Various USB related patches
- Add support for mpc8xx USB device.
- Add support for Common Device Class - Abstract Control Model USB console.
- Add support for flow control in USB slave devices.
- Add support for switching between gserial and cdc_acm using environment.
- Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
- Update usbcore slightly to ease host enumeration.
- Fix non-portable endian problems in usbdcore and usbdcore_ep0.
- Add AdderUSB_config as a defconfig to enable usage of the USB console
by default with the Adder87x U-Boot port.
Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
diff --git a/drivers/usbdcore_mpc8xx.c b/drivers/usbdcore_mpc8xx.c
new file mode 100644
index 0000000..9bd2c23
--- /dev/null
+++ b/drivers/usbdcore_mpc8xx.c
@@ -0,0 +1,1412 @@
+/*
+ * Copyright (C) 2006 by Bryan O'Donoghue, CodeHermit
+ * bodonoghue@CodeHermit.ie
+ *
+ * References
+ * DasUBoot/drivers/usbdcore_omap1510.c, for design and implementation ideas.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+/*
+ * Notes :
+ * 1. #define __SIMULATE_ERROR__ to inject a CRC error into every 2nd TX
+ * packet to force the USB re-transmit protocol.
+ *
+ * 2. #define __DEBUG_UDC__ to switch on debug tracing to serial console
+ * be careful that tracing doesn't create Hiesen-bugs with respect to
+ * response timeouts to control requests.
+ *
+ * 3. This driver should be able to support any higher level driver that
+ * that wants to do either of the two standard UDC implementations
+ * Control-Bulk-Interrupt or Bulk-IN/Bulk-Out standards. Hence
+ * gserial and cdc_acm should work with this code.
+ *
+ * 4. NAK events never actually get raised at all, the documentation
+ * is just wrong !
+ *
+ * 5. For some reason, cbd_datlen is *always* +2 the value it should be.
+ * this means that having an RX cbd of 16 bytes is not possible, since
+ * the same size is reported for 14 bytes received as 16 bytes received
+ * until we can find out why this happens, RX cbds must be limited to 8
+ * bytes. TODO: check errata for this behaviour.
+ *
+ * 6. Right now this code doesn't support properly powering up with the USB
+ * cable attached to the USB host my development board the Adder87x doesn't
+ * have a pull-up fitted to allow this, so it is necessary to power the
+ * board and *then* attached the USB cable to the host. However somebody
+ * with a different design in their board may be able to keep the cable
+ * constantly connected and simply enable/disable a pull-up re
+ * figure 31.1 in MPC885RM.pdf instead of having to power up the board and
+ * then attach the cable !
+ *
+ */
+#include <common.h>
+#include <config.h>
+
+#if defined(CONFIG_MPC885_FAMILY) && defined(CONFIG_USB_DEVICE)
+#include <commproc.h>
+#include "usbdcore.h"
+#include "usbdcore_mpc8xx.h"
+#include "usbdcore_ep0.h"
+
+#define ERR(fmt, args...)\
+ serial_printf("ERROR : [%s] %s:%d: "fmt,\
+ __FILE__,__FUNCTION__,__LINE__, ##args)
+#ifdef __DEBUG_UDC__
+ #define DBG(fmt,args...)\
+ serial_printf("[%s] %s:%d: "fmt,\
+ __FILE__,__FUNCTION__,__LINE__, ##args)
+#else
+ #define DBG(fmt,args...)
+#endif
+
+/* Static Data */
+#ifdef __SIMULATE_ERROR__
+ static char err_poison_test = 0;
+#endif
+static struct mpc8xx_ep ep_ref[MAX_ENDPOINTS];
+static u32 address_base = STATE_NOT_READY;
+static mpc8xx_udc_state_t udc_state = 0;
+static struct usb_device_instance *udc_device = 0;
+static volatile usb_epb_t *endpoints[MAX_ENDPOINTS];
+static volatile cbd_t * tx_cbd[TX_RING_SIZE];
+static volatile cbd_t * rx_cbd[RX_RING_SIZE];
+static volatile immap_t *immr = 0;
+static volatile cpm8xx_t *cp = 0;
+static volatile usb_pram_t *usb_paramp = 0;
+static volatile usb_t *usbp = 0;
+static int rx_ct = 0;
+static int tx_ct = 0;
+
+/* Static Function Declarations */
+static void mpc8xx_udc_state_transition_up (usb_device_state_t initial,
+ usb_device_state_t final);
+static void mpc8xx_udc_state_transition_down (usb_device_state_t initial,
+ usb_device_state_t final);
+static void mpc8xx_udc_stall (unsigned int ep);
+static void mpc8xx_udc_flush_tx_fifo(int epid);
+static void mpc8xx_udc_flush_rx_fifo(void);
+static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_init_tx(struct usb_endpoint_instance *epi,
+ struct urb * tx_urb);
+static void mpc8xx_udc_dump_request(struct usb_device_request *request);
