0ae 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -291,7 +291,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 9dec21d..59636f7 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -247,7 +247,6 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define I2C_INIT
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 218ca54..c683fab 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -106,11 +106,11 @@
#define CONFIG_SYS_PROMPT "Snapper> "
/* I2C - Bit-bashed */
-#define CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
#define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_I2C_MULTI_BUS
#define I2C_INIT do { \
at91_set_gpio_output(AT91_PIN_PA23, 1); \
at91_set_gpio_output(AT91_PIN_PA24, 1); \
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 7a0b481..19869e6 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -237,7 +237,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 102124 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x3000
diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
index 87878d5..2a9b00c 100644
--- a/include/configs/spc1920.h
+++ b/include/configs/spc1920.h
@@ -207,13 +207,10 @@
*/
#if defined(CONFIG_CMD_I2C)
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-
-#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -229,7 +226,6 @@
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
#endif
/*-----------------------------------------------------------------------
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index 939a964e..b688b45 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -180,7 +180,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#if 0
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 96d7128..4c3c086 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -200,7 +200,6 @@
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#undef CONFIG_SYS_I2C_NOPROBES
diff --git a/include/configs/top9000.h b/include/configs/top9000.h
index 7cc6577..884670d 100644
--- a/include/configs/top9000.h
+++ b/include/configs/top9000.h
@@ -201,11 +201,12 @@
#define CONFIG_CMD_USB
/* I2C support must always be enabled */
-#define CONFIG_SOFT_I2C
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
+
#define I2C0_PORT AT91_PIO_PORTA
#define SDA0_PIN 23
#define SCL0_PIN 24
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 356d87b..926b209 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -275,10 +275,12 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_CACHELINE_SIZE 32
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
#define CONFIG_SOFT_I2C_READ_REPEATED_START
#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED 50000
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SOFT_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS 15
diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h
index 1bb6128..218feeb 100644
--- a/include/configs/u8500_href.h
+++ b/include/configs/u8500_href.h
@@ -166,7 +166,6 @@
*/
#define CONFIG_U8500_I2C
#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_I2C_SLAVE 0 /* slave addr of controller */
diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index 450c98b..ce122b4 100644
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -464,13 +464,10 @@
*/
/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-
-#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -486,7 +483,6 @@
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
/*-----------------------------------------------------------------------
* I2C EEPROM (24C164)
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 60d1503..4815664 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -235,8 +235,7 @@
*------------------------------------------------------------------*/
#if 1
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 0x7F
#endif
diff --git a/include/configs/vct.h b/include/configs/vct.h
index 7aeb6680..fbdb728 100644
--- a/include/configs/vct.h
+++ b/include/configs/vct.h
@@ -245,11 +245,10 @@
/*
* I2C/EEPROM
*/
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C /* I2C bit-banged */
-
-#define CONFIG_SYS_I2C_SPEED 83000 /* 83 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE 0x7f
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 83000 /* 83 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7f
/*
* Software (bit-bang) I2C driver configuration
@@ -337,7 +336,7 @@
#undef CONFIG_CMD_USB
#undef CONFIG_SMC911X
-#undef CONFIG_SOFT_I2C
+#undef CONFIG_SYS_I2C_SOFT
#undef CONFIG_SOURCE
#undef CONFIG_SYS_LONGHELP
#undef CONFIG_TIMESTAMP
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
index e2cf4f0..5c43c1b 100644
--- a/include/configs/vl_ma2sc.h
+++ b/include/configs/vl_ma2sc.h
@@ -147,10 +147,12 @@
#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
#ifndef CONFIG_HARD_I2C
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SOFT_SLAVE CONFIG_SYS_I2C_SLAVE
/* Software I2C driver configuration */
-
#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED)
#define AT91_PIN_SDA (1<<4) /* AT91C_PIO_PB4 */
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index f97de54..54fbe8b 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -239,7 +239,6 @@
/* I2C */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_FSL_I2C
#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index b0c3bd5..75195bc 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -169,7 +169,6 @@
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/i2c.h b/include/i2c.h
index 3e09af9..f532a14 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -305,6 +305,15 @@
* Adjusts I2C pointers after U-Boot is relocated to DRAM
*/
void i2c_reloc_fixup(void);
+#if defined(CONFIG_SYS_I2C_SOFT)
+void i2c_soft_init(void);
+void i2c_soft_active(void);
+void i2c_soft_tristate(void);
+int i2c_soft_read(void);
+void i2c_soft_sda(int bit);
+void i2c_soft_scl(int bit);
+void i2c_soft_delay(void);
+#endif
#else
/*