Add initial support for Freescale mx51evk board
The patch adds initial support for the Freescale mx51evk board.
Network (FEC) and SD controller (fsl_esdhc) are supported.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Fred Fan <fanyefeng@gmail.com>
diff --git a/board/freescale/mx51evk/imximage.cfg b/board/freescale/mx51evk/imximage.cfg
new file mode 100644
index 0000000..db09913
--- /dev/null
+++ b/board/freescale/mx51evk/imximage.cfg
@@ -0,0 +1,119 @@
+#
+# (C Copyright 2009
+# Stefano Babic DENX Software Engineering sbabic@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# Boot Device : one of
+# spi_flash, nand, onenand, sd_card
+
+BOOT_FROM spi
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type Address Value
+#
+# where:
+# Addr-type register length (1,2 or 4 bytes)
+# Address absolute address of the register
+# value value to be stored in the register
+
+# Setting IOMUXC
+DATA 4 0x73FA88a0 0x200
+DATA 4 0x73FA850c 0x20c5
+DATA 4 0x73FA8510 0x20c5
+DATA 4 0x73FA883c 0x2
+DATA 4 0x73FA8848 0x2
+DATA 4 0x73FA84b8 0xe7
+DATA 4 0x73FA84bc 0x45
+DATA 4 0x73FA84c0 0x45
+DATA 4 0x73FA84c4 0x45
+DATA 4 0x73FA84c8 0x45
+DATA 4 0x73FA8820 0x0
+DATA 4 0x73FA84a4 0x3
+DATA 4 0x73FA84a8 0x3
+DATA 4 0x73FA84ac 0xe3
+DATA 4 0x73FA84b0 0xe3
+DATA 4 0x73FA84b4 0xe3
+DATA 4 0x73FA84cc 0xe3
+DATA 4 0x73FA84d0 0xe2
+
+DATA 4 0x73FA882c 0x6
+DATA 4 0x73FA88a4 0x6
+DATA 4 0x73FA88ac 0x6
+DATA 4 0x73FA88b8 0x6
+
+# Setting DDR for micron
+# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
+# CAS=3 BL=4
+# ESDCTL_ESDCTL0
+DATA 4 0x83FD9000 0x82a20000
+# ESDCTL_ESDCTL1
+DATA 4 0x83FD9008 0x82a20000
+# ESDCTL_ESDMISC
+DATA 4 0x83FD9010 0x000ad0d0
+# ESDCTL_ESDCFG0
+DATA 4 0x83FD9004 0x333574aa
+# ESDCTL_ESDCFG1
+DATA 4 0x83FD900C 0x333574aa
+
+# Init DRAM on CS0
+# ESDCTL_ESDSCR
+DATA 4 0x83FD9014 0x04008008
+DATA 4 0x83FD9014 0x0000801a
+DATA 4 0x83FD9014 0x0000801b
+DATA 4 0x83FD9014 0x00448019
+DATA 4 0x83FD9014 0x07328018
+DATA 4 0x83FD9014 0x04008008
+DATA 4 0x83FD9014 0x00008010
+DATA 4 0x83FD9014 0x00008010
+DATA 4 0x83FD9014 0x06328018
+DATA 4 0x83FD9014 0x03808019
+DATA 4 0x83FD9014 0x00408019
+DATA 4 0x83FD9014 0x00008000
+
+# Init DRAM on CS1
+DATA 4 0x83FD9014 0x0400800c
+DATA 4 0x83FD9014 0x0000801e
+DATA 4 0x83FD9014 0x0000801f
+DATA 4 0x83FD9014 0x0000801d
+DATA 4 0x83FD9014 0x0732801c
+DATA 4 0x83FD9014 0x0400800c
+DATA 4 0x83FD9014 0x00008014
+DATA 4 0x83FD9014 0x00008014
+DATA 4 0x83FD9014 0x0632801c
+DATA 4 0x83FD9014 0x0380801d
+DATA 4 0x83FD9014 0x0040801d
+DATA 4 0x83FD9014 0x00008004
+
+# Write to CTL0
+DATA 4 0x83FD9000 0xb2a20000
+# Write to CTL1
+DATA 4 0x83FD9008 0xb2a20000
+# ESDMISC
+DATA 4 0x83FD9010 0x000ad6d0
+#ESDCTL_ESDCDLYGD
+DATA 4 0x83FD9034 0x90000000
+DATA 4 0x83FD9014 0x00000000