+static void mpc8xx_udc_clock_init (volatile immap_t * immr,
+ volatile cpm8xx_t * cp);
+static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi);
+static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_ep0_rx(volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_cbd_init (void);
+static void mpc8xx_udc_endpoint_init (void);
+static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size);
+static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment);
+static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_set_nak (unsigned int ep);
+static short mpc8xx_udc_handle_txerr(void);
+static void mpc8xx_udc_advance_rx(volatile cbd_t ** rx_cbdp, int epid);
+
+/******************************************************************************
+ Global Linkage
+ *****************************************************************************/
+
+/* udc_init
+ *
+ * Do initial bus gluing
+ */
+int udc_init(void)
+{
+ /* Init various pointers */
+ immr = (immap_t *) CFG_IMMR;
+ cp = (cpm8xx_t *)&(immr->im_cpm);
+ usb_paramp = (usb_pram_t*)&(cp->cp_dparam[PROFF_USB]);
+ usbp = (usb_t *) &(cp->cp_scc[0]);
+
+ memset(ep_ref, 0x00, (sizeof(struct mpc8xx_ep) * MAX_ENDPOINTS));
+
+ udc_device = 0;
+ udc_state = STATE_NOT_READY;
+
+ usbp->usmod= 0x00;
+ usbp->uscom= 0;
+
+ /* Set USB Frame #0, Respond at Address & Get a clock source */
+ usbp->usaddr = 0x00;
+ mpc8xx_udc_clock_init (immr, cp);
+
+ /* PA15, PA14 as perhiperal USBRXD and USBOE */
+ immr->im_ioport.iop_padir&= ~0x0003;
+ immr->im_ioport.iop_papar|= 0x0003;
+
+ /* PC11/PC10 as peripheral USBRXP USBRXN */
+ immr->im_ioport.iop_pcso|= 0x0030;
+
+ /* PC7/PC6 as perhiperal USBTXP and USBTXN */
+ immr->im_ioport.iop_pcdir|= 0x0300;
+ immr->im_ioport.iop_pcpar|= 0x0300;
+
+ /* Set the base address */
+ address_base = (u32)(cp->cp_dpmem + CPM_USB_BASE);
+
+ /* Initialise endpoints and circular buffers */
+ mpc8xx_udc_endpoint_init();
+ mpc8xx_udc_cbd_init();
+
+ /* Assign allocated Dual Port Endpoint descriptors */
+ usb_paramp->ep0ptr = (u32)endpoints[0];
+ usb_paramp->ep1ptr = (u32)endpoints[1];
+ usb_paramp->ep2ptr = (u32)endpoints[2];
+ usb_paramp->ep3ptr = (u32)endpoints[3];
+ usb_paramp->frame_n = 0;
+
+ DBG("ep0ptr=0x%08x ep1ptr=0x%08x ep2ptr=0x%08x ep3ptr=0x%08x\n",
+ usb_paramp->ep0ptr, usb_paramp->ep1ptr, usb_paramp->ep2ptr,
+ usb_paramp->ep3ptr);
+
+ return 0;
+}
+
+/* udc_irq
+ *
+ * Poll for whatever events may have occured
+ */
+void udc_irq(void)
+{
+ int epid = 0;
+ volatile cbd_t * rx_cbdp = 0;
+ volatile cbd_t * rx_cbdp_base = 0;
+
+ if(udc_state!=STATE_READY){
+ return;
+ }
+
+ if(usbp->usber&USB_E_BSY){
+ /* This shouldn't happen. If it does then it's a bug ! */
+ usbp->usber|=USB_E_BSY;
+ mpc8xx_udc_flush_rx_fifo();
+ }
+
+
+ /* Scan all RX/Bidirectional Endpoints for RX data. */
+ for(epid = 0; epid<MAX_ENDPOINTS; epid++){
+
+ if(!ep_ref[epid].prx){
+ continue;
+ }
+
+ rx_cbdp = rx_cbdp_base = ep_ref[epid].prx;
+ do{
+ if(!(rx_cbdp->cbd_sc&RX_BD_E)){
+
+ if(rx_cbdp->cbd_sc&0x1F){
+ /* Corrupt data discard it.
+ * Controller has NAK'd this packet.
+ */
+ mpc8xx_udc_clear_rxbd(rx_cbdp);
+
+ }else{
+ if(!epid){
+ mpc8xx_udc_ep0_rx(rx_cbdp);
+
+ }else{
+ /* Process data */
+ mpc8xx_udc_set_nak(epid);
+ mpc8xx_udc_epn_rx(epid,rx_cbdp);
+ mpc8xx_udc_clear_rxbd(rx_cbdp);
+ }
+ }
+
+ /* Advance RX CBD pointer */
+ mpc8xx_udc_advance_rx(&rx_cbdp, epid);
+ ep_ref[epid].prx = rx_cbdp;
+ }else{
+ /* Advance RX CBD pointer */
+ mpc8xx_udc_advance_rx(&rx_cbdp, epid);
+ }
+
+ }while(rx_cbdp != rx_cbdp_base);
+ }
+
+ /* Handle TX events as appropiate, the correct place to do this is
+ * in a tx routine. Perhaps TX on epn was pre-empted by ep0
+ */
+
+ if(usbp->usber&USB_E_TXB){
+ usbp->usber|=USB_E_TXB;
+ }
+
+ if(usbp->usber&(USB_TX_ERRMASK)){
+ mpc8xx_udc_handle_txerr();
+ }
+
+ /* Switch to the default state, respond at the default address */
+ if(usbp->usber&USB_E_RESET){
+ usbp->usber|=USB_E_RESET;
+ usbp->usaddr = 0x00;
+ udc_device->device_state = STATE_DEFAULT;
+ }
+
+ /*if(usbp->usber&USB_E_IDLE){
+ We could suspend here !
+ usbp->usber|=USB_E_IDLE;
+ DBG("idle state change\n");
+ }
+ if(usbp->usbs){
+ We could resume here when IDLE is deasserted !
+ Not worth doing, so long as we are self powered though.
