pinctrl: rockchip: Split the common set_mux() into per Soc
Such as rk3288's pins of pmu_gpio0 are a special feature, which have no
higher 16 writing corresponding bits, use common set_mux() func would
introduce more code, so implement their set_mux() in each Soc's own
file to reduce the size of code.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3188.c b/drivers/pinctrl/rockchip/pinctrl-rk3188.c
index 7cc52c0..617ae28 100644
--- a/drivers/pinctrl/rockchip/pinctrl-rk3188.c
+++ b/drivers/pinctrl/rockchip/pinctrl-rk3188.c
@@ -11,6 +11,30 @@
#include "pinctrl-rockchip.h"
+static int rk3188_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
+{
+ struct rockchip_pinctrl_priv *priv = bank->priv;
+ int iomux_num = (pin / 8);
+ struct regmap *regmap;
+ int reg, ret, mask, mux_type;
+ u8 bit;
+ u32 data;
+
+ regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
+ ? priv->regmap_pmu : priv->regmap_base;
+
+ /* get basic quadrupel of mux registers and the correct reg inside */
+ mux_type = bank->iomux[iomux_num].type;
+ reg = bank->iomux[iomux_num].offset;
+ reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
+
+ data = (mask << (bit + 16));
+ data |= (mux & mask) << bit;
+ ret = regmap_write(regmap, reg, data);
+
+ return ret;
+}
+
#define RK3188_PULL_OFFSET 0x164
#define RK3188_PULL_PMU_OFFSET 0x64
@@ -60,6 +84,7 @@
.label = "RK3188-GPIO",
.type = RK3188,
.grf_mux_offset = 0x60,
+ .set_mux = rk3188_set_mux,
.pull_calc_reg = rk3188_calc_pull_reg_and_bit,
};