arm: bcmbca: add bcm4912 SoC support
BCM4912 is a Broadcom B53 based WLAN AP router SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.
This SoC is supported in the linux-next git repository so the dts
and dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
diff --git a/arch/arm/mach-bcmbca/bcm4912/Kconfig b/arch/arm/mach-bcmbca/bcm4912/Kconfig
new file mode 100644
index 0000000..b8c14d1
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm4912/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM4912
+
+config TARGET_BCM94912
+ bool "Broadcom 4912 Reference Board"
+ depends on ARCH_BCMBCA
+
+config SYS_SOC
+ default "bcm4912"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
diff --git a/arch/arm/mach-bcmbca/bcm4912/Makefile b/arch/arm/mach-bcmbca/bcm4912/Makefile
new file mode 100644
index 0000000..6262497
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm4912/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj-y += mmu_table.o
diff --git a/arch/arm/mach-bcmbca/bcm4912/mmu_table.c b/arch/arm/mach-bcmbca/bcm4912/mmu_table.c
new file mode 100644
index 0000000..52a53a2
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm4912/mmu_table.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+#include <common.h>
+#include <asm/armv8/mmu.h>
+#include <linux/sizes.h>
+
+static struct mm_region bcm94912_mem_map[] = {
+ {
+ .virt = 0x00000000UL,
+ .phys = 0x00000000UL,
+ .size = 1UL * SZ_1G,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ },
+ {
+ /* SoC peripheral */
+ .virt = 0xff800000UL,
+ .phys = 0xff800000UL,
+ .size = 0x100000,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ },
+ {
+ /* List terminator */
+ 0,
+ }
+};
+
+struct mm_region *mem_map = bcm94912_mem_map;