MX5: Clean up the output of "clocks" command
The new output looks like this:
> clocks
PLL1 800 MHz
PLL2 665 MHz
PLL3 216 MHz
AHB 133000 kHz
IPG 66500 kHz
IPG PERCLK 665000 kHz
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Jason Liu <jason.hui@linaro.org>
diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c
index 09556d3..0769a64 100644
--- a/arch/arm/cpu/armv7/mx5/clock.c
+++ b/arch/arm/cpu/armv7/mx5/clock.c
@@ -333,18 +333,20 @@
u32 freq;
freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK);
- printf("pll1: %dMHz\n", freq / 1000000);
+ printf("PLL1 %8d MHz\n", freq / 1000000);
freq = decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_SYS_MX5_HCLK);
- printf("pll2: %dMHz\n", freq / 1000000);
+ printf("PLL2 %8d MHz\n", freq / 1000000);
freq = decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_SYS_MX5_HCLK);
- printf("pll3: %dMHz\n", freq / 1000000);
+ printf("PLL3 %8d MHz\n", freq / 1000000);
#ifdef CONFIG_MX53
freq = decode_pll(mxc_plls[PLL4_CLOCK], CONFIG_SYS_MX5_HCLK);
- printf("pll4: %dMHz\n", freq / 1000000);
+ printf("PLL4 %8d MHz\n", freq / 1000000);
#endif
- printf("ahb clock : %dHz\n", mxc_get_clock(MXC_AHB_CLK));
- printf("ipg clock : %dHz\n", mxc_get_clock(MXC_IPG_CLK));
- printf("ipg per clock : %dHz\n", mxc_get_clock(MXC_IPG_PERCLK));
+
+ printf("\n");
+ printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
+ printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
+ printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000);
return 0;
}