net: abort network initialization if the PHY driver fails
Now that phy_startup() can return an actual error code, check for that error
code and abort network initialization if the PHY fails.
Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Nobuhiro Iwamamatsu <nobuhiro.iwamatsu.yj@renesas.com> (sh_eth part)
Acked-by: Stephan Linz <linz@li-pro.net> (Xilinx part, xilinx_axi_emac and xilinx_ll_temac)
Reviewed-by: Marek Vasut <marex@denx.de> (FEC part)
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index eee41d7..5700552 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -510,7 +510,13 @@
fec_eth_phy_config(edev);
if (fec->phydev) {
/* Start up the PHY */
- phy_startup(fec->phydev);
+ int ret = phy_startup(fec->phydev);
+
+ if (ret) {
+ printf("Could not initialize PHY %s\n",
+ fec->phydev->dev->name);
+ return ret;
+ }
speed = fec->phydev->speed;
} else {
speed = _100BASET;
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index f34f4db..2b616ad 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -363,6 +363,9 @@
{
struct fm_eth *fm_eth;
struct fsl_enet_mac *mac;
+#ifdef CONFIG_PHYLIB
+ int ret;
+#endif
fm_eth = (struct fm_eth *)dev->priv;
mac = fm_eth->mac;
@@ -384,7 +387,11 @@
fmc_tx_port_graceful_stop_disable(fm_eth);
#ifdef CONFIG_PHYLIB
- phy_startup(fm_eth->phydev);
+ ret = phy_startup(fm_eth->phydev);
+ if (ret) {
+ printf("%s: Could not initialize\n", fm_eth->phydev->dev->name);
+ return ret;
+ }
#else
fm_eth->phydev->speed = SPEED_1000;
fm_eth->phydev->link = 1;
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index bb57e4d..268d884 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -415,7 +415,11 @@
goto err_phy_cfg;
}
phy = port_info->phydev;
- phy_startup(phy);
+ ret = phy_startup(phy);
+ if (ret) {
+ printf(SHETHER_NAME ": phy startup failure\n");
+ return ret;
+ }
val = 0;
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 3c1c8f0..f5e314b 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -480,6 +480,7 @@
int i;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
tsec_t *regs = priv->regs;
+ int ret;
/* Make sure the controller is stopped */
tsec_halt(dev);
@@ -511,7 +512,12 @@
startup_tsec(dev);
/* Start up the PHY */
- phy_startup(priv->phydev);
+ ret = phy_startup(priv->phydev);
+ if (ret) {
+ printf("Could not initialize PHY %s\n",
+ priv->phydev->dev->name);
+ return ret;
+ }
adjust_link(priv, priv->phydev);
diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c
index 7854a04..d777144 100644
--- a/drivers/net/xilinx_axi_emac.c
+++ b/drivers/net/xilinx_axi_emac.c
@@ -272,7 +272,11 @@
phydev->advertising = phydev->supported;
priv->phydev = phydev;
phy_config(phydev);
- phy_startup(phydev);
+ if (phy_startup(phydev)) {
+ printf("axiemac: could not initialize PHY %s\n",
+ phydev->dev->name);
+ return 0;
+ }
switch (phydev->speed) {
case 1000:
diff --git a/drivers/net/xilinx_ll_temac.c b/drivers/net/xilinx_ll_temac.c
index 27dafc1..b67153b 100644
--- a/drivers/net/xilinx_ll_temac.c
+++ b/drivers/net/xilinx_ll_temac.c
@@ -232,6 +232,7 @@
static int ll_temac_init(struct eth_device *dev, bd_t *bis)
{
struct ll_temac *ll_temac = dev->priv;
+ int ret;
printf("%s: Xilinx XPS LocalLink Tri-Mode Ether MAC #%d at 0x%08X.\n",
dev->name, dev->index, dev->iobase);
@@ -240,7 +241,12 @@
return -1;
/* Start up the PHY */
- phy_startup(ll_temac->phydev);
+ ret = phy_startup(ll_temac->phydev);
+ if (ret) {
+ printf("%s: Could not initialize PHY %s\n",
+ dev->name, ll_temac->phydev->dev->name);
+ return ret;
+ }
if (!ll_temac_adjust_link(dev)) {
ll_temac_halt(dev);