+ }*/
+
+ return;
+}
+
+
+
+/* udc_endpoint_write
+ *
+ * Write some data to an endpoint
+ */
+int udc_endpoint_write(struct usb_endpoint_instance *epi)
+{
+ int ep = 0;
+ short epid = 1, unnak = 0, ret = 0;
+
+ if(udc_state != STATE_READY){
+ ERR("invalid udc_state != STATE_READY!\n");
+ return -1;
+ }
+
+ if(!udc_device || !epi){
+ return -1;
+ }
+
+ if(udc_device->device_state!=STATE_CONFIGURED){
+ return -1;
+ }
+
+ ep = epi->endpoint_address & 0x03;
+ if(ep >= MAX_ENDPOINTS){
+ return -1;
+ }
+
+ /* Set NAK for all RX endpoints during TX */
+ for(epid = 1; epid<MAX_ENDPOINTS; epid++){
+
+ /* Don't set NAK on DATA IN/CONTROL endpoints */
+ if(ep_ref[epid].sc & USB_DIR_IN){
+ continue;
+ }
+
+ if(!(usbp->usep[epid]&( USEP_THS_NAK | USEP_RHS_NAK ))){
+ unnak |= 1<<epid;
+ }
+
+ mpc8xx_udc_set_nak(epid);
+ }
+
+ mpc8xx_udc_init_tx(&udc_device->bus->endpoint_array[ep],epi->tx_urb);
+ ret = mpc8xx_udc_ep_tx(&udc_device->bus->endpoint_array[ep]);
+
+ /* Remove temporary NAK */
+ for(epid = 1; epid<MAX_ENDPOINTS; epid++){
+ if(unnak&(1<<epid)){
+ udc_unset_nak(epid);
+ }
+ }
+
+ return ret;
+}
+
+/* mpc8xx_udc_assign_urb
+ *
+ * Associate a given urb to an endpoint TX or RX transmit/receive buffers
+ */
+static int mpc8xx_udc_assign_urb(int ep, char direction)
+{
+ struct usb_endpoint_instance *epi = 0;
+
+ if(ep >= MAX_ENDPOINTS){
+ goto err;
+ }
+ epi = &udc_device->bus->endpoint_array[ep];
+ if(!epi){
+ goto err;
+ }
+
+ if(!ep_ref[ep].urb){
+ ep_ref[ep].urb = usbd_alloc_urb(udc_device,
+ udc_device->bus->endpoint_array);
+ if(!ep_ref[ep].urb){
+ goto err;
+ }
+ }else{
+ ep_ref[ep].urb->actual_length = 0;
+ }
+
+ switch(direction){
+ case USB_DIR_IN:
+ epi->tx_urb = ep_ref[ep].urb;
+ break;
+ case USB_DIR_OUT:
+ epi->rcv_urb = ep_ref[ep].urb;
+ break;
+ default:
+ goto err;
+ }
+ return 0;
+
+err:
+ udc_state = STATE_ERROR;
+ return -1;
+}
+
+/* udc_setup_ep
+ *
+ * Associate U-Boot software endpoints to mpc8xx endpoint parameter ram
+ * Isochronous endpoints aren't yet supported!
+ */
+void udc_setup_ep(struct usb_device_instance *device, unsigned int ep,
+ struct usb_endpoint_instance *epi)
+{
+ uchar direction = 0;
+ int ep_attrib = 0;
+
+ if(epi && (ep < MAX_ENDPOINTS)){
+
+ if(ep == 0){
+ if (epi->rcv_attributes!=USB_ENDPOINT_XFER_CONTROL
+ ||epi->tx_attributes!=
+ USB_ENDPOINT_XFER_CONTROL){
+
+ /* ep0 must be a control endpoint*/
+ udc_state = STATE_ERROR;
+ return;
+
+ }
+ if(!(ep_ref[ep].sc & EP_ATTACHED)){
+ mpc8xx_udc_cbd_attach (ep, epi->tx_packetSize,
+ epi->rcv_packetSize);
+ }
+ usbp->usep[ep] = 0x0000;
+ return;
+ }
+
+ if ((epi->endpoint_address & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_IN) {
+
+ direction = 1;
+ ep_attrib = epi->tx_attributes;
+ epi->rcv_packetSize = 0;
+ ep_ref[ep].sc |= USB_DIR_IN;
+ } else {
+
+ direction = 0;
+ ep_attrib = epi->rcv_attributes;
+ epi->tx_packetSize = 0;
+ ep_ref[ep].sc &= ~USB_DIR_IN;
+ }
+
+ if(mpc8xx_udc_assign_urb(ep, epi->endpoint_address
+ &USB_ENDPOINT_DIR_MASK)){
+ return;
+ }
+
+ switch(ep_attrib){
+ case USB_ENDPOINT_XFER_CONTROL:
+ if(!(ep_ref[ep].sc & EP_ATTACHED)){
+ mpc8xx_udc_cbd_attach (ep,
+ epi->tx_packetSize,
+ epi->rcv_packetSize);
+ }
+ usbp->usep[ep] = ep<<12;
+ epi->rcv_urb = epi->tx_urb = ep_ref[ep].urb;
+
+ break;
+ case USB_ENDPOINT_XFER_BULK :
+ case USB_ENDPOINT_XFER_INT:
+ if(!(ep_ref[ep].sc & EP_ATTACHED)){
+ if(direction){
+ mpc8xx_udc_cbd_attach (ep,
+ epi->tx_packetSize, 0);
+ }else{
+ mpc8xx_udc_cbd_attach (ep,
+ 0, epi->rcv_packetSize);
+ }
+ }
+ usbp->usep[ep]= (ep<<12)|((ep_attrib)<<8);
+
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ default:
+ serial_printf("Error endpoint attrib %d>3\n",
+ ep_attrib);
+ udc_state = STATE_ERROR;
+ break;
+ }
+ }
+
+}
+
+/* udc_connect
+ *
+ * Move state, switch on the USB
+ */
+void udc_connect(void)
+{
+ /* Enable pull-up resistor on D+
+ * TODO: fit a pull-up resistor to drive SE0 for > 2.5us
+ */
+
+ if(udc_state!=STATE_ERROR){
+ udc_state = STATE_READY;
+ usbp->usmod|= USMOD_EN;
+ }
+}
+
+/* udc_disconnect
+ *
+ * Disconnect is not used but, is included for completeness
+ */
+void udc_disconnect(void)
+{
+ /* Disable pull-up resistor on D-
+ * TODO: fix a pullup resistor to control this
+ */
+
+ if(udc_state!=STATE_ERROR){
+ udc_state = STATE_NOT_READY;
+ }
+ usbp->usmod&=~USMOD_EN;
+}
+
+/* udc_enable
+ *
+ * Grab an EP0 URB, register interest in a subset of USB events
+ */
+void udc_enable(struct usb_device_instance *device)
+{
+ if(udc_state == STATE_ERROR){
+ return;
+ }
+
+ udc_device = device;
+
+ if(!ep_ref[0].urb){
+ ep_ref[0].urb = usbd_alloc_urb(device,
+ device->bus->endpoint_array);
+ }
+
+ /* Register interest in all events except SOF, enable transceiver */
+ usbp->usber= 0x03FF;
+ usbp->usbmr= 0x02F7;
+
+ return;
+}
+
+/* udc_disable
+ *
+ * disable the currently hooked device
+ */
+void udc_disable(void)
+{
+ int i = 0;
+
+ if(udc_state == STATE_ERROR){
+ DBG("Won't disable UDC. udc_state==STATE_ERROR !\n");
+ return;
+ }
+
+ udc_device = 0;
+
+ for(;i<MAX_ENDPOINTS; i++){
+ if(ep_ref[i].urb){
+ usbd_dealloc_urb(ep_ref[i].urb);
+ ep_ref[i].urb = 0;
+ }
+ }
+
+ usbp->usbmr= 0x00;
+ usbp->usmod= ~USMOD_EN;
+ udc_state = STATE_NOT_READY;
+}
+
+/* udc_startup_events
+ *
+ * Enable the specified device
+ */
+void udc_startup_events(struct usb_device_instance *device)
+{
+ udc_enable(device);
+ if(udc_state == STATE_READY){
+ usbd_device_event_irq (device, DEVICE_CREATE, 0);
+ }
+}
+
+/* udc_set_nak
+ *
+ * Allow upper layers to signal lower layers should not accept more RX data
+ *
+ */
+void udc_set_nak(int epid)
+{
+ if(epid){
+ mpc8xx_udc_set_nak(epid);
+ }
+}
+
+/* udc_unset_nak
+ *
+ * Suspend sending of NAK tokens for DATA OUT tokens on a given endpoint.
