gpio: stm32_gpio: move clock config from driver to board
This patch removes the gpio clock enable from gpio driver & move it in the
board code, making it possible to use the gpio driver with other socs.
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
diff --git a/arch/arm/mach-stm32/stm32f4/clock.c b/arch/arm/mach-stm32/stm32f4/clock.c
index 576d3e6..631f36a 100644
--- a/arch/arm/mach-stm32/stm32f4/clock.c
+++ b/arch/arm/mach-stm32/stm32f4/clock.c
@@ -71,6 +71,21 @@
#define FLASH_ACR_ICEN (1 << 9)
#define FLASH_ACR_DCEN (1 << 10)
+/*
+ * RCC GPIO specific definitions
+ */
+#define RCC_ENR_GPIO_A_EN (1 << 0)
+#define RCC_ENR_GPIO_B_EN (1 << 1)
+#define RCC_ENR_GPIO_C_EN (1 << 2)
+#define RCC_ENR_GPIO_D_EN (1 << 3)
+#define RCC_ENR_GPIO_E_EN (1 << 4)
+#define RCC_ENR_GPIO_F_EN (1 << 5)
+#define RCC_ENR_GPIO_G_EN (1 << 6)
+#define RCC_ENR_GPIO_H_EN (1 << 7)
+#define RCC_ENR_GPIO_I_EN (1 << 8)
+#define RCC_ENR_GPIO_J_EN (1 << 9)
+#define RCC_ENR_GPIO_K_EN (1 << 10)
+
struct pll_psc {
u8 pll_m;
u16 pll_n;
@@ -237,6 +252,39 @@
case USART1_CLOCK_CFG:
setbits_le32(&STM32_RCC->apb2enr, RCC_ENR_USART1EN);
break;
+ case GPIO_A_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_A_EN);
+ break;
+ case GPIO_B_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_B_EN);
+ break;
+ case GPIO_C_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_C_EN);
+ break;
+ case GPIO_D_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_D_EN);
+ break;
+ case GPIO_E_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_E_EN);
+ break;
+ case GPIO_F_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_F_EN);
+ break;
+ case GPIO_G_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_G_EN);
+ break;
+ case GPIO_H_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_H_EN);
+ break;
+ case GPIO_I_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_I_EN);
+ break;
+ case GPIO_J_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_J_EN);
+ break;
+ case GPIO_K_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_K_EN);
+ break;
default:
break;
}