ARM: keystone2: add K2E SoC hardware definitions
This patch adds hardware definitions specific to Keystone II
K2E device. It has a lot common definitions with k2hk SoC, so
move them to common hardware.h. This is preparation patch for
adding K2E SoC support.
Acked-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hao Zhang <hzhang@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
index 133edad..9c86b69 100644
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -69,6 +69,11 @@
#define NOSRA_MASK 0x08000000
#define ECC_MASK 0x00000001
+/* DDR3 definitions */
+#define KS2_DDR3A_EMIF_CTRL_BASE 0x21010000
+#define KS2_DDR3A_EMIF_DATA_BASE 0x80000000
+#define KS2_DDR3A_DDRPHYC 0x02329000
+
#define KS2_DDR3_MIDR_OFFSET 0x00
#define KS2_DDR3_STATUS_OFFSET 0x04
#define KS2_DDR3_SDCFG_OFFSET 0x08
@@ -85,12 +90,46 @@
#define KS2_UART0_BASE 0x02530c00
#define KS2_UART1_BASE 0x02531000
+/* Boot Config */
+#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000
+#define KS2_JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18)
+#define KS2_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20)
+
/* PSC */
#define KS2_PSC_BASE 0x02350000
#define KS2_LPSC_GEM_0 15
#define KS2_LPSC_TETRIS 52
#define KS2_TETRIS_PWR_DOMAIN 31
+/* Chip configuration unlock codes and registers */
+#define KS2_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38)
+#define KS2_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c)
+#define KS2_KICK0_MAGIC 0x83e70b13
+#define KS2_KICK1_MAGIC 0x95a4f1e0
+
+/* PLL control registers */
+#define KS2_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350)
+#define KS2_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354)
+#define KS2_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358)
+#define KS2_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C)
+#define KS2_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360)
+#define KS2_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364)
+#define KS2_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370)
+#define KS2_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374)
+
+#define KS2_PLL_CNTRL_BASE 0x02310000
+#define KS2_CLOCK_BASE KS2_PLL_CNTRL_BASE
+#define KS2_RSTCTRL (KS2_PLL_CNTRL_BASE + 0xe8)
+#define KS2_RSTCTRL_KEY 0x5a69
+#define KS2_RSTCTRL_MASK 0xffff0000
+#define KS2_RSTCTRL_SWRST 0xfffe0000
+
+/* SPI */
+#define KS2_SPI0_BASE 0x21000400
+#define KS2_SPI1_BASE 0x21000600
+#define KS2_SPI2_BASE 0x21000800
+#define KS2_SPI_BASE KS2_SPI0_BASE
+
/* AEMIF */
#define KS2_AEMIF_CNTRL_BASE 0x21000a00
#define DAVINCI_ASYNC_EMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE
@@ -98,10 +137,24 @@
/* Flag from ks2_debug options to check if DSPs need to stay ON */
#define DBG_LEAVE_DSPS_ON 0x1
+/* Queue manager */
+#define KS2_QM_MANAGER_BASE 0x02a02000
+#define KS2_QM_DESC_SETUP_BASE 0x02a03000
+#define KS2_QM_MANAGER_QUEUES_BASEi 0x02a80000
+#define KS2_QM_MANAGER_Q_PROXY_BASE 0x02ac0000
+#define KS2_QM_QUEUE_STATUS_BASE 0x02a40000
+
+/* MSMC control */
+#define KS2_MSMC_CTRL_BASE 0x0bc00000
+
#ifdef CONFIG_SOC_K2HK
#include <asm/arch/hardware-k2hk.h>
#endif
+#ifdef CONFIG_SOC_K2E
+#include <asm/arch/hardware-k2e.h>
+#endif
+
#ifndef __ASSEMBLY__
static inline int cpu_is_k2hk(void)
{
@@ -111,6 +164,14 @@
return (part_no == 0xb981) ? 1 : 0;
}
+static inline int cpu_is_k2e(void)
+{
+ unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG);
+ unsigned int part_no = (jtag_id >> 12) & 0xffff;
+
+ return (part_no == 0xb9a6) ? 1 : 0;
+}
+
static inline int cpu_revision(void)
{
unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG);