doc: board: Add Intel Cougar Canyon 2 board doc
This extracts Intel Cougar Canyon 2 board specific information from
README.x86, converts plain text documentation to reST format and
adds it to Sphinx TOC tree. No essential content change.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/doc/README.x86 b/doc/README.x86
index 8e549c3..5e85b57 100644
--- a/doc/README.x86
+++ b/doc/README.x86
@@ -203,29 +203,6 @@
---
-Intel Cougar Canyon 2 specific instructions for bare mode:
-
-This uses Intel FSP for 3rd generation Intel Core and Intel Celeron processors
-with mobile Intel HM76 and QM77 chipsets platform. Download it from Intel FSP
-website and put the .fd file (CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd at the
-time of writing) in the board directory and rename it to fsp.bin.
-
-Now build U-Boot and obtain u-boot.rom
-
-$ make cougarcanyon2_defconfig
-$ make all
-
-The board has two 8MB SPI flashes mounted, which are called SPI-0 and SPI-1 in
-the board manual. The SPI-0 flash should have flash descriptor plus ME firmware
-and SPI-1 flash is used to store U-Boot. For convenience, the complete 8MB SPI-0
-flash image is included in the FSP package (named Rom00_8M_MB_PPT.bin). Program
-this image to the SPI-0 flash according to the board manual just once and we are
-all set. For programming U-Boot we just need to program SPI-1 flash. Since the
-default u-boot.rom image for this board is set to 2MB, it should be programmed
-to the last 2MB of the 8MB chip, address range [600000, 7FFFFF].
-
----
-
Intel Galileo instructions for bare mode:
Only one binary blob is needed for Remote Management Unit (RMU) within Intel
diff --git a/doc/board/intel/cougarcanyon2.rst b/doc/board/intel/cougarcanyon2.rst
new file mode 100644
index 0000000..5e3e7a1
--- /dev/null
+++ b/doc/board/intel/cougarcanyon2.rst
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. sectionauthor:: Bin Meng <bmeng.cn@gmail.com>
+
+Cougar Canyon 2 CRB
+===================
+
+This uses Intel FSP for 3rd generation Intel Core and Intel Celeron processors
+with mobile Intel HM76 and QM77 chipsets platform. Download it from Intel FSP
+website and put the .fd file (CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd at the
+time of writing) in the board directory and rename it to fsp.bin.
+
+Now build U-Boot and obtain u-boot.rom::
+
+ $ make cougarcanyon2_defconfig
+ $ make all
+
+The board has two 8MB SPI flashes mounted, which are called SPI-0 and SPI-1 in
+the board manual. The SPI-0 flash should have flash descriptor plus ME firmware
+and SPI-1 flash is used to store U-Boot. For convenience, the complete 8MB SPI-0
+flash image is included in the FSP package (named Rom00_8M_MB_PPT.bin). Program
+this image to the SPI-0 flash according to the board manual just once and we are
+all set. For programming U-Boot we just need to program SPI-1 flash. Since the
+default u-boot.rom image for this board is set to 2MB, it should be programmed
+to the last 2MB of the 8MB chip, address range [600000, 7FFFFF].
diff --git a/doc/board/intel/index.rst b/doc/board/intel/index.rst
index d30debb..521e6e6 100644
--- a/doc/board/intel/index.rst
+++ b/doc/board/intel/index.rst
@@ -8,5 +8,6 @@
bayleybay
cherryhill
+ cougarcanyon2
crownbay
minnowmax