arm: dts: sunxi: h5: Update DT files
Update the H5 DT files from the Linux 5.12 release.
The changes don't affect U-Boot at all, but fix Gigabit Ethernet when
this DT is passed on to the Linux kernel. It also introduces DVFS.
This also updates the shared sunxi-h3-h5.dtsi, but that only adds nodes
that are of no concern to U-Boot.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts b/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts
index 2e2b14c..8857a37 100644
--- a/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts
+++ b/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts
@@ -3,6 +3,7 @@
/dts-v1/;
#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
#include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi>
/ {
diff --git a/arch/arm/dts/sun50i-h5-cpu-opp.dtsi b/arch/arm/dts/sun50i-h5-cpu-opp.dtsi
new file mode 100644
index 0000000..b265720
--- /dev/null
+++ b/arch/arm/dts/sun50i-h5-cpu-opp.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+/ {
+ cpu_opp_table: cpu-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <1000000 1000000 1310000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-648000000 {
+ opp-hz = /bits/ 64 <648000000>;
+ opp-microvolt = <1040000 1040000 1310000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1080000 1080000 1310000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-912000000 {
+ opp-hz = /bits/ 64 <912000000>;
+ opp-microvolt = <1120000 1120000 1310000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-960000000 {
+ opp-hz = /bits/ 64 <960000000>;
+ opp-microvolt = <1160000 1160000 1310000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1200000 1200000 1310000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-microvolt = <1240000 1240000 1310000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1104000000 {
+ opp-hz = /bits/ 64 <1104000000>;
+ opp-microvolt = <1260000 1260000 1310000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1152000000 {
+ opp-hz = /bits/ 64 <1152000000>;
+ opp-microvolt = <1300000 1300000 1310000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
index a918066..016da3e 100644
--- a/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
+++ b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
@@ -4,6 +4,7 @@
/dts-v1/;
#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
#include <sunxi-libretech-all-h3-cc.dtsi>
/ {
diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
index df1b926..6e30a56 100644
--- a/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
+++ b/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
@@ -36,7 +36,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
/delete-property/ allwinner,leds-active-low;
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
index 4f9ba53..4c3921a 100644
--- a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
@@ -25,13 +25,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "nanopi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- status {
+ led-1 {
label = "nanopi:red:status";
gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
@@ -96,7 +96,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
index b059e20..02f8e72 100644
--- a/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
@@ -22,13 +22,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "nanopi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- status {
+ led-1 {
label = "nanopi:blue:status";
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
index 70b5f09..1010c1b 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
@@ -42,13 +42,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "orangepi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- status {
+ led-1 {
label = "orangepi:red:status";
gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
@@ -61,6 +61,7 @@
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ wakeup-source;
};
};
@@ -93,6 +94,10 @@
status = "okay";
};
+&cpu0 {
+ cpu-supply = <®_vdd_cpux>;
+};
+
&de {
status = "okay";
};
@@ -118,7 +123,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
@@ -168,6 +173,22 @@
status = "okay";
};
+&r_i2c {
+ status = "okay";
+
+ reg_vdd_cpux: regulator@65 {
+ compatible = "silergy,sy8106a";
+ reg = <0x65>;
+ regulator-name = "vdd-cpux";
+ silergy,fixed-microvolt = <1100000>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <200>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
&spi0 {
status = "okay";
diff --git a/arch/arm/dts/sun50i-h5-orangepi-prime.dts b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
index cb44bfa..74e0444 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
@@ -36,13 +36,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "orangepi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- status {
+ led-1 {
label = "orangepi:red:status";
gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
@@ -124,7 +124,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
index ef5ca64..d13980e 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
@@ -33,13 +33,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "orangepi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
default-state = "on";
};
- status {
+ led-1 {
label = "orangepi:red:status";
gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
};
diff --git a/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
index c95a685..22530ac 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
@@ -30,6 +30,21 @@
};
};
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "orangepi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led-1 {
+ label = "orangepi:red:status";
+ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
@@ -48,6 +63,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&hdmi {
status = "okay";
};
@@ -92,6 +111,10 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pa_pins>;
@@ -103,3 +126,18 @@
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};
+
+&usb_otg {
+ /*
+ * According to schematics CN1 MicroUSB port can be used to take
+ * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+ * port cannot provide power externally even if the board is powered
+ * via GPIO pins. It thus makes sense to force peripheral mode.
