Prepare USB layer for ehci
Prepare USB layer for ehci support
Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
diff --git a/include/usb.h b/include/usb.h
index 510df95..cd6f37a 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -138,7 +138,7 @@
struct usb_device {
int devnum; /* Device number on USB bus */
- int slow; /* Slow device? */
+ int speed; /* full/low/high */
char mf[32]; /* manufacturer */
char prod[32]; /* product */
char serial[32]; /* serial number */
@@ -171,6 +171,7 @@
unsigned long status;
int act_len; /* transfered bytes */
int maxchild; /* Number of ports if hub */
+ int portnr;
struct usb_device *parent;
struct usb_device *children[USB_MAXCHILDREN];
};
@@ -180,8 +181,9 @@
*/
#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
- defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_SL811HS) || \
- defined(CONFIG_USB_ISP116X_HCD) || defined(CONFIG_USB_R8A66597_HCD)
+ defined(CONFI_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \
+ defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \
+ defined(CONFIG_USB_R8A66597_HCD)
int usb_lowlevel_init(void);
int usb_lowlevel_stop(void);
@@ -279,7 +281,7 @@
* - endpoint number (4 bits)
* - current Data0/1 state (1 bit)
* - direction (1 bit)
- * - speed (1 bit)
+ * - speed (2 bits)
* - max packet size (2 bits: 8, 16, 32 or 64)
* - pipe type (2 bits: control, interrupt, bulk, isochronous)
*
@@ -296,7 +298,7 @@
* - device: bits 8-14
* - endpoint: bits 15-18
* - Data0/1: bit 19
- * - speed: bit 26 (0 = Full, 1 = Low Speed)
+ * - speed: bit 26 (0 = Full, 1 = Low Speed, 2 = High)
* - pipe type: bits 30-31 (00 = isochronous, 01 = interrupt,
* 10 = control, 11 = bulk)
*
@@ -308,8 +310,8 @@
/* Create various pipes... */
#define create_pipe(dev,endpoint) \
(((dev)->devnum << 8) | (endpoint << 15) | \
- ((dev)->slow << 26) | (dev)->maxpacketsize)
-#define default_pipe(dev) ((dev)->slow << 26)
+ ((dev)->speed << 26) | (dev)->maxpacketsize)
+#define default_pipe(dev) ((dev)->speed << 26)
#define usb_sndctrlpipe(dev, endpoint) ((PIPE_CONTROL << 30) | \
create_pipe(dev, endpoint))
@@ -359,7 +361,8 @@
#define usb_pipe_endpdev(pipe) (((pipe) >> 8) & 0x7ff)
#define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf)
#define usb_pipedata(pipe) (((pipe) >> 19) & 1)
-#define usb_pipeslow(pipe) (((pipe) >> 26) & 1)
+#define usb_pipespeed(pipe) (((pipe) >> 26) & 3)
+#define usb_pipeslow(pipe) (usb_pipespeed(pipe) == USB_SPEED_LOW)
#define usb_pipetype(pipe) (((pipe) >> 30) & 3)
#define usb_pipeisoc(pipe) (usb_pipetype((pipe)) == PIPE_ISOCHRONOUS)
#define usb_pipeint(pipe) (usb_pipetype((pipe)) == PIPE_INTERRUPT)
diff --git a/include/usb_defs.h b/include/usb_defs.h
index 353019f..8032e57 100644
--- a/include/usb_defs.h
+++ b/include/usb_defs.h
@@ -80,6 +80,12 @@
#define USB_DIR_OUT 0
#define USB_DIR_IN 0x80
+/* USB device speeds */
+#define USB_SPEED_FULL 0x0 /* 12Mbps */
+#define USB_SPEED_LOW 0x1 /* 1.5Mbps */
+#define USB_SPEED_HIGH 0x2 /* 480Mbps */
+#define USB_SPEED_RESERVED 0x3
+
/* Descriptor types */
#define USB_DT_DEVICE 0x01
#define USB_DT_CONFIG 0x02
@@ -202,6 +208,7 @@
#define USB_PORT_FEAT_RESET 4
#define USB_PORT_FEAT_POWER 8
#define USB_PORT_FEAT_LOWSPEED 9
+#define USB_PORT_FEAT_HIGHSPEED 10
#define USB_PORT_FEAT_C_CONNECTION 16
#define USB_PORT_FEAT_C_ENABLE 17
#define USB_PORT_FEAT_C_SUSPEND 18
@@ -216,6 +223,9 @@
#define USB_PORT_STAT_RESET 0x0010
#define USB_PORT_STAT_POWER 0x0100
#define USB_PORT_STAT_LOW_SPEED 0x0200
+#define USB_PORT_STAT_HIGH_SPEED 0x0400 /* support for EHCI */
+#define USB_PORT_STAT_SPEED \
+ (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED)
/* wPortChange bits */
#define USB_PORT_STAT_C_CONNECTION 0x0001