imx8mq: Generate a single bootable flash.bin again
All i.MX8MQ boards have been converted to binman, which makes it
necessary to flash both flash.bin and u-boot.itb to get a bootable
system. Prior to the conversion, only flash.bin was needed.
Such new requirement breaks existing distro mechanisms to generate the
final binary because the extra u-boot.itb is now required.
Generate a final flash.bin that can be used again as a single bootable
binary to keep the original behavior.
After this change the SPL binary is called spl.bin, which is a more
descriptive name for its purpose, and can still be used standalone (for
example, for secure boot purposes).
Also update imx8mq_evk.rst to remove the u-boot.itb copy step.
This is a cherry-pick of 028abfd9b157 ("imx8mm-evk: Generate a single
bootable flash.bin again") adjusted to apply to i.MX8MQ.
Signed-off-by: Patrick Wildt <patrick@blueri.se>
Reviewed-by: Fabio Estevam <festevam@denx.de>
diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi
index 2c10e9b..8a6075c 100644
--- a/arch/arm/dts/imx8mq-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-u-boot.dtsi
@@ -50,7 +50,9 @@
};
};
- flash {
+ spl {
+ filename = "spl.bin";
+
mkimage {
args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
@@ -119,4 +121,19 @@
};
};
};
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl: blob-ext@1 {
+ offset = <0x0>;
+ filename = "spl.bin";
+ };
+
+ uboot: blob-ext@2 {
+ offset = <0x57c00>;
+ filename = "u-boot.itb";
+ };
+ };
};
diff --git a/arch/arm/mach-imx/imx8m/imximage.cfg b/arch/arm/mach-imx/imx8m/imximage.cfg
index 9c6eaf0..2a3f959 100644
--- a/arch/arm/mach-imx/imx8m/imximage.cfg
+++ b/arch/arm/mach-imx/imx8m/imximage.cfg
@@ -8,4 +8,4 @@
FIT
BOOT_FROM sd
SIGNED_HDMI signed_hdmi.bin
-LOADER mkimage.flash.mkimage 0x7e1000
+LOADER u-boot-spl-ddr.bin 0x7e1000
diff --git a/doc/board/nxp/imx8mq_evk.rst b/doc/board/nxp/imx8mq_evk.rst
index 92eeda7..aa1ecfb 100644
--- a/doc/board/nxp/imx8mq_evk.rst
+++ b/doc/board/nxp/imx8mq_evk.rst
@@ -50,7 +50,6 @@
.. code-block:: bash
$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc
- $sudo dd if=u-boot.itb of=/dev/sd[x] bs=1024 seek=384 conv=notrunc
Boot
----