+ */
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-h5.dtsi b/arch/arm/dts/sun50i-h5.dtsi
index 3a1c8b2..ab860e2 100644
--- a/arch/arm/dts/sun50i-h5.dtsi
+++ b/arch/arm/dts/sun50i-h5.dtsi
@@ -3,6 +3,8 @@
#include <sunxi-h3-h5.dtsi>
+#include <dt-bindings/thermal/thermal.h>
+
/ {
cpus {
#address-cells = <1>;
@@ -13,6 +15,9 @@
device_type = "cpu";
reg = <0>;
enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
@@ -20,6 +25,9 @@
device_type = "cpu";
reg = <1>;
enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
@@ -27,6 +35,9 @@
device_type = "cpu";
reg = <2>;
enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
@@ -34,12 +45,14 @@
device_type = "cpu";
reg = <3>;
enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
};
};
pmu {
- compatible = "arm,cortex-a53-pmu",
- "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
@@ -54,6 +67,7 @@
timer {
compatible = "arm,armv8-timer";
+ arm,no-tick-in-suspend;
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
@@ -107,6 +121,19 @@
resets = <&ccu RST_BUS_CE>;
};
+ deinterlace: deinterlace@1e00000 {
+ compatible = "allwinner,sun8i-h3-deinterlace";
+ reg = <0x01e00000 0x20000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ <&ccu CLK_DRAM_DEINTERLACE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mbus 9>;
+ interconnect-names = "dma-mem";
+ };
+
mali: gpu@1e80000 {
compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
reg = <0x01e80000 0x30000>;
@@ -126,8 +153,7 @@
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp",
"gpmmu",
"pp",
@@ -138,8 +164,7 @@
"pp2",
"ppmmu2",
"pp3",
- "ppmmu3",
- "pmu";
+ "ppmmu3";
clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
clock-names = "bus", "core";
resets = <&ccu RST_BUS_GPU>;
@@ -166,6 +191,30 @@
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 0>;
+
+ trips {
+ cpu_hot_trip: cpu-hot {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot_trip: cpu-very-hot {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpu-hot-limit {
+ trip = <&cpu_hot_trip>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
gpu_thermal {
diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi
index 20217e2..4e89701 100644
--- a/arch/arm/dts/sun8i-h3.dtsi
+++ b/arch/arm/dts/sun8i-h3.dtsi
@@ -41,6 +41,7 @@
*/
#include "sunxi-h3-h5.dtsi"
+#include <dt-bindings/thermal/thermal.h>
/ {
cpu0_opp_table: opp_table0 {
@@ -111,6 +112,26 @@
};
};
+ gpu_opp_table: gpu-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-120000000 {
+ opp-hz = /bits/ 64 <120000000>;
+ };
+
+ opp-312000000 {
+ opp-hz = /bits/ 64 <312000000>;
+ };
+
+ opp-432000000 {
+ opp-hz = /bits/ 64 <432000000>;
+ };
+
+ opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
@@ -204,9 +225,7 @@
clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
clock-names = "bus", "core";
resets = <&ccu RST_BUS_GPU>;
-
- assigned-clocks = <&ccu CLK_GPU>;
- assigned-clock-rates = <384000000>;
+ operating-points-v2 = <&gpu_opp_table>;
};
ths: thermal-sensor@1c25000 {
@@ -227,6 +246,30 @@
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 0>;
+
+ trips {
+ cpu_hot_trip: cpu-hot {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot_trip: cpu-very-hot {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpu-hot-limit {
+ trip = <&cpu_hot_trip>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
};
};
diff --git a/arch/arm/dts/sunxi-h3-h5.dtsi b/arch/arm/dts/sunxi-h3-h5.dtsi
index 5e9c306..9be1337 100644
--- a/arch/arm/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/dts/sunxi-h3-h5.dtsi
@@ -114,7 +114,7 @@
display_clocks: clock@1000000 {
/* compatible is in per SoC .dtsi file */
- reg = <0x01000000 0x100000>;
+ reg = <0x01000000 0x10000>;
clocks = <&ccu CLK_BUS_DE>,
<&ccu CLK_DE>;
clock-names = "bus",
@@ -239,6 +239,16 @@
};
};
+ msgbox: mailbox@1c17000 {
+ compatible = "allwinner,sun8i-h3-msgbox",
+ "allwinner,sun6i-a31-msgbox";
+ reg = <0x01c17000 0x1000>;
+ clocks = <&ccu CLK_BUS_MSGBOX>;
+ resets = <&ccu RST_BUS_MSGBOX>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ };
+
usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-h3-musb";
reg = <0x01c19000 0x400>;
@@ -560,6 +570,8 @@
compatible = "allwinner,sun8i-h3-mbus";
reg = <0x01c62000 0x1000>;
clocks = <&ccu CLK_MBUS>;
+ #address-cells = <1>;
+ #size-cells = <1>;
dma-ranges = <0x00000000 0x40000000 0xc0000000>;
#interconnect-cells = <1>;
};
@@ -650,6 +662,19 @@
status = "disabled";
};
+ i2s2: i2s@1c22800 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22800 0x400>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 27>;
+ resets = <&ccu RST_BUS_I2S2>;
+ dma-names = "tx";
+ status = "disabled";
+ };
+
codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-codec";
@@ -892,6 +917,21 @@
pins = "PL0", "PL1";
function = "s_i2c";
};
+
+ r_pwm_pin: r-pwm-pin {
+ pins = "PL10";
+ function = "s_pwm";
+ };
};
+
+ r_pwm: pwm@1f03800 {
+ compatible = "allwinner,sun8i-h3-pwm";
+ reg = <0x01f03800 0x8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_pwm_pin>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
};
};