+ * Switch off NAKing on this endpoint to accept more data output from host.
+ *
+ */
+void udc_unset_nak (int epid)
+{
+ if(epid > MAX_ENDPOINTS){
+ return;
+ }
+
+ if(usbp->usep[epid]&(USEP_THS_NAK | USEP_RHS_NAK)){
+ usbp->usep[epid]&= ~(USEP_THS_NAK | USEP_RHS_NAK);
+ __asm__ ("eieio");
+ }
+}
+
+/******************************************************************************
+ Static Linkage
+******************************************************************************/
+
+/* udc_state_transition_up
+ * udc_state_transition_down
+ *
+ * Helper functions to implement device state changes. The device states and
+ * the events that transition between them are:
+ *
+ * STATE_ATTACHED
+ * || /\
+ * \/ ||
+ * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET
+ * || /\
+ * \/ ||
+ * STATE_POWERED
+ * || /\
+ * \/ ||
+ * DEVICE_RESET DEVICE_POWER_INTERRUPTION
+ * || /\
+ * \/ ||
+ * STATE_DEFAULT
+ * || /\
+ * \/ ||
+ * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET
+ * || /\
+ * \/ ||
+ * STATE_ADDRESSED
+ * || /\
+ * \/ ||
+ * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED
+ * || /\
+ * \/ ||
+ * STATE_CONFIGURED
+ *
+ * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED
+ * to STATE_CONFIGURED) from the specified initial state to the specified final
+ * state, passing through each intermediate state on the way. If the initial
+ * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then
+ * no state transitions will take place.
+ *
+ * udc_state_transition_down transitions down (in the direction from
+ * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the
+ * specified final state, passing through each intermediate state on the way.
+ * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final
+ * state, then no state transitions will take place.
+ *
+ */
+
+static void mpc8xx_udc_state_transition_up (usb_device_state_t initial,
+ usb_device_state_t final)
+{
+ if (initial < final) {
+ switch (initial) {
+ case STATE_ATTACHED:
+ usbd_device_event_irq (udc_device,
+ DEVICE_HUB_CONFIGURED, 0);
+ if (final == STATE_POWERED)
+ break;
+ case STATE_POWERED:
+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+ if (final == STATE_DEFAULT)
+ break;
+ case STATE_DEFAULT:
+ usbd_device_event_irq (udc_device,
+ DEVICE_ADDRESS_ASSIGNED, 0);
+ if (final == STATE_ADDRESSED)
+ break;
+ case STATE_ADDRESSED:
+ usbd_device_event_irq (udc_device, DEVICE_CONFIGURED,
+ 0);
+ case STATE_CONFIGURED:
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+static void mpc8xx_udc_state_transition_down (usb_device_state_t initial,
+ usb_device_state_t final)
+{
+ if (initial > final) {
+ switch (initial) {
+ case STATE_CONFIGURED:
+ usbd_device_event_irq (udc_device,
+ DEVICE_DE_CONFIGURED, 0);
+ if (final == STATE_ADDRESSED)
+ break;
+ case STATE_ADDRESSED:
+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+ if (final == STATE_DEFAULT)
+ break;
+ case STATE_DEFAULT:
+ usbd_device_event_irq (udc_device,
+ DEVICE_POWER_INTERRUPTION, 0);
+ if (final == STATE_POWERED)
+ break;
+ case STATE_POWERED:
+ usbd_device_event_irq (udc_device, DEVICE_HUB_RESET,
+ 0);
+ case STATE_ATTACHED:
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+/* mpc8xx_udc_stall
+ *
+ * Force returning of STALL tokens on the given endpoint. Protocol or function
+ * STALL conditions are permissable here
+ */
+static void mpc8xx_udc_stall (unsigned int ep)
+{
+ usbp->usep[ep] |= STALL_BITMASK;
+}
+
+/* mpc8xx_udc_set_nak
+ *
+ * Force returning of NAK responses for the given endpoint as a kind of very
+ * simple flow control
+ */
+static void mpc8xx_udc_set_nak (unsigned int ep)
+{
+ usbp->usep[ep] |= NAK_BITMASK;
