arm, at91: support for sam9260 based smartweb board

add support for the at91sam9260 based board smartweb from
siemens. SPL is used without serial support, as this
SoC has only 4k sram for running SPL. Here a U-Boot
bootlog:

RomBOOT
>

U-Boot 2015.07-rc2-00109-g4ae828c (Jun 15 2015 - 09:31:16 +0200)

CPU: AT91SAM9260
Crystal frequency:   18.432 MHz
CPU clock        :  198.656 MHz
Master clock     :   99.328 MHz
       Watchdog enabled
DRAM:  64 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   macb0
Hit any key to stop autoboot:  0
U-Boot>

Signed-off-by: Heiko Schocher <hs@denx.de>
diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h
index 5afe791..847da59 100644
--- a/arch/arm/include/asm/mach-types.h
+++ b/arch/arm/include/asm/mach-types.h
@@ -276,6 +276,7 @@
 #define MACH_TYPE_TRIZEPS4WL           1649
 #define MACH_TYPE_TS78XX               1652
 #define MACH_TYPE_SFFSDR               1657
+#define MACH_TYPE_SMARTWEB             1668
 #define MACH_TYPE_PCM037               1673
 #define MACH_TYPE_DB88F6281_BP         1680
 #define MACH_TYPE_RD88F6192_NAS        1681
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index bbf4228..d8d46dc 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -124,6 +124,11 @@
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
 
+config TARGET_SMARTWEB
+	bool "Support smartweb"
+	select CPU_ARM926EJS
+	select SUPPORT_SPL
+
 endchoice
 
 config SYS_SOC
@@ -155,6 +160,7 @@
 source "board/ronetix/pm9g45/Kconfig"
 source "board/siemens/corvus/Kconfig"
 source "board/siemens/taurus/Kconfig"
+source "board/siemens/smartweb/Kconfig"
 source "board/taskit/stamp9g20/Kconfig"
 
 endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 0d3ee48..313eb47 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o
 ifneq ($(CONFIG_SPL_BUILD),)
+obj-$(CONFIG_AT91SAM9260) += sdram.o spl_at91.o
 obj-$(CONFIG_AT91SAM9G20) += sdram.o spl_at91.o
 obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o
 obj-$(CONFIG_AT91SAM9N12) += mpddrc.o spl_at91.o