dts: dragonboard820c: use correct bindings for clocks
Don't use hardcoded clock IDs, use the IDs from the dt-bindings to be
compatible with upstream.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
diff --git a/arch/arm/dts/dragonboard820c.dts b/arch/arm/dts/dragonboard820c.dts
index 86b7f83..282c37e 100644
--- a/arch/arm/dts/dragonboard820c.dts
+++ b/arch/arm/dts/dragonboard820c.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "skeleton64.dtsi"
+#include <dt-bindings/clock/qcom,gcc-msm8996.h>
/ {
model = "Qualcomm Technologies, Inc. DB820c";
@@ -78,7 +79,7 @@
blsp2_uart2: serial@75b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x75b0000 0x1000>;
- clocks = <&gcc 4>;
+ clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>;
clock-names = "core";
pinctrl-names = "uart";
pinctrl-0 = <&blsp8_uart>;
@@ -89,7 +90,7 @@
reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
index = <0x0>;
bus-width = <4>;
- clock = <&gcc 0>;
+ clock = <&gcc GCC_SDCC1_APPS_CLK>;
clock-frequency = <200000000>;
};
diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c
index 1e6fdb5..a473161 100644
--- a/drivers/clk/qcom/clock-apq8096.c
+++ b/drivers/clk/qcom/clock-apq8096.c
@@ -13,6 +13,7 @@
#include <errno.h>
#include <asm/io.h>
#include <linux/bitops.h>
+#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include "clock-qcom.h"
@@ -107,10 +108,10 @@
struct msm_clk_priv *priv = dev_get_priv(clk->dev);
switch (clk->id) {
- case 0: /* SDC1 */
+ case GCC_SDCC1_APPS_CLK: /* SDC1 */
return clk_init_sdc(priv, rate);
break;
- case 4: /*UART2*/
+ case GCC_BLSP2_UART2_APPS_CLK: /*UART2*/
return clk_init_uart(priv);
default:
return 0;