davinci: display correct clock info
Move the clock-rate dumping code into the cpu/.../davinci area
where it should have been, enabled by CONFIG_DISPLAY_CPUINFO,
updating the format and showing the DSP clock (where relevant).
Switch boards to use the cpuinfo() hook for this stuff.
Remove a few now-obsolete PLL #defines.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
diff --git a/cpu/arm926ejs/davinci/Makefile b/cpu/arm926ejs/davinci/Makefile
index 480f19f..6eaa89c 100644
--- a/cpu/arm926ejs/davinci/Makefile
+++ b/cpu/arm926ejs/davinci/Makefile
@@ -27,7 +27,7 @@
LIB = $(obj)lib$(SOC).a
-COBJS-y += timer.o psc.o
+COBJS-y += cpu.o timer.o psc.o
COBJS-$(CONFIG_SOC_DM355) += dm355.o
COBJS-$(CONFIG_SOC_DM644X) += dm644x.o
COBJS-$(CONFIG_DRIVER_TI_EMAC) += ether.o lxt972.o dp83848.o
diff --git a/cpu/arm926ejs/davinci/cpu.c b/cpu/arm926ejs/davinci/cpu.c
new file mode 100644
index 0000000..29aead6
--- /dev/null
+++ b/cpu/arm926ejs/davinci/cpu.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2004 Texas Instruments.
+ * Copyright (C) 2009 David Brownell
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+
+/* offsets from PLL controller base */
+#define PLLC_PLLCTL 0x100
+#define PLLC_PLLM 0x110
+#define PLLC_PREDIV 0x114
+#define PLLC_PLLDIV1 0x118
+#define PLLC_PLLDIV2 0x11c
+#define PLLC_PLLDIV3 0x120
+#define PLLC_POSTDIV 0x128
+#define PLLC_BPDIV 0x12c
+#define PLLC_PLLDIV4 0x160
+#define PLLC_PLLDIV5 0x164
+#define PLLC_PLLDIV6 0x168
+#define PLLC_PLLDIV8 0x170
+#define PLLC_PLLDIV9 0x174
+
+#define BIT(x) (1 << (x))
+
+/* SOC-specific pll info */
+#ifdef CONFIG_SOC_DM355
+#define ARM_PLLDIV PLLC_PLLDIV1
+#define DDR_PLLDIV PLLC_PLLDIV1
+#endif
+
+#ifdef CONFIG_SOC_DM644X
+#define ARM_PLLDIV PLLC_PLLDIV2
+#define DSP_PLLDIV PLLC_PLLDIV1
+#define DDR_PLLDIV PLLC_PLLDIV2
+#endif
+
+#ifdef CONFIG_SOC_DM6447
+#define ARM_PLLDIV PLLC_PLLDIV2
+#define DSP_PLLDIV PLLC_PLLDIV1
+#define DDR_PLLDIV PLLC_PLLDIV1
+#endif
+
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+
+static unsigned pll_div(volatile void *pllbase, unsigned offset)
+{
+ u32 div;
+
+ div = REG(pllbase + offset);
+ return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1;
+}
+
+static inline unsigned pll_prediv(volatile void *pllbase)
+{
+#ifdef CONFIG_SOC_DM355
+ /* this register read seems to fail on pll0 */
+ if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
+ return 8;
+ else
+ return pll_div(pllbase, PLLC_PREDIV);
+#endif
+ return 1;
+}
+
+static inline unsigned pll_postdiv(volatile void *pllbase)
+{
+#ifdef CONFIG_SOC_DM355
+ return pll_div(pllbase, PLLC_POSTDIV);
+#elif defined(CONFIG_SOC_DM6446)
+ if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
+ return pll_div(pllbase, PLLC_POSTDIV);
+#endif
+ return 1;
+}
+
+static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div)
+{
+ volatile void *pllbase = (volatile void *) pll_addr;
+ unsigned base = CONFIG_SYS_HZ_CLOCK / 1000;
+
+ /* the PLL might be bypassed */
+ if (REG(pllbase + PLLC_PLLCTL) & BIT(0)) {
+ base /= pll_prediv(pllbase);
+ base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff);
+ base /= pll_postdiv(pllbase);
+ }
+ return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div));
+}
+
+int print_cpuinfo(void)
+{
+ /* REVISIT fetch and display CPU ID and revision information
+ * too ... that will matter as more revisions appear.
+ */
+ printf("Cores: ARM %d MHz",
+ pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV));
+
+#ifdef DSP_PLLDIV
+ printf(", DSP %d MHz",
+ pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV));
+#endif
+
+ printf("\nDDR: %d MHz\n",
+ /* DDR PHY uses an x2 input clock */
+ pll_sysclk_mhz(DAVINCI_PLL_CNTRL1_BASE, DDR_PLLDIV)
+ / 2);
+ return 0;
+}
+
+#endif
+