| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2012 Michal Simek <monstr@monstr.eu> |
| * (C) Copyright 2013 - 2018 Xilinx, Inc. |
| */ |
| |
| #include <common.h> |
| #include <dm/uclass.h> |
| #include <fdtdec.h> |
| #include <fpga.h> |
| #include <mmc.h> |
| #include <watchdog.h> |
| #include <wdt.h> |
| #include <zynqpl.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/sys_proto.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT) |
| static struct udevice *watchdog_dev; |
| #endif |
| |
| #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_BOARD_EARLY_INIT_F) |
| int board_early_init_f(void) |
| { |
| # if defined(CONFIG_WDT) |
| /* bss is not cleared at time when watchdog_reset() is called */ |
| watchdog_dev = NULL; |
| # endif |
| |
| return 0; |
| } |
| #endif |
| |
| int board_init(void) |
| { |
| #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT) |
| if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) { |
| debug("Watchdog: Not found by seq!\n"); |
| if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) { |
| puts("Watchdog: Not found!\n"); |
| return 0; |
| } |
| } |
| |
| wdt_start(watchdog_dev, 0, 0); |
| puts("Watchdog: Started\n"); |
| # endif |
| |
| return 0; |
| } |
| |
| int board_late_init(void) |
| { |
| switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) { |
| case ZYNQ_BM_QSPI: |
| env_set("modeboot", "qspiboot"); |
| break; |
| case ZYNQ_BM_NAND: |
| env_set("modeboot", "nandboot"); |
| break; |
| case ZYNQ_BM_NOR: |
| env_set("modeboot", "norboot"); |
| break; |
| case ZYNQ_BM_SD: |
| env_set("modeboot", "sdboot"); |
| break; |
| case ZYNQ_BM_JTAG: |
| env_set("modeboot", "jtagboot"); |
| break; |
| default: |
| env_set("modeboot", ""); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| int zynq_board_read_rom_ethaddr(unsigned char *ethaddr) |
| { |
| #if defined(CONFIG_ZYNQ_GEM_EEPROM_ADDR) && \ |
| defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET) |
| if (eeprom_read(CONFIG_ZYNQ_GEM_EEPROM_ADDR, |
| CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET, |
| ethaddr, 6)) |
| printf("I2C EEPROM MAC address read failed\n"); |
| #endif |
| |
| return 0; |
| } |
| |
| #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE) |
| int dram_init_banksize(void) |
| { |
| return fdtdec_setup_memory_banksize(); |
| } |
| |
| int dram_init(void) |
| { |
| if (fdtdec_setup_memory_size() != 0) |
| return -EINVAL; |
| |
| zynq_ddrc_init(); |
| |
| return 0; |
| } |
| #else |
| int dram_init(void) |
| { |
| gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, |
| CONFIG_SYS_SDRAM_SIZE); |
| |
| zynq_ddrc_init(); |
| |
| return 0; |
| } |
| #endif |
| |
| #if defined(CONFIG_WATCHDOG) |
| /* Called by macro WATCHDOG_RESET */ |
| void watchdog_reset(void) |
| { |
| # if !defined(CONFIG_SPL_BUILD) |
| static ulong next_reset; |
| ulong now; |
| |
| if (!watchdog_dev) |
| return; |
| |
| now = timer_get_us(); |
| |
| /* Do not reset the watchdog too often */ |
| if (now > next_reset) { |
| wdt_reset(watchdog_dev); |
| next_reset = now + 1000; |
| } |
| # endif |
| } |
| #endif |