Updates for MCC200 / PRS200 boards:
- support for configurations with SDRAM or DDR memory,
- support for highboot and lowboot
- adjusting environment definitions
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index 563f797..aead49a 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -55,16 +55,28 @@
*
* CONFIG_PSC_CONSOLE must be undefined in this case.
*/
+#if !defined(CONFIG_PRS200)
+/* MCC200 configuration: */
#ifdef CONFIG_CONSOLE_COM12
#define CONFIG_QUART_CONSOLE 6 /* console is on UARTF of QUART2 */
#else
#define CONFIG_QUART_CONSOLE 8 /* console is on UARTH of QUART2 */
#endif
+#else
+/* PRS200 configuration: */
+#undef CONFIG_QUART_CONSOLE
+#endif /* CONFIG_PRS200 */
/*
* To select console on PSC1, define CONFIG_PSC_CONSOLE as 1
* and undefine CONFIG_QUART_CONSOLE.
*/
-/*#define CONFIG_PSC_CONSOLE 1 */ /* console is on PSC1 */
+#if !defined(CONFIG_PRS200)
+/* MCC200 configuration: */
+#undef CONFIG_PSC_CONSOLE
+#else
+/* PRS200 configuration: */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#endif
#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE)
#error "Select only one console device!"
#endif
@@ -103,33 +115,44 @@
#undef CONFIG_BOOTARGS
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#ifdef CONFIG_PRS200
+# define CFG__BOARDNAME "prs200"
+#else
+# define CFG__BOARDNAME "mcc200"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "hostname=mcc200\0" \
+ "hostname=" CFG__BOARDNAME "\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
- "flash_nfs=run nfsargs addip;" \
+ "addcons=etenv bootargs ${bootargs} " \
+ "console=${console},${baudrate}\0" \
+ "flash_nfs=run nfsargs addip addcons;" \
"bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip;" \
+ "flash_self=run ramargs addip addcons;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
+ "net_nfs=tftp 200000 ${bootfile};" \
+ "run nfsargs addip addcons;bootm\0" \
+ "console=ttyS0\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
- "bootfile=/tftpboot/mcc200/uImage\0" \
- "baudrate=115200\0" \
- "load=tftp 200000 /tftpboot/mcc200/u-boot.bin\0" \
- "update=protect off FFF00000 +${filesize};" \
- "era FFF00000 +${filesize};" \
- "cp.b 200000 FFF00000 ${filesize}\0" \
- "serverip=192.168.1.1\0" \
- "ipaddr=192.168.133.144\0" \
- "netmask=255.255.0.0\0" \
+ "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \
+ "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \
+ "text_base=" MK_STR(TEXT_BASE) "\0" \
+ "update=protect off ${text_base} +${filesize};" \
+ "era ${text_base} +${filesize};" \
+ "cp.b 200000 ${text_base} ${filesize}\0" \
"unlock=yes\0" \
- "ethaddr=00:02:44:7D:73:3B\0" \
""
+#undef MK_STR
+#undef XMK_STR
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -314,7 +337,7 @@
* One of four SC16C554 UARTs is selected with
* A3-A4 (DA5-DA6) lines.
*/
-#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5)
+#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) && !defined(CONFIG_PRS200)
#define CFG_NS16550_COM1 (CFG_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5)
#elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9)
#define CFG_NS16550_COM1 (CFG_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5)