sh: Add support for ecovec board
The ecovec board has SH7724, 256MB DDR2-SDRAM, USB,
Ethernet, and more.
This patch supports the following functions:
- 256MB DDR2-SDRAM
- USB
- I2C
- Ethernet
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h
new file mode 100644
index 0000000..2e2a9a7
--- /dev/null
+++ b/include/configs/ecovec.h
@@ -0,0 +1,200 @@
+/*
+ * Configuation settings for the Renesas Solutions ECOVEC board
+ *
+ * Copyright (C) 2009 - 2011 Renesas Solutions Corp.
+ * Copyright (C) 2009 Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ * Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ECOVEC_H
+#define __ECOVEC_H
+
+/*
+ * Address Interface BusWidth
+ *-----------------------------------------
+ * 0x0000_0000 U-Boot 16bit
+ * 0x0004_0000 Linux romImage 16bit
+ * 0x0014_0000 MTD for Linux 16bit
+ * 0x0400_0000 Internal I/O 16/32bit
+ * 0x0800_0000 DRAM 32bit
+ * 0x1800_0000 MFI 16bit
+ */
+
+#undef DEBUG
+#define CONFIG_SH 1
+#define CONFIG_SH4 1
+#define CONFIG_SH4A 1
+#define CONFIG_CPU_SH7724 1
+#define BOARD_LATE_INIT 1
+#define CONFIG_ECOVEC 1
+
+#define CONFIG_ECOVEC_ROMIMAGE_ADDR 0xA0040000
+#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_SAVEENV
+
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "console=ttySC0,115200"
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+/* I2C */
+#define CONFIG_CMD_I2C
+#define CONFIG_SH_I2C 1
+#define CONFIG_HARD_I2C 1
+#define CONFIG_I2C_MULTI_BUS 1
+#define CONFIG_SYS_MAX_I2C_BUS 2
+#define CONFIG_SYS_I2C_MODULE 1
+#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SH_I2C_DATA_HIGH 4
+#define CONFIG_SH_I2C_DATA_LOW 5
+#define CONFIG_SH_I2C_CLOCK 41666666
+#define CONFIG_SH_I2C_BASE0 0xA4470000
+#define CONFIG_SH_I2C_BASE1 0xA4750000
+
+/* Ether */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_SH_ETHER 1
+#define CONFIG_SH_ETHER_USE_PORT (0)
+#define CONFIG_SH_ETHER_PHY_ADDR (0x1f)
+#define CONFIG_PHYLIB
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+
+/* USB / R8A66597 */
+#define CONFIG_USB_R8A66597_HCD
+#define CONFIG_R8A66597_BASE_ADDR 0xA4D80000
+#define CONFIG_R8A66597_XTAL 0x0000 /* 12MHz */
+#define CONFIG_R8A66597_LDRV 0x8000 /* 3.3V */
+#define CONFIG_R8A66597_ENDIAN 0x0000 /* little */
+#define CONFIG_SUPERH_ON_CHIP_R8A66597
+
+/* undef to save memory */
+#define CONFIG_SYS_LONGHELP
+/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT "=> "
+/* Buffer size for input from the Console */
+#define CONFIG_SYS_CBSIZE 256
+/* Buffer size for Console output */
+#define CONFIG_SYS_PBSIZE 256
+/* max args accepted for monitor commands */
+#define CONFIG_SYS_MAXARGS 16
+/* Buffer size for Boot Arguments passed to kernel */
+#define CONFIG_SYS_BARGSIZE 512
+/* List of legal baudrate settings for this board */
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE 1
+#define CONFIG_SCIF 1
+#define CONFIG_CONS_SCIF0 1
+
+/* Suppress display of console information at boot */
+#undef CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+/* SDRAM */
+#define CONFIG_SYS_SDRAM_BASE (0x88000000)
+#define CONFIG_SYS_SDRAM_SIZE (256 * 1024 * 1024)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
+
+#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 200 * 1024 * 1024)
+/* Enable alternate, more extensive, memory test */
+#undef CONFIG_SYS_ALT_MEMTEST
+/* Scratch address used by the alternate memory test */
+#undef CONFIG_SYS_MEMTEST_SCRATCH
+
+/* Enable temporary baudrate change while serial download */
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE
+
+/* FLASH */
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_CFI
+#undef CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BASE (0xA0000000)
+#define CONFIG_SYS_MAX_FLASH_SECT 512
+
+/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+
+/* Timeout for Flash erase operations (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000)
+/* Timeout for Flash write operations (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000)
+/* Timeout for Flash set sector lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000)
+/* Timeout for Flash clear lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000)
+
+/*
+ * Use hardware flash sectors protection instead
+ * of U-Boot software protection
+ */
+#undef CONFIG_SYS_FLASH_PROTECTION
+#undef CONFIG_SYS_DIRECT_FLASH_TFTP
+
+/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
+/* Monitor size */
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+/* Size of DRAM reserved for malloc() use */
+#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE (256)
+#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* ENV setting */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
+/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
+#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 41666666
+#define CONFIG_SYS_TMU_CLK_DIV 4
+#define CONFIG_SYS_HZ 1000
+
+#endif /* __ECOVEC_H */