powerpc: C29X: Move CONFIG_PPC_C29X to Kconfig option
Replace CONFIG_PPC_C29X with ARCH_C29X in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 4fd2ea6..640c846 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -33,6 +33,7 @@
config TARGET_C29XPCIE
bool "Support C29XPCIE"
+ select ARCH_C29X
select SUPPORT_SPL
select SUPPORT_TPL
select PHYS_64BIT
@@ -185,6 +186,9 @@
config ARCH_BSC9132
bool
+config ARCH_C29X
+ bool
+
config ARCH_MPC8544
bool
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index e545112..bfff58e 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -65,7 +65,7 @@
obj-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o
# SoC specific SERDES support
-obj-$(CONFIG_PPC_C29X) += c29x_serdes.o
+obj-$(CONFIG_ARCH_C29X) += c29x_serdes.o
obj-$(CONFIG_MPC8536) += mpc8536_serdes.o
obj-$(CONFIG_ARCH_MPC8544) += mpc8544_serdes.o
obj-$(CONFIG_ARCH_MPC8548) += mpc8548_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index dfea750..c2402a8 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -959,7 +959,7 @@
#ifdef CONFIG_FSL_CAAM
sec_init();
-#if defined(CONFIG_PPC_C29X)
+#if defined(CONFIG_ARCH_C29X)
if ((SVR_SOC_VER(svr) == SVR_C292) ||
(SVR_SOC_VER(svr) == SVR_C293))
sec_init_idx(1);
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 80b3b74..77e3f83 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -914,7 +914,7 @@
#define CONFIG_SYS_FSL_SFP_VER_3_0
-#elif defined(CONFIG_PPC_C29X)
+#elif defined(CONFIG_ARCH_C29X)
#define CONFIG_MAX_CPUS 1
#define CONFIG_FSL_SDHC_V2_3
#define CONFIG_SYS_FSL_NUM_LAWS 12
@@ -955,7 +955,7 @@
#define CONFIG_SYS_FSL_DDRC_GEN3
#endif
-#if !defined(CONFIG_PPC_C29X)
+#if !defined(CONFIG_ARCH_C29X)
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
#endif
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 74c2959..cef9da0 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2123,7 +2123,7 @@
#ifdef CONFIG_MPC8536
#define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000
#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25
-#elif defined(CONFIG_PPC_C29X)
+#elif defined(CONFIG_ARCH_C29X)
#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00
#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT (9 - ((gur->pordevsr2 \
& MPC85xx_PORDEVSR2_DDR_SPD_0) \
@@ -2175,7 +2175,7 @@
#elif defined(CONFIG_ARCH_BSC9132)
#define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000
#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17
-#elif defined(CONFIG_PPC_C29X)
+#elif defined(CONFIG_ARCH_C29X)
#define MPC85xx_PORDEVSR_IO_SEL 0x00e00000
#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21
#else
@@ -2193,7 +2193,7 @@
#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
u32 pordbgmsr; /* POR debug mode status */
u32 pordevsr2; /* POR I/O device status 2 */
-#if defined(CONFIG_PPC_C29X)
+#if defined(CONFIG_ARCH_C29X)
#define MPC85xx_PORDEVSR2_DDR_SPD_0 0x00000008
#define MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT 3
#endif
@@ -2344,7 +2344,7 @@
#define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000
#define MPC85xx_PMUXCR0_SIM_SEL 0x00014000
#endif
-#if defined(CONFIG_PPC_C29X)
+#if defined(CONFIG_ARCH_C29X)
#define MPC85xx_PMUXCR_SPI_MASK 0x00000300
#define MPC85xx_PMUXCR_SPI 0x00000000
#define MPC85xx_PMUXCR_SPI_GPIO 0x00000100
@@ -2964,7 +2964,7 @@
#endif
#define CONFIG_SYS_MDIO1_OFFSET 0x24000
#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000
-#if defined(CONFIG_PPC_C29X)
+#if defined(CONFIG_ARCH_C29X)
#define CONFIG_SYS_FSL_SEC_OFFSET 0x80000
#define CONFIG_SYS_FSL_JR0_OFFSET 0x81000
#else
diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
index 4a8cc32..1b88229 100644
--- a/drivers/crypto/fsl/jr.c
+++ b/drivers/crypto/fsl/jr.c
@@ -21,7 +21,7 @@
uint32_t sec_offset[CONFIG_SYS_FSL_MAX_NUM_OF_SEC] = {
0,
-#if defined(CONFIG_PPC_C29X)
+#if defined(CONFIG_ARCH_C29X)
CONFIG_SYS_FSL_SEC_IDX_OFFSET,
2 * CONFIG_SYS_FSL_SEC_IDX_OFFSET
#endif
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index 41dde82..39eefb4 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -11,10 +11,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#ifdef CONFIG_C29XPCIE
-#define CONFIG_PPC_C29X
-#endif
-
#ifdef CONFIG_SPIFLASH
#define CONFIG_RAMBOOT_SPIFLASH
#define CONFIG_SYS_TEXT_BASE 0x11000000
diff --git a/include/fsl_sec.h b/include/fsl_sec.h
index bffabc8..e6080d4 100644
--- a/include/fsl_sec.h
+++ b/include/fsl_sec.h
@@ -303,7 +303,7 @@
*/
int blob_dek(const u8 *src, u8 *dst, u8 len);
-#if defined(CONFIG_PPC_C29X)
+#if defined(CONFIG_ARCH_C29X)
int sec_init_idx(uint8_t);
#endif
int sec_init(void);
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 1276b45..ad34de4 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3682,7 +3682,6 @@
CONFIG_PPC64BRIDGE
CONFIG_PPC_B4420
CONFIG_PPC_B4860
-CONFIG_PPC_C29X
CONFIG_PPC_CLUSTER_START
CONFIG_PPC_P2041
CONFIG_PPC_P3041