ARM: dts: stm32mp: alignment with v6.4
Device tree alignment with Linux kernel v6.4.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi
index d94ba25..d163c26 100644
--- a/arch/arm/dts/stm32mp131.dtsi
+++ b/arch/arm/dts/stm32mp131.dtsi
@@ -397,15 +397,45 @@
status = "disabled";
};
+ usart3: serial@4000f000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000f000 0x400>;
+ interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART3_K>;
+ resets = <&rcc USART3_R>;
+ wakeup-source;
+ dmas = <&dmamux1 45 0x400 0x5>,
+ <&dmamux1 46 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
uart4: serial@40010000 {
compatible = "st,stm32h7-uart";
reg = <0x40010000 0x400>;
- interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART4_K>;
resets = <&rcc UART4_R>;
+ wakeup-source;
+ dmas = <&dmamux1 63 0x400 0x5>,
+ <&dmamux1 64 0x400 0x1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
+ uart5: serial@40011000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART5_K>;
+ resets = <&rcc UART5_R>;
+ wakeup-source;
+ dmas = <&dmamux1 65 0x400 0x5>,
+ <&dmamux1 66 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
i2c1: i2c@40012000 {
compatible = "st,stm32mp13-i2c";
reg = <0x40012000 0x400>;
@@ -442,6 +472,32 @@
status = "disabled";
};
+ uart7: serial@40018000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40018000 0x400>;
+ interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART7_K>;
+ resets = <&rcc UART7_R>;
+ wakeup-source;
+ dmas = <&dmamux1 79 0x400 0x5>,
+ <&dmamux1 80 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart8: serial@40019000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40019000 0x400>;
+ interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART8_K>;
+ resets = <&rcc UART8_R>;
+ wakeup-source;
+ dmas = <&dmamux1 81 0x400 0x5>,
+ <&dmamux1 82 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
timers1: timer@44000000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -524,6 +580,19 @@
};
};
+ usart6: serial@44003000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x44003000 0x400>;
+ interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART6_K>;
+ resets = <&rcc USART6_R>;
+ wakeup-source;
+ dmas = <&dmamux1 71 0x400 0x5>,
+ <&dmamux1 72 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
i2s1: audio-controller@44004000 {
compatible = "st,stm32h7-i2s";
reg = <0x44004000 0x400>;
@@ -748,6 +817,32 @@
status = "disabled";
};
+ usart1: serial@4c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c000000 0x400>;
+ interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ resets = <&rcc USART1_R>;
+ wakeup-source;
+ dmas = <&dmamux1 41 0x400 0x5>,
+ <&dmamux1 42 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ usart2: serial@4c001000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c001000 0x400>;
+ interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ resets = <&rcc USART2_R>;
+ wakeup-source;
+ dmas = <&dmamux1 43 0x400 0x5>,
+ <&dmamux1 44 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
i2s4: audio-controller@4c002000 {
compatible = "st,stm32h7-i2s";
reg = <0x4c002000 0x400>;
@@ -1001,8 +1096,6 @@
reg = <0x50000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-
clock-names = "hse", "hsi", "csi", "lse", "lsi";
clocks = <&scmi_clk CK_SCMI_HSE>,
<&scmi_clk CK_SCMI_HSI>,