x86: Enable PCIe controller on quark/galileo
Quark SoC holds the PCIe controller in reset following a power on.
U-Boot needs to release the PCIe controller from reset. The PCIe
controller (D23:F0/F1) will not be visible in PCI configuration
space and any access to its PCI configuration registers will cause
system hang while it is held in reset.
Enable PCIe controller per Quark firmware writer guide.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/x86/include/asm/arch-quark/quark.h b/arch/x86/include/asm/arch-quark/quark.h
index 1ce5693..aad7fbe 100644
--- a/arch/x86/include/asm/arch-quark/quark.h
+++ b/arch/x86/include/asm/arch-quark/quark.h
@@ -12,6 +12,7 @@
#define MSG_PORT_HOST_BRIDGE 0x03
#define MSG_PORT_RMU 0x04
#define MSG_PORT_MEM_MGR 0x05
+#define MSG_PORT_PCIE_AFE 0x16
#define MSG_PORT_SOC_UNIT 0x31
/* Port 0x00: Memory Arbiter Message Port Registers */
@@ -48,6 +49,21 @@
#define ESRAM_BLK_CTRL 0x82
#define ESRAM_BLOCK_MODE 0x10000000
+/* Port 0x16: PCIe AFE Unit Port Registers */
+
+#define PCIE_RXPICTRL0_L0 0x2080
+#define PCIE_RXPICTRL0_L1 0x2180
+
+/* Port 0x31: SoC Unit Port Registers */
+
+/* PCIe Controller Config */
+#define PCIE_CFG 0x36
+#define PCIE_CTLR_PRI_RST 0x00010000
+#define PCIE_PHY_SB_RST 0x00020000
+#define PCIE_CTLR_SB_RST 0x00040000
+#define PCIE_PHY_LANE_RST 0x00090000
+#define PCIE_CTLR_MAIN_RST 0x00100000
+
/* DRAM */
#define DRAM_BASE 0x00000000
#define DRAM_MAX_SIZE 0x80000000
@@ -124,6 +140,32 @@
outl(value, PCI_REG_DATA);
}
+/**
+ * board_assert_perst() - Assert the PERST# pin
+ *
+ * The CPU interface to the PERST# signal on Quark is platform dependent.
+ * Board-specific codes need supply this routine to assert PCIe slot reset.
+ *
+ * The tricky part in this routine is that any APIs that may trigger PCI
+ * enumeration process are strictly forbidden, as any access to PCIe root
+ * port's configuration registers will cause system hang while it is held
+ * in reset.
+ */
+void board_assert_perst(void);
+
+/**
+ * board_deassert_perst() - De-assert the PERST# pin
+ *
+ * The CPU interface to the PERST# signal on Quark is platform dependent.
+ * Board-specific codes need supply this routine to de-assert PCIe slot reset.
+ *
+ * The tricky part in this routine is that any APIs that may trigger PCI
+ * enumeration process are strictly forbidden, as any access to PCIe root
+ * port's configuration registers will cause system hang while it is held
+ * in reset.
+ */
+void board_deassert_perst(void);
+
#endif /* __ASSEMBLY__ */
#endif /* _QUARK_H_ */