* Patches by Thomas Viehweger, 16 Mar 2004:
- show PCI clock frequency on MPC8260 systems
- add FCC_PSMR_RMII flag for HiP7 processors
- in do_jffs2_fsload(), take load address from load_addr if not set
explicit, update load_addr otherwise
- replaced printf by putc/puts when no formatting is needed
(smaller code size, faster execution)
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index e5b1ca1..5ecf888 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -149,14 +149,14 @@
if (addr_last > b_end) {
s_last[bank] = s_end;
} else {
- printf ("Error: end address"
+ puts ("Error: end address"
" not on sector boundary\n");
rcode = 1;
break;
}
}
if (s_last[bank] < s_first[bank]) {
- printf ("Error: end sector"
+ puts ("Error: end sector"
" precedes start sector\n");
rcode = 1;
break;
@@ -165,7 +165,7 @@
addr_first = (sect == s_end) ? b_end + 1: info->start[sect + 1];
(*s_count) += s_last[bank] - s_first[bank] + 1;
} else if (s_last[bank] >= 0) {
- printf("Error: cannot span across banks when they are"
+ puts ("Error: cannot span across banks when they are"
" mapped in reverse order\n");
rcode = 1;
break;
@@ -225,7 +225,7 @@
if ((n = abbrev_spec(argv[1], &info, §_first, §_last)) != 0) {
if (n < 0) {
- printf("Bad sector specification\n");
+ puts ("Bad sector specification\n");
return 1;
}
printf ("Erase Flash Sectors %d-%d in Bank # %d ",
@@ -294,7 +294,7 @@
}
printf ("Erased %d sectors\n", erased);
} else if (rcode == 0) {
- printf ("Error: start and/or end address"
+ puts ("Error: start and/or end address"
" not on sector boundary\n");
rcode = 1;
}
@@ -332,7 +332,7 @@
if (addr_dataflash(addr_first) && addr_dataflash(addr_last)) {
status = dataflash_real_protect(p,addr_first,addr_last);
if (status < 0){
- printf("Bad DataFlash sector specification\n");
+ puts ("Bad DataFlash sector specification\n");
return 1;
}
printf("%sProtect %d DataFlash Sectors\n",
@@ -371,7 +371,7 @@
if ((n = abbrev_spec(argv[2], &info, §_first, §_last)) != 0) {
if (n < 0) {
- printf("Bad sector specification\n");
+ puts ("Bad sector specification\n");
return 1;
}
printf("%sProtect Flash Sectors %d-%d in Bank # %d\n",
@@ -411,7 +411,7 @@
info = &flash_info[bank-1];
if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
+ puts ("missing or unknown FLASH type\n");
return 1;
}
for (i=0; i<info->sector_count; ++i) {
@@ -485,7 +485,7 @@
printf ("%sProtected %d sectors\n",
p ? "" : "Un-", protected);
} else if (rcode == 0) {
- printf ("Error: start and/or end address"
+ puts ("Error: start and/or end address"
" not on sector boundary\n");
rcode = 1;
}