+ __asm__ ("eieio");
+}
+
+/* mpc8xx_udc_handle_txerr
+ *
+ * Handle errors relevant to TX. Return a status code to allow calling
+ * indicative of what if anything happened
+ */
+static short mpc8xx_udc_handle_txerr()
+{
+ short ep = 0, ret = 0;
+
+ for(; ep<TX_RING_SIZE; ep++){
+ if(usbp->usber&(0x10<<ep)){
+
+ /* Timeout or underrun */
+ if(tx_cbd[ep]->cbd_sc&0x06){
+ ret = 1;
+ mpc8xx_udc_flush_tx_fifo(ep);
+
+ }else{
+ if(usbp->usep[ep]&STALL_BITMASK){
+ if(!ep){
+ usbp->usep[ep]&=
+ ~STALL_BITMASK;
+ }
+ }/* else NAK */
+ }
+ usbp->usber|=(0x10<<ep);
+ }
+ }
+ return ret;
+}
+
+/* mpc8xx_udc_advance_rx
+ *
+ * Advance cbd rx
+ */
+static void mpc8xx_udc_advance_rx(volatile cbd_t ** rx_cbdp, int epid)
+{
+ if((*rx_cbdp)->cbd_sc & RX_BD_W){
+ *rx_cbdp = (volatile cbd_t*)
+ (endpoints[epid]->rbase + CFG_IMMR);
+
+ }else{
+ (*rx_cbdp)++;
+ }
+}
+
+
+/* mpc8xx_udc_flush_tx_fifo
+ *
+ * Flush a given TX fifo. Assumes one tx cbd per endpoint
+ */
+static void mpc8xx_udc_flush_tx_fifo(int epid)
+{
+ volatile cbd_t * tx_cbdp = 0;
+
+ if(epid > MAX_ENDPOINTS){
+ return;
+ }
+
+ /* TX stop */
+ immr->im_cpm.cp_cpcr = ((epid<<2) | 0x1D01);
+ __asm__ ("eieio");
+ while(immr->im_cpm.cp_cpcr & 0x01);
+
+ usbp->uscom = 0x40 | 0;
+
+ /* reset ring */
+ tx_cbdp = (cbd_t*)(endpoints[epid]->tbptr + CFG_IMMR);
+ tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W);
+
+
+ endpoints[epid]->tptr = endpoints[epid]->tbase;
+ endpoints[epid]->tstate = 0x00;
+ endpoints[epid]->tbcnt = 0x00;
+
+ /* TX start */
+ immr->im_cpm.cp_cpcr = ((epid<<2) | 0x2D01);
+ __asm__ ("eieio");
+ while(immr->im_cpm.cp_cpcr & 0x01);
+
+ return;
+}
+
+/* mpc8xx_udc_flush_rx_fifo
+ *
+ * For the sake of completeness of the namespace, it seems like
+ * a good-design-decision (tm) to include mpc8xx_udc_flush_rx_fifo();
+ * If RX_BD_E is true => a driver bug either here or in an upper layer
+ * not polling frequently enough. If RX_BD_E is true we have told the host
+ * we have accepted data but, the CPM found it had no-where to put that data
+ * which needless to say would be a bad thing.
+ */
+static void mpc8xx_udc_flush_rx_fifo()
+{
+ int i = 0;
+ for(i = 0;i<RX_RING_SIZE; i++){
+ if(!(rx_cbd[i]->cbd_sc&RX_BD_E)){
+ ERR("buf %p used rx data len = 0x%x sc=0x%x!\n",
+ rx_cbd[i], rx_cbd[i]->cbd_datlen,
+ rx_cbd[i]->cbd_sc);
+
+ }
+ }
+ ERR("BUG : Input over-run\n");
+}
+
+/* mpc8xx_udc_clear_rxbd
+ *
+ * Release control of RX CBD to CP.
+ */
+static void mpc8xx_udc_clear_rxbd(volatile cbd_t * rx_cbdp)
+{
+ rx_cbdp->cbd_datlen = 0x0000;
+ rx_cbdp->cbd_sc= ((rx_cbdp->cbd_sc & RX_BD_W)|(RX_BD_E | RX_BD_I));
+ __asm__ ("eieio");
+}
+
+/* mpc8xx_udc_tx_irq
+ *
+ * Parse for tx timeout, control RX or USB reset/busy conditions
+ * Return -1 on timeout, -2 on fatal error, else return zero
+ */
+static int mpc8xx_udc_tx_irq(int ep)
+{
+ int i = 0;
+
+ if(usbp->usber&(USB_TX_ERRMASK)){
+ if(mpc8xx_udc_handle_txerr()){
+ /* Timeout, controlling function must retry send */
+ return -1;
+ }
+ }
+
+ if(usbp->usber & (USB_E_RESET|USB_E_BSY)){
+ /* Fatal, abandon TX transaction */
+ return -2;
+ }
+
+ if(usbp->usber & USB_E_RXB){
+ for(i = 0;i<RX_RING_SIZE; i++){
+ if(!(rx_cbd[i]->cbd_sc&RX_BD_E)){
+ if((rx_cbd[i] == ep_ref[0].prx) || ep){
+ return -2;
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+
+/* mpc8xx_udc_ep_tx
+ *
+ * Transmit in a re-entrant fashion outbound USB packets.
+ * Implement retry/timeout mechanism described in USB specification
+ * Toggle DATA0/DATA1 pids as necessary
+ * Introduces non-standard tx_retry. The USB standard has no scope for slave
+ * devices to give up TX, however tx_retry stops us getting stuck in an endless
+ * TX loop.
