PowerPC: Update MIP405/MIP405T to use Kconfig better
Convert CONFIG_MIP405T from SYS_EXTRA_OPTIONS to a real config
There are two boards, MIP405 and MIP405T that have a few differences.
Start by checking for CONFIG_TARGET_MIP405. Then introduce
CONFIG_TARGET_MIP405T and use that not CONFIG_MIP405T. Next, convert
also convert the usage of CONFIG_ISO_STRING to be based on Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 2262175..3c110fa 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -20,7 +20,7 @@
#include "../pip405/pip405.h"
#include <asm/4xx_pci.h>
#endif
-#ifdef CONFIG_MIP405
+#if defined(CONFIG_TARGET_MIP405) || defined(CONFIG_TARGET_MIP405T)
#include "../mip405/mip405.h"
#include <asm/4xx_pci.h>
#endif
@@ -36,7 +36,8 @@
#define I2C_BACKUP_ADDR 0x7C00 /* 0x200 bytes for backup */
#define IMAGE_SIZE CONFIG_SYS_MONITOR_LEN /* ugly, but it works for now */
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
+#if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) \
+ || defined(CONFIG_TARGET_MIP405T)
/*-----------------------------------------------------------------------
* On PIP/MIP405 we have 3 (4) possible boot mode
*
@@ -116,7 +117,7 @@
mtdcr(EBC0_CFGDATA, FLASH_CR_B);
}
}
-#endif /* #if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) */
+#endif /* #if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) */
#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
/* adjust flash start and protection info */
@@ -190,12 +191,11 @@
#if defined(CONFIG_PATI)
int start_sect;
#endif
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
+#if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) \
+ || defined(CONFIG_TARGET_MIP405T) || defined(CONFIG_PATI)
char *copystr = (char *)src;
ulong *magic = (ulong *)src;
-#endif
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
if (uimage_to_cpu (magic[0]) != IH_MAGIC) {
puts("Bad Magic number\n");
return -1;
@@ -241,7 +241,7 @@
return (1);
}
-#else /* #if !defined(CONFIG_PATI */
+#else /* #if !defined(CONFIG_PATI) */
start = FIRM_START;
start_sect = -1;
@@ -701,7 +701,7 @@
strcpy(buf,"### No HW ID - assuming PIP405");
}
#endif
-#ifdef CONFIG_MIP405
+#if defined(CONFIG_TARGET_MIP405) || defined(CONFIG_TARGET_MIP405T)
if (!s || strncmp (s, "MIP405", 6)) {
strcpy(buf,"### No HW ID - assuming MIP405");
}
diff --git a/board/mpl/common/common_util.h b/board/mpl/common/common_util.h
index e81ee35..22f5c2e 100644
--- a/board/mpl/common/common_util.h
+++ b/board/mpl/common/common_util.h
@@ -17,12 +17,10 @@
void get_backup_values(backup_t *buf);
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
#define BOOT_MPS 0x01
#define BOOT_PCI 0x02
int get_boot_mode(void);
void setup_cs_reloc(void);
-#endif
void check_env(void);
#if defined(CONFIG_CMD_DOC)
diff --git a/board/mpl/common/pci_parts.h b/board/mpl/common/pci_parts.h
index 4193e92..75e8cae 100644
--- a/board/mpl/common/pci_parts.h
+++ b/board/mpl/common/pci_parts.h
@@ -91,7 +91,7 @@
static struct pci_pip405_config_entry piix4_ide_cntrl_f1[] = {
{PCI_CFG_PIIX4_BMIBA, 0x0001000, 4}, /* set BMI to a valid address */
{PCI_COMMAND, 0x0001, 2}, /* enable IO access */
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
{PCI_CFG_PIIX4_IDETIM, 0x80008000, 4}, /* enable Both IDE channels */
#else
{PCI_CFG_PIIX4_IDETIM, 0x00008000, 4}, /* enable IDE channel0 */
@@ -101,7 +101,7 @@
/* PIIX4 USB Controller Function 2 */
static struct pci_pip405_config_entry piix4_usb_cntrl_f2[] = {
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
{PCI_INTERRUPT_LINE, 31, 1}, /* Int vector = 31 */
{PCI_BASE_ADDRESS_4, 0x0000E001, 4}, /* Set IO Address to 0xe000 to 0xe01F */
{PCI_LATENCY_TIMER, 0x80, 1}, /* Latency Timer 0x80 */