include: axp_pmic: Include headers for all variants
A single DM-based driver should be able to support some feature for
several PMIC variants where the interface is the same. For example,
all PMIC variants use the same register bit to trigger poweroff.
However, currently only definitions for a single PMIC are available at
a time. This requires drivers to use #ifdefs and different indentifiers
for each variant they support.
Let's simplify this by making register definitions for all variants
available from the header. Then no preprocessor conditions are needed;
the driver can use the register definition from any variant that
supports the relevant feature.
An exception is the GPIO-related definitions, which do not use unique
identifiers. So for now, keep them like before. They will be cleaned up
along with the GPIO driver.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/include/axp152.h b/include/axp152.h
index c81f172..10d845f 100644
--- a/include/axp152.h
+++ b/include/axp152.h
@@ -15,6 +15,7 @@
#define AXP152_POWEROFF (1 << 7)
/* For axp_gpio.c */
+#ifdef CONFIG_AXP152_POWER
#define AXP_GPIO0_CTRL 0x90
#define AXP_GPIO1_CTRL 0x91
#define AXP_GPIO2_CTRL 0x92
@@ -24,3 +25,4 @@
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
#define AXP_GPIO_STATE 0x97
#define AXP_GPIO_STATE_OFFSET 0
+#endif
diff --git a/include/axp209.h b/include/axp209.h
index f4f1b2f..30399a8 100644
--- a/include/axp209.h
+++ b/include/axp209.h
@@ -74,6 +74,7 @@
#define AXP209_POWEROFF BIT(7)
/* For axp_gpio.c */
+#ifdef CONFIG_AXP209_POWER
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_VBUS_PRESENT BIT(5)
#define AXP_GPIO0_CTRL 0x90
@@ -84,3 +85,4 @@
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
#define AXP_GPIO_STATE 0x94
#define AXP_GPIO_STATE_OFFSET 4
+#endif
diff --git a/include/axp221.h b/include/axp221.h
index caffb91..a02e9b4 100644
--- a/include/axp221.h
+++ b/include/axp221.h
@@ -50,6 +50,7 @@
#define AXP221_SID 0x20
/* For axp_gpio.c */
+#ifdef CONFIG_AXP221_POWER
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
#define AXP_VBUS_IPSOUT 0x30
@@ -63,3 +64,4 @@
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
#define AXP_GPIO_STATE 0x94
#define AXP_GPIO_STATE_OFFSET 0
+#endif
diff --git a/include/axp809.h b/include/axp809.h
index 86b2925..430dbef 100644
--- a/include/axp809.h
+++ b/include/axp809.h
@@ -44,6 +44,7 @@
#define AXP809_SHUTDOWN_POWEROFF (1 << 7)
/* For axp_gpio.c */
+#ifdef CONFIG_AXP809_POWER
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
#define AXP_VBUS_IPSOUT 0x30
@@ -57,3 +58,4 @@
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
#define AXP_GPIO_STATE 0x94
#define AXP_GPIO_STATE_OFFSET 0
+#endif
diff --git a/include/axp818.h b/include/axp818.h
index b16fe0b..8bac6b6 100644
--- a/include/axp818.h
+++ b/include/axp818.h
@@ -58,6 +58,7 @@
#define AXP818_SHUTDOWN_POWEROFF (1 << 7)
/* For axp_gpio.c */
+#ifdef CONFIG_AXP818_POWER
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
#define AXP_VBUS_IPSOUT 0x30
@@ -71,3 +72,4 @@
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
#define AXP_GPIO_STATE 0x94
#define AXP_GPIO_STATE_OFFSET 0
+#endif
diff --git a/include/axp_pmic.h b/include/axp_pmic.h
index 2eab189..01ebba6 100644
--- a/include/axp_pmic.h
+++ b/include/axp_pmic.h
@@ -9,24 +9,12 @@
#include <stdbool.h>
-#ifdef CONFIG_AXP152_POWER
#include <axp152.h>
-#endif
-#ifdef CONFIG_AXP209_POWER
#include <axp209.h>
-#endif
-#ifdef CONFIG_AXP221_POWER
#include <axp221.h>
-#endif
-#ifdef CONFIG_AXP305_POWER
#include <axp305.h>
-#endif
-#ifdef CONFIG_AXP809_POWER
#include <axp809.h>
-#endif
-#ifdef CONFIG_AXP818_POWER
#include <axp818.h>
-#endif
#define AXP_PMIC_MODE_REG 0x3e
#define AXP_PMIC_MODE_I2C 0x00