dma: Add i.MX6 support to drivers/dma/apbh_dma.c
This will be used by the i.MX6 NAND support.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 09be974..0e4d8fa 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -45,6 +45,11 @@
#define DTCP_ARB_BASE_ADDR 0x00138000
#define DTCP_ARB_END_ADDR 0x0013BFFF
#endif /* CONFIG_MX6SL */
+
+#define MXS_APBH_BASE APBH_DMA_ARB_BASE_ADDR
+#define MXS_GPMI_BASE (APBH_DMA_ARB_BASE_ADDR + 0x02000)
+#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000)
+
/* GPV - PL301 configuration ports */
#ifdef CONFIG_MX6SL
#define GPV2_BASE_ADDR 0x00D00000
diff --git a/arch/arm/include/asm/imx-common/dma.h b/arch/arm/include/asm/imx-common/dma.h
index 1ac8696..cb74528 100644
--- a/arch/arm/include/asm/imx-common/dma.h
+++ b/arch/arm/include/asm/imx-common/dma.h
@@ -72,6 +72,18 @@
MXS_DMA_CHANNEL_AHB_APBH_RESERVED1,
MXS_MAX_DMA_CHANNELS,
};
+#elif defined(CONFIG_MX6)
+enum {
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI0 = 0,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI2,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI3,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI4,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI5,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI6,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI7,
+ MXS_MAX_DMA_CHANNELS,
+};
#endif
/*
diff --git a/arch/arm/include/asm/imx-common/regs-apbh.h b/arch/arm/include/asm/imx-common/regs-apbh.h
index a5de927..bcec6e0 100644
--- a/arch/arm/include/asm/imx-common/regs-apbh.h
+++ b/arch/arm/include/asm/imx-common/regs-apbh.h
@@ -109,7 +109,7 @@
mxs_reg_32(hw_apbh_version)
};
-#elif defined(CONFIG_MX28)
+#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6))
struct mxs_apbh_regs {
mxs_reg_32(hw_apbh_ctrl0)
mxs_reg_32(hw_apbh_ctrl1)
@@ -288,6 +288,17 @@
#define APBH_CTRL0_CLKGATE_CHANNEL_NAND7 0x0800
#define APBH_CTRL0_CLKGATE_CHANNEL_HSADC 0x1000
#define APBH_CTRL0_CLKGATE_CHANNEL_LCDIF 0x2000
+#elif defined(CONFIG_MX6)
+#define APBH_CTRL0_CLKGATE_CHANNEL_OFFSET 0
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND0 0x0001
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND1 0x0002
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND2 0x0004
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND3 0x0008
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND4 0x0010
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND5 0x0020
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND6 0x0040
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND7 0x0080
+#define APBH_CTRL0_CLKGATE_CHANNEL_SSP 0x0100
#endif
#define APBH_CTRL1_CH15_CMDCMPLT_IRQ_EN (1 << 31)
@@ -393,6 +404,10 @@
#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_LCDIF 0x2000
#endif
+#if defined(CONFIG_MX6)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET 16
+#endif
+
#if defined(CONFIG_MX23)
#define APBH_DEVSEL_CH7_MASK (0xf << 28)
#define APBH_DEVSEL_CH7_OFFSET 28
diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c
index eb46bcf..510cb28 100644
--- a/drivers/dma/apbh_dma.c
+++ b/drivers/dma/apbh_dma.c
@@ -227,7 +227,7 @@
#if defined(CONFIG_MX23)
uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_ctrl0_set);
uint32_t offset = APBH_CTRL0_RESET_CHANNEL_OFFSET;
-#elif defined(CONFIG_MX28)
+#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6))
uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_channel_ctrl_set);
uint32_t offset = APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET;
#endif