+ */
+static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
+{
+ struct urb *urb = epi->tx_urb;
+ volatile cbd_t * tx_cbdp = 0;
+ unsigned int ep = 0, pkt_len = 0, x = 0, tx_retry = 0;
+ int ret = 0;
+
+ if(!epi || (epi->endpoint_address&0x03)>=MAX_ENDPOINTS || !urb){
+ return -1;
+ }
+
+ ep = epi->endpoint_address & 0x03;
+ tx_cbdp = (cbd_t*)(endpoints[ep]->tbptr + CFG_IMMR);
+
+ if(tx_cbdp->cbd_sc&TX_BD_R || usbp->usber&USB_E_TXB){
+ mpc8xx_udc_flush_tx_fifo(ep);
+ usbp->usber |= USB_E_TXB;
+ };
+
+ while(tx_retry++ < 100){
+ ret = mpc8xx_udc_tx_irq(ep);
+ if(ret == -1){
+ /* ignore timeout here */
+ }else if(ret == -2){
+ /* Abandon TX */
+ mpc8xx_udc_flush_tx_fifo(ep);
+ return -1;
+ }
+
+ tx_cbdp = (cbd_t*)(endpoints[ep]->tbptr + CFG_IMMR);
+ while(tx_cbdp->cbd_sc&TX_BD_R){};
+ tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc&TX_BD_W);
+
+ pkt_len = urb->actual_length - epi->sent;
+
+ if(pkt_len> epi->tx_packetSize || pkt_len > EP_MAX_PKT){
+ pkt_len = MIN(epi->tx_packetSize, EP_MAX_PKT);
+ }
+
+ for(x=0; x<pkt_len; x++){
+ *((unsigned char*)(tx_cbdp->cbd_bufaddr+x)) =
+ urb->buffer[epi->sent + x];
+ }
+ tx_cbdp->cbd_datlen = pkt_len;
+ tx_cbdp->cbd_sc|=(CBD_TX_BITMASK | ep_ref[ep].pid);
+ __asm__ ("eieio");
+
+ #ifdef __SIMULATE_ERROR__
+ if(++err_poison_test == 2){
+ err_poison_test = 0;
+ tx_cbdp->cbd_sc&=~TX_BD_TC;
+ }
+ #endif
+
+ usbp->uscom = (USCOM_STR | ep);
+
+ while(!(usbp->usber&USB_E_TXB)){
+ ret = mpc8xx_udc_tx_irq(ep);
+ if(ret == -1){
+ /* TX timeout */
+ break;
+ }else if(ret == -2){
+ if(usbp->usber & USB_E_TXB){
+ usbp->usber|=USB_E_TXB;
+ }
+ mpc8xx_udc_flush_tx_fifo(ep);
+ return -1;
+ }
+ };
+
+ if(usbp->usber & USB_E_TXB){
+ usbp->usber|=USB_E_TXB;
+ }
+
+ /* ACK must be present <= 18bit times from TX */
+ if(ret == -1){
+ continue;
+ }
+
+ /* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */
+ epi->sent += pkt_len;
+ epi->last = MIN (urb->actual_length - epi->sent,
+ epi->tx_packetSize);
+ TOGGLE_TX_PID(ep_ref[ep].pid);
+
+ if(epi->sent >= epi->tx_urb->actual_length){
+
+ epi->tx_urb->actual_length = 0;
+ epi->sent = 0;
+
+ if(ep_ref[ep].sc & EP_SEND_ZLP){
+ ep_ref[ep].sc &= ~EP_SEND_ZLP;
+ }else{
+ return 0;
+ }
+ }
+ }
+
+ ERR("TX fail, endpoint 0x%x tx bytes 0x%x/0x%x\n",ep, epi->sent,
+ epi->tx_urb->actual_length);
+
+ return -1;
+}
+
+/* mpc8xx_udc_dump_request
+ *
+ * Dump a control request to console
+ */
+static void mpc8xx_udc_dump_request(struct usb_device_request *request)
+{
+ DBG(
+ "bmRequestType:%02x bRequest:%02x wValue:%04x "
+ "wIndex:%04x wLength:%04x ?\n",
+ request->bmRequestType,
+ request->bRequest,
+ request->wValue,
+ request->wIndex,
+ request->wLength);
+
+ return;
+}
+
+/* mpc8xx_udc_ep0_rx_setup
+ *
+ * Decode received ep0 SETUP packet. return non-zero on error
+ */
+static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp)
+{
+ unsigned int x = 0;
+ struct urb * purb = ep_ref[0].urb;
+ struct usb_endpoint_instance *epi =
+ &udc_device->bus->endpoint_array[0];
+
+ for(; x<rx_cbdp->cbd_datlen; x++){
+ *(((unsigned char*)&ep_ref[0].urb->device_request)+x) =
+ *((unsigned char*)(rx_cbdp->cbd_bufaddr+x));
+ }
+
+ mpc8xx_udc_clear_rxbd(rx_cbdp);
+
+ if (ep0_recv_setup(purb)) {
+ mpc8xx_udc_dump_request(&purb->device_request);
+ return -1;
+ }
+
+ if ((purb->device_request.bmRequestType&USB_REQ_DIRECTION_MASK)
+ == USB_REQ_HOST2DEVICE) {
+
+ switch (purb->device_request.bRequest){
+ case USB_REQ_SET_ADDRESS:
+ /* Send the Status OUT ZLP */
+ ep_ref[0].pid = TX_BD_PID_DATA1;
+ purb->actual_length = 0;
+ mpc8xx_udc_init_tx(epi,purb);
+ mpc8xx_udc_ep_tx(epi);
+
+ /* Move to the addressed state */
+ usbp->usaddr = udc_device->address;
+ mpc8xx_udc_state_transition_up(udc_device->device_state,
+ STATE_ADDRESSED);
+ return 0;
+
+ case USB_REQ_SET_CONFIGURATION:
+ if(!purb->device_request.wValue){
+
+ /* Respond at default address */
+ usbp->usaddr = 0x00;
+ mpc8xx_udc_state_transition_down(udc_device->device_state,
+ STATE_ADDRESSED);
+
+ } else {
+
+ /* TODO: Support multiple configurations */
+ mpc8xx_udc_state_transition_up(udc_device->device_state,STATE_CONFIGURED);
+ for(x=1; x<MAX_ENDPOINTS; x++){
+ if((udc_device->bus->endpoint_array[x].endpoint_address&USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_IN){
+ ep_ref[x].pid = TX_BD_PID_DATA0;
+ }else{
+ ep_ref[x].pid = RX_BD_PID_DATA0;
+ }
+ /* Set configuration must unstall endpoints */
+ usbp->usep[x]&=~STALL_BITMASK;
+ }
+
+ }
+ break;
+ default:
+ /* CDC/Vendor specific */
+ break;
+ }
+
+ /* Send ZLP as ACK in Status OUT phase */
+ ep_ref[0].pid = TX_BD_PID_DATA1;
+ purb->actual_length = 0;
+ mpc8xx_udc_init_tx(epi,purb);
+ mpc8xx_udc_ep_tx(epi);
+
+ }else{
+ if(purb->actual_length){
+ ep_ref[0].pid = TX_BD_PID_DATA1;
+ mpc8xx_udc_init_tx(epi,purb);
+
+ if(!(purb->actual_length%EP0_MAX_PACKET_SIZE)){
+ ep_ref[0].sc |= EP_SEND_ZLP;
+ }
+
+ if(purb->device_request.wValue==
+ USB_DESCRIPTOR_TYPE_DEVICE){
+ if(le16_to_cpu(purb->device_request.wLength)>
+ purb->actual_length){
+ /* Send EP0_MAX_PACKET_SIZE bytes
+ * unless correct size requested.
