Convert CONFIG_SYS_NAND_HW_ECC_OOBFIRST to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_NAND_HW_ECC_OOBFIRST
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/README b/README
index d75c3fb..4309d93 100644
--- a/README
+++ b/README
@@ -1378,10 +1378,6 @@
CONFIG_SYS_NAND_U_BOOT_START
Entry point in loaded image to jump to
- CONFIG_SYS_NAND_HW_ECC_OOBFIRST
- Define this if you need to first read the OOB and then the
- data. This is used, for example, on davinci platforms.
-
CONFIG_SPL_RAM_DEVICE
Support for running image already present in ram, in SPL binary
diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig
index 30454a3..84563b2 100644
--- a/configs/da850evm_nand_defconfig
+++ b/configs/da850evm_nand_defconfig
@@ -87,6 +87,7 @@
CONFIG_SYS_NAND_USE_FLASH_BBT=y
CONFIG_NAND_DAVINCI=y
CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST=y
+CONFIG_SYS_NAND_HW_ECC_OOBFIRST=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index 51c78dc..a067c01 100644
--- a/configs/omapl138_lcdk_defconfig
+++ b/configs/omapl138_lcdk_defconfig
@@ -84,6 +84,7 @@
CONFIG_SYS_NAND_USE_FLASH_BBT=y
CONFIG_NAND_DAVINCI=y
CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST=y
+CONFIG_SYS_NAND_HW_ECC_OOBFIRST=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 48a7507..49b7a4b 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -712,6 +712,11 @@
help
Support for NAND boot using simple NAND drivers that
expose the cmd_ctrl() interface.
+
+config SYS_NAND_HW_ECC_OOBFIRST
+ bool "In SPL, read the OOB first and then the data from NAND"
+ depends on SPL_NAND_SIMPLE
+
endif
endif # if NAND
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 262a79b..abf5db9 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -113,7 +113,6 @@
#define CONFIG_SYS_NAND_MASK_CLE 0x10
#define CONFIG_SYS_NAND_MASK_ALE 0x8
#undef CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000
#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index 4b24d61..184360f 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -111,7 +111,6 @@
#define CONFIG_SYS_NAND_MASK_CLE 0x10
#define CONFIG_SYS_NAND_MASK_ALE 0x8
#undef CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000