OMAP3+: Introduce generic logic for OMAP voltage controller
OMAP Voltage controller is used to generically talk to
PMICs on OMAP3,4,5 over I2C_SR. Instead of replicating code
in multiple SoC code, introduce a common voltage controller
logic which can be re-used from elsewhere.
With this change, we replace setup_sri2c with omap_vc_init which
has the same functionality, and replace the voltage scale
replication in do_scale_vcore and do_scale_tps62361 with
omap_vc_bypass_send_value. omap_vc_bypass_send_value can also
now be used with any configuration of PMIC.
NOTE: Voltage controller controlling I2C_SR is a write-only data
path, so no register read operation can be implemented.
Reported-by: Isabelle Gros <i-gros@ti.com>
Reported-by: Jerome Angeloni <j-angeloni@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
index cd304e8..4e93950 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -652,23 +652,9 @@
#define OMAP_SYS_CLK_IND_38_4_MHZ 6
#define OMAP_32K_CLK_FREQ 32768
-/* PRM_VC_CFG_I2C_CLK */
-#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT 0
-#define PRM_VC_CFG_I2C_CLK_SCLH_MASK 0xFF
-#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT 8
-#define PRM_VC_CFG_I2C_CLK_SCLL_MASK (0xFF << 8)
-
/* PRM_VC_VAL_BYPASS */
#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
-#define PRM_VC_VAL_BYPASS_VALID_BIT 0x1000000
-#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0
-#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F
-#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8
-#define PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF
-#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16
-#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF
-
/* SMPS */
#define SMPS_I2C_SLAVE_ADDR 0x12
#define SMPS_REG_ADDR_VCORE1 0x55
@@ -757,7 +743,6 @@
void do_scale_tps62361(u32 reg, u32 volt_mv);
u32 omap_ddr_clk(void);
void do_scale_vcore(u32 vcore_reg, u32 volt_mv);
-void setup_sri2c(void);
void setup_post_dividers(u32 *const base, const struct dpll_params *params);
u32 get_sys_clk_index(void);
void enable_basic_clocks(void);
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index b8dbc2c..101eb46 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -55,6 +55,8 @@
u32 cortex_rev(void);
void init_omap_revision(void);
void do_io_settings(void);
+void omap_vc_init(u16 speed_khz);
+int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
/*
* This is used to verify if the configuration header
* was executed by Romcode prior to control of transfer
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
index d0e6dd6..28b9ff7 100644
--- a/arch/arm/include/asm/arch-omap5/clocks.h
+++ b/arch/arm/include/asm/arch-omap5/clocks.h
@@ -615,23 +615,9 @@
#define OMAP_SYS_CLK_IND_38_4_MHZ 6
#define OMAP_32K_CLK_FREQ 32768
-/* PRM_VC_CFG_I2C_CLK */
-#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT 0
-#define PRM_VC_CFG_I2C_CLK_SCLH_MASK 0xFF
-#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT 8
-#define PRM_VC_CFG_I2C_CLK_SCLL_MASK (0xFF << 8)
-
/* PRM_VC_VAL_BYPASS */
#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
-#define PRM_VC_VAL_BYPASS_VALID_BIT 0x1000000
-#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0
-#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F
-#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8
-#define PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF
-#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16
-#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF
-
/* SMPS */
#define SMPS_I2C_SLAVE_ADDR 0x12
#define SMPS_REG_ADDR_VCORE1 0x55
@@ -703,7 +689,6 @@
void do_scale_tps62361(u32 reg, u32 volt_mv);
u32 omap_ddr_clk(void);
void do_scale_vcore(u32 vcore_reg, u32 volt_mv);
-void setup_sri2c(void);
void setup_post_dividers(u32 *const base, const struct dpll_params *params);
u32 get_sys_clk_index(void);
void enable_basic_clocks(void);
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index 40a7c57..3b39dbd 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -55,6 +55,8 @@
u32 cortex_rev(void);
void init_omap_revision(void);
void do_io_settings(void);
+void omap_vc_init(u16 speed_khz);
+int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
/*
* This is used to verify if the configuration header