+ */
+ if(purb->actual_length >
+ epi->tx_packetSize){
+
+ purb->actual_length =
+ epi->tx_packetSize;
+ }
+
+ }
+ }
+ mpc8xx_udc_ep_tx(epi);
+
+ }else{
+ /* Corrupt SETUP packet? */
+ ERR("Zero length data or SETUP with DATA-IN phase ?\n");
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/* mpc8xx_udc_init_tx
+ *
+ * Setup some basic parameters for a TX transaction
+ */
+static void mpc8xx_udc_init_tx(struct usb_endpoint_instance *epi,
+ struct urb * tx_urb)
+{
+ epi->sent = 0;
+ epi->last = 0;
+ epi->tx_urb = tx_urb;
+}
+
+/* mpc8xx_udc_ep0_rx
+ *
+ * Receive ep0/control USB data. Parse and possibly send a response.
+ */
+static void mpc8xx_udc_ep0_rx(volatile cbd_t * rx_cbdp)
+{
+ if(rx_cbdp->cbd_sc&RX_BD_PID_SETUP){
+
+ /* Unconditionally accept SETUP packets */
+ if(mpc8xx_udc_ep0_rx_setup(rx_cbdp)){
+ mpc8xx_udc_stall (0);
+ }
+
+ } else {
+
+ mpc8xx_udc_clear_rxbd(rx_cbdp);
+
+ if((rx_cbdp->cbd_datlen-2)){
+ /* SETUP with a DATA phase
+ * outside of SETUP packet.
+ * Reply with STALL.
+ */
+ mpc8xx_udc_stall (0);
+ }
+ }
+}
+
+/* mpc8xx_udc_epn_rx
+ *
+ * Receive some data from cbd into USB system urb data abstraction
+ * Upper layers should NAK if there is insufficient RX data space
+ */
+static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp)
+{
+ struct usb_endpoint_instance *epi = 0;
+ struct urb *urb = 0;
+ unsigned int x = 0;
+
+ if(epid >= MAX_ENDPOINTS || !rx_cbdp->cbd_datlen){
+ return 0;
+ }
+
+ /* USB 2.0 PDF section 8.6.4
+ * Discard data with invalid PID it is a resend.
+ */
+ if(ep_ref[epid].pid!=(rx_cbdp->cbd_sc&0xC0)){
+ return 1;
+ }
+ TOGGLE_RX_PID(ep_ref[epid].pid);
+
+ epi = &udc_device->bus->endpoint_array[epid];
+ urb = epi->rcv_urb;
+
+ for(; x<(rx_cbdp->cbd_datlen-2); x++){
+ *((unsigned char*)(urb->buffer + urb->actual_length +x)) =
+ *((unsigned char*)(rx_cbdp->cbd_bufaddr+x));
+ }
+
+ if(x){
+ usbd_rcv_complete (epi, x, 0);
+ if(ep_ref[epid].urb->status == RECV_ERROR){
+ DBG("RX error unset NAK\n");
+ udc_unset_nak(epid);
+ }
+ }
+ return x;
+}
+
+/* mpc8xx_udc_clock_init
+ *
+ * Obtain a clock reference for Full Speed Signaling
+ */
+static void mpc8xx_udc_clock_init (volatile immap_t * immr,
+ volatile cpm8xx_t * cp)
+{
+
+#if defined(CFG_USB_EXTC_CLK)
+
+ /* This has been tested with a 48MHz crystal on CLK6 */
+ switch(CFG_USB_EXTC_CLK){
+ case 1:
+ immr->im_ioport.iop_papar|= 0x0100;
+ immr->im_ioport.iop_padir&= ~0x0100;
+ cp->cp_sicr|= 0x24;
+ break;
+ case 2:
+ immr->im_ioport.iop_papar|= 0x0200;
+ immr->im_ioport.iop_padir&= ~0x0200;
+ cp->cp_sicr|= 0x2D;
+ break;
+ case 3:
+ immr->im_ioport.iop_papar|= 0x0400;
+ immr->im_ioport.iop_padir&= ~0x0400;
+ cp->cp_sicr|= 0x36;
+ break;
+ case 4:
+ immr->im_ioport.iop_papar|= 0x0800;
+ immr->im_ioport.iop_padir&= ~0x0800;
+ cp->cp_sicr|= 0x3F;
+ break;
+ default:
+ udc_state = STATE_ERROR;
+ break;
+ }
+
+#elif defined(CFG_USB_BRGCLK)
+
+ /* This has been tested with brgclk == 50MHz */
+ DECLARE_GLOBAL_DATA_PTR;
+ int divisor = 0;
+
+ if(gd->cpu_clk<48000000L){
+ ERR("brgclk is too slow for full-speed USB!\n");
+ udc_state = STATE_ERROR;
+ return;
+ }
+
+ /* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48Mhz)
+ * but, can /probably/ live with close-ish alternative rates.
