armv8: psci: add ARMV8_PSCI_RELOCATE Kconfig option
There is an user-selectable SYS_HAS_ARMV8_SECURE_BASE, which has the
same meaning but is just for the ls1043ardb board. As no in-tree config
uses this, drop it and replace it with something more sophiticated:
ARMV8_PSCI_RELOCATE. This option will then enable the ARMV8_SECURE_BASE
option which is used as the base to relocate the PSCI code (or any code
in the secure region, but that is only PSCI). A SoC (or board) can now
opt-in into having such a secure region by enabling
SYS_HAS_ARMV8_SECURE_BASE. Enable it for the LS1043A SoC, where it was
possible to relocate the PSCI code before as well as on the LS1028A SoC
where there will be PSCI support soon.
Additionally, make ARMV8_PSCI and SEC_FIRMWARE_ARMV8_PSCI exclusive.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 4d4469c..09f3f50 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -90,6 +90,7 @@
config SEC_FIRMWARE_ARMV8_PSCI
bool "PSCI implementation in secure monitor firmware"
depends on ARMV8_SEC_FIRMWARE_SUPPORT || SPL_ARMV8_SEC_FIRMWARE_SUPPORT
+ depends on ARMV8_PSCI=n
help
This config enables the ARMv8 PSCI implementation in secure monitor
firmware. This is a private PSCI implementation and different from
@@ -131,6 +132,9 @@
Select Y here to make use of PSCI calls for system reset
+config SYS_HAS_ARMV8_SECURE_BASE
+ bool
+
config ARMV8_PSCI
bool "Enable PSCI support" if EXPERT
help
@@ -158,23 +162,27 @@
A value 0 or no definition of it works for single cluster system.
System with multi-cluster should difine their own exact value.
-config ARMV8_EA_EL3_FIRST
- bool "External aborts and SError interrupt exception are taken in EL3"
+config ARMV8_PSCI_RELOCATE
+ bool "Relocate PSCI code"
+ depends on ARMV8_PSCI
+ depends on SYS_HAS_ARMV8_SECURE_BASE
help
- Exception handling at all exception levels for External Abort and
- SError interrupt exception are taken in EL3.
-
-if SYS_HAS_ARMV8_SECURE_BASE
+ Relocate PSCI code, for example to a secure memory on the SoC. If not
+ set, the PSCI sections are placed together with the u-boot and the
+ regions will be marked as reserved before linux is started.
config ARMV8_SECURE_BASE
hex "Secure address for PSCI image"
- depends on ARMV8_PSCI
+ depends on ARMV8_PSCI_RELOCATE
+ default 0x18000000 if ARCH_LS1028A
help
Address for placing the PSCI text, data and stack sections.
- If not defined, the PSCI sections are placed together with the u-boot
- but platform can choose to place PSCI code image separately in other
- places such as some secure RAM built-in SOC etc.
+
-endif
+config ARMV8_EA_EL3_FIRST
+ bool "External aborts and SError interrupt exception are taken in EL3"
+ help
+ Exception handling at all exception levels for External Abort and
+ SError interrupt exception are taken in EL3.
endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 6f8d5cb..80a1642 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -55,6 +55,7 @@
select SYS_FSL_ERRATUM_A011334
select SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
select RESV_RAM if GIC_V3_ITS
+ select SYS_HAS_ARMV8_SECURE_BASE
imply PANIC_HANG
config ARCH_LS1043A
@@ -90,6 +91,7 @@
select SYS_I2C_MXC_I2C2 if !DM_I2C
select SYS_I2C_MXC_I2C3 if !DM_I2C
select SYS_I2C_MXC_I2C4 if !DM_I2C
+ select SYS_HAS_ARMV8_SECURE_BASE
imply CMD_PCI
imply ID_EEPROM