powerpc/ppc4xx: Support gdsys multichannel iocon hardware
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/include/configs/iocon.h b/include/configs/iocon.h
index 67a7ab9..9d0d7a1 100644
--- a/include/configs/iocon.h
+++ b/include/configs/iocon.h
@@ -63,6 +63,7 @@
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_FPGAD
#undef CONFIG_CMD_EEPROM
/*
@@ -100,23 +101,53 @@
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
+#define CONFIG_SYS_I2C_SPEED 400000
+
+#define CONFIG_PCA953X /* NXP PCA9554 */
+#define CONFIG_PCA9698 /* NXP PCA9698 */
+
/*
* Software (bit-bang) I2C driver configuration
*/
+#define CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
+#define I2C_SOFT_DECLARATIONS2
+#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x7F
+#define I2C_SOFT_DECLARATIONS3
+#define CONFIG_SYS_I2C_SOFT_SPEED_3 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE_3 0x7F
+#define I2C_SOFT_DECLARATIONS4
+#define CONFIG_SYS_I2C_SOFT_SPEED_4 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F
+
+#define CONFIG_SYS_CH7301_I2C {1, 2, 3, 4}
#ifndef __ASSEMBLY__
-void fpga_gpio_set(int pin);
-void fpga_gpio_clear(int pin);
-int fpga_gpio_get(int pin);
+void fpga_gpio_set(unsigned int bus, int pin);
+void fpga_gpio_clear(unsigned int bus, int pin);
+int fpga_gpio_get(unsigned int bus, int pin);
#endif
#define I2C_ACTIVE { }
#define I2C_TRISTATE { }
-#define I2C_READ fpga_gpio_get(0x0040) ? 1 : 0
-#define I2C_SDA(bit) if (bit) fpga_gpio_set(0x0040); \
- else fpga_gpio_clear(0x0040)
-#define I2C_SCL(bit) if (bit) fpga_gpio_set(0x0020); \
- else fpga_gpio_clear(0x0020)
+#define I2C_READ \
+ (fpga_gpio_get(I2C_ADAP_HWNR, 0x0040) ? 1 : 0)
+#define I2C_SDA(bit) \
+ do { \
+ if (bit) \
+ fpga_gpio_set(I2C_ADAP_HWNR, 0x0040); \
+ else \
+ fpga_gpio_clear(I2C_ADAP_HWNR, 0x0040); \
+ } while (0)
+#define I2C_SCL(bit) \
+ do { \
+ if (bit) \
+ fpga_gpio_set(I2C_ADAP_HWNR, 0x0020); \
+ else \
+ fpga_gpio_clear(I2C_ADAP_HWNR, 0x0020); \
+ } while (0)
#define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */
/*
@@ -236,10 +267,10 @@
#define CONFIG_SYS_FPGA_COUNT 1
-#define CONFIG_SYS_FPGA_PTR \
- { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE }
+#define CONFIG_SYS_MCLINK_MAX 3
-#define CONFIG_SYS_FPGA_COMMON
+#define CONFIG_SYS_FPGA_PTR \
+ { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, NULL, NULL, NULL }
/* Memory Bank 3 (Latches) initialization */
#define CONFIG_SYS_LATCH_BASE 0x7f200000
@@ -256,6 +287,9 @@
*/
#define CONFIG_SYS_MPC92469AC
#define CONFIG_SYS_CH7301
-#define CONFIG_SYS_OSD_SCREENS CONFIG_SYS_FPGA_COUNT
+#define CONFIG_SYS_OSD_SCREENS 1
+
+#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
+#define CONFIG_BITBANGMII_MULTI
#endif /* __CONFIG_H */