+ */
+ divisor = (gd->cpu_clk/48000000L)-1;
+ cp->cp_sicr &= ~0x0000003F;
+
+ switch(CFG_USB_BRGCLK){
+ case 1:
+ cp->cp_brgc1 |= (divisor|CPM_BRG_EN);
+ cp->cp_sicr &= ~0x2F;
+ break;
+ case 2:
+ cp->cp_brgc2 |= (divisor|CPM_BRG_EN);
+ cp->cp_sicr |= 0x00000009;
+ break;
+ case 3:
+ cp->cp_brgc3 |= (divisor|CPM_BRG_EN);
+ cp->cp_sicr |= 0x00000012;
+ break;
+ case 4:
+ cp->cp_brgc4 = (divisor|CPM_BRG_EN);
+ cp->cp_sicr |= 0x0000001B;
+ break;
+ default:
+ udc_state = STATE_ERROR;
+ break;
+ }
+
+#else
+ #error "CFG_USB_EXTC_CLK or CFG_USB_BRGCLK must be defined"
+#endif
+
+}
+
+/* mpc8xx_udc_cbd_attach
+ *
+ * attach a cbd to and endpoint
+ */
+static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size)
+{
+
+ if (!tx_cbd[ep] || !rx_cbd[ep] || ep >= MAX_ENDPOINTS){
+ udc_state = STATE_ERROR;
+ return;
+ }
+
+ if (tx_size>USB_MAX_PKT || rx_size>USB_MAX_PKT ||
+ (!tx_size && !rx_size)){
+ udc_state = STATE_ERROR;
+ return;
+ }
+
+ /* Attach CBD to appropiate Parameter RAM Endpoint data structure */
+ if(rx_size){
+ endpoints[ep]->rbase = (u32)rx_cbd[rx_ct];
+ endpoints[ep]->rbptr = (u32)rx_cbd[rx_ct];
+ rx_ct++;
+
+ if(!ep){
+
+ endpoints[ep]->rbptr = (u32)rx_cbd[rx_ct];
+ rx_cbd[rx_ct]->cbd_sc |= RX_BD_W;
+ rx_ct++;
+
+ }else{
+ rx_ct += 2;
+ endpoints[ep]->rbptr = (u32)rx_cbd[rx_ct];
+ rx_cbd[rx_ct]->cbd_sc |= RX_BD_W;
+ rx_ct++;
+ }
+
+ /* Where we expect to RX data on this endpoint */
+ ep_ref[ep].prx = rx_cbd[rx_ct-1];
+ }else{
+
+ ep_ref[ep].prx = 0;
+ endpoints[ep]->rbase = 0;
+ endpoints[ep]->rbptr = 0;
+ }
+
+ if(tx_size){
+ endpoints[ep]->tbase = (u32)tx_cbd[tx_ct];
+ endpoints[ep]->tbptr = (u32)tx_cbd[tx_ct];
+ tx_ct++;
+ }else{
+ endpoints[ep]->tbase = 0;
+ endpoints[ep]->tbptr = 0;
+ }
+
+ endpoints[ep]->tstate = 0;
+ endpoints[ep]->tbcnt = 0;
+ endpoints[ep]->mrblr = EP_MAX_PKT;
+ endpoints[ep]->rfcr = 0x18;
+ endpoints[ep]->tfcr = 0x18;
+ ep_ref[ep].sc |= EP_ATTACHED;
+
+ DBG("ep %d rbase 0x%08x rbptr 0x%08x tbase 0x%08x tbptr 0x%08x prx = %p\n",
+ ep, endpoints[ep]->rbase, endpoints[ep]->rbptr, endpoints[ep]->tbase,
+ endpoints[ep]->tbptr, ep_ref[ep].prx);
+
+ return;
+}
+
+/* mpc8xx_udc_cbd_init
+ *
+ * Allocate space for a cbd and allocate TX/RX data space
+ */
+static void mpc8xx_udc_cbd_init (void)
+{
+ int i = 0;
+
+ for(; i<TX_RING_SIZE; i++){
+ tx_cbd[i]= (cbd_t*)
+ mpc8xx_udc_alloc(sizeof(cbd_t), sizeof(int));
+ }
+
+ for(i=0; i<RX_RING_SIZE; i++){
+ rx_cbd[i]= (cbd_t*)
+ mpc8xx_udc_alloc(sizeof(cbd_t),sizeof(int));
+ }
+
+ for(i=0; i< TX_RING_SIZE; i++){
+ tx_cbd[i]->cbd_bufaddr =
+ mpc8xx_udc_alloc(EP_MAX_PKT, sizeof(int));
+
+ tx_cbd[i]->cbd_sc = (TX_BD_I | TX_BD_W);
+ tx_cbd[i]->cbd_datlen = 0x0000;
+ }
+
+
+ for(i=0; i< RX_RING_SIZE; i++){
+ rx_cbd[i]->cbd_bufaddr =
+ mpc8xx_udc_alloc(EP_MAX_PKT, sizeof(int));
+ rx_cbd[i]->cbd_sc = (RX_BD_I | RX_BD_E);
+ rx_cbd[i]->cbd_datlen = 0x0000;
+
+ }
+
+ return;
+}
+
+/* mpc8xx_udc_endpoint_init
+ *
+ * Attach an endpoint to some dpram
+ */
+static void mpc8xx_udc_endpoint_init (void)
+{
+ int i = 0;
+
+ for(; i<MAX_ENDPOINTS; i++){
+ endpoints[i]= (usb_epb_t*)
+ mpc8xx_udc_alloc(sizeof(usb_epb_t) , 32);
+ }
+}
+
+/* mpc8xx_udc_alloc
+ *
+ * Grab the address of some dpram
+ */
+static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment)
+{
+ u32 retaddr = address_base;
+
+ while(retaddr%alignment){
+ retaddr++;
+ }
+ address_base+= data_size;
+
+ return retaddr;
+}
+
+#endif /* CONFIG_MPC885_FAMILY && CONFIG_USB_DEVICE) */