timer: Add MPC83xx timer driver
Add a timer driver for the MPC83xx architecture.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig
index 5ab6749..a7d600b 100644
--- a/drivers/timer/Kconfig
+++ b/drivers/timer/Kconfig
@@ -140,4 +140,11 @@
Select this to enable support for the timer found on
STM32 devices.
+config MPC83XX_TIMER
+ bool "MPC83xx timer support"
+ depends on TIMER
+ help
+ Select this to enable support for the timer found on
+ devices based on the MPC83xx family of SoCs.
+
endmenu
diff --git a/drivers/timer/Makefile b/drivers/timer/Makefile
index ed482df..7f19c49 100644
--- a/drivers/timer/Makefile
+++ b/drivers/timer/Makefile
@@ -11,6 +11,7 @@
obj-$(CONFIG_ATMEL_PIT_TIMER) += atmel_pit_timer.o
obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence-ttc.o
obj-$(CONFIG_DESIGNWARE_APB_TIMER) += dw-apb-timer.o
+obj-$(CONFIG_MPC83XX_TIMER) += mpc83xx_timer.o
obj-$(CONFIG_OMAP_TIMER) += omap-timer.o
obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o
obj-$(CONFIG_SANDBOX_TIMER) += sandbox_timer.o
diff --git a/drivers/timer/mpc83xx_timer.c b/drivers/timer/mpc83xx_timer.c
new file mode 100644
index 0000000..84a9ab0
--- /dev/null
+++ b/drivers/timer/mpc83xx_timer.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2018
+ * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
+ */
+
+#include <common.h>
+#include <board.h>
+#include <clk.h>
+#include <dm.h>
+#include <timer.h>
+#include <watchdog.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * struct mpc83xx_timer_priv - Private data structure for MPC83xx timer driver
+ * @decrementer_count: Value to which the decrementer register should be re-set
+ * to when a timer interrupt occurs, thus determines the
+ * interrupt frequency (value for 1e6/HZ microseconds)
+ * @timestamp: Counter for the number of timer interrupts that have
+ * occurred (i.e. can be used to trigger events
+ * periodically in the timer interrupt)
+ */
+struct mpc83xx_timer_priv {
+ uint decrementer_count;
+ ulong timestamp;
+};
+
+/*
+ * Bitmask for enabling the time base in the SPCR (System Priority
+ * Configuration Register)
+ */
+static const u32 SPCR_TBEN_MASK = BIT(31 - 9);
+
+/**
+ * get_dec() - Get the value of the decrementer register
+ *
+ * Return: The value of the decrementer register
+ */
+static inline unsigned long get_dec(void)
+{
+ unsigned long val;
+
+ asm volatile ("mfdec %0" : "=r" (val) : );
+
+ return val;
+}
+
+/**
+ * set_dec() - Set the value of the decrementer register
+ * @val: The value of the decrementer register to be set
+ */
+static inline void set_dec(unsigned long val)
+{
+ if (val)
+ asm volatile ("mtdec %0"::"r" (val));
+}
+
+/**
+ * mftbu() - Get value of TBU (upper time base) register
+ *
+ * Return: Value of the TBU register
+ */
+static inline u32 mftbu(void)
+{
+ u32 rval;
+
+ asm volatile("mftbu %0" : "=r" (rval));
+ return rval;
+}
+
+/**
+ * mftb() - Get value of TBL (lower time base) register
+ *
+ * Return: Value of the TBL register
+ */
+static inline u32 mftb(void)
+{
+ u32 rval;
+
+ asm volatile("mftb %0" : "=r" (rval));
+ return rval;
+}
+
+/*
+ * TODO(mario.six@gdsys.cc): This should really be done by timer_init, and the
+ * interrupt init should go into a interrupt driver.
+ */
+int interrupt_init(void)
+{
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ struct udevice *csb;
+ struct udevice *board;
+ struct udevice *timer;
+ struct mpc83xx_timer_priv *timer_priv;
+ struct clk clock;
+ int ret;
+
+ ret = uclass_first_device_err(UCLASS_TIMER, &timer);
+ if (ret) {
+ debug("%s: Could not find timer device (error: %d)",
+ __func__, ret);
+ return ret;
+ }
+
+ timer_priv = dev_get_priv(timer);
+
+ if (board_get(&board)) {
+ debug("%s: board device could not be fetched.\n", __func__);
+ return -ENOENT;
+ }
+
+ ret = uclass_get_device_by_phandle(UCLASS_SIMPLE_BUS, board,
+ "csb", &csb);
+ if (ret) {
+ debug("%s: Could not retrieve CSB device (error: %d)",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = clk_get_by_index(csb, 0, &clock);
+ if (ret) {
+ debug("%s: Could not retrieve clock (error: %d)",
+ __func__, ret);
+ return ret;
+ }
+
+ timer_priv->decrementer_count = (clk_get_rate(&clock) / 4)
+ / CONFIG_SYS_HZ;
+ /* Enable e300 time base */
+ setbits_be32(&immr->sysconf.spcr, SPCR_TBEN_MASK);
+
+ set_dec(timer_priv->decrementer_count);
+
+ /* Switch on interrupts */
+ set_msr(get_msr() | MSR_EE);
+
+ return 0;
+}
+
+/**
+ * timer_interrupt() - Handler for the timer interrupt
+ * @regs: Array of register values
+ */
+void timer_interrupt(struct pt_regs *regs)
+{
+ struct udevice *timer = gd->timer;
+ struct mpc83xx_timer_priv *priv;
+
+ /*
+ * During initialization, gd->timer might not be set yet, but the timer
+ * interrupt may already be enabled. In this case, wait for the
+ * initialization to complete
+ */
+ if (!timer)
+ return;
+
+ priv = dev_get_priv(timer);
+
+ /* Restore Decrementer Count */
+ set_dec(priv->decrementer_count);
+
+ priv->timestamp++;
+
+#if defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG)
+ if ((timestamp % (CONFIG_SYS_WATCHDOG_FREQ)) == 0)
+ WATCHDOG_RESET();
+#endif /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */
+
+#ifdef CONFIG_LED_STATUS
+ status_led_tick(priv->timestamp);
+#endif /* CONFIG_LED_STATUS */
+
+#ifdef CONFIG_SHOW_ACTIVITY
+ board_show_activity(priv->timestamp);
+#endif /* CONFIG_SHOW_ACTIVITY */
+}
+
+void wait_ticks(ulong ticks)
+{
+ ulong end = get_ticks() + ticks;
+
+ while (end > get_ticks())
+ WATCHDOG_RESET();
+}
+
+static int mpc83xx_timer_get_count(struct udevice *dev, u64 *count)
+{
+ u32 tbu, tbl;
+
+ /*
+ * To make sure that no tbl overflow occurred between reading tbl and
+ * tbu, read tbu again, and compare it with the previously read tbu
+ * value: If they're different, a tbl overflow has occurred.
+ */
+ do {
+ tbu = mftbu();
+ tbl = mftb();
+ } while (tbu != mftbu());
+
+ *count = (tbu * 0x10000ULL) + tbl;
+
+ return 0;
+}
+
+static int mpc83xx_timer_probe(struct udevice *dev)
+{
+ struct timer_dev_priv *uc_priv = dev->uclass_priv;
+ struct clk clock;
+ int ret;
+
+ ret = interrupt_init();
+ if (ret) {
+ debug("%s: interrupt_init failed (err = %d)\n",
+ dev->name, ret);
+ return ret;
+ }
+
+ ret = clk_get_by_index(dev, 0, &clock);
+ if (ret) {
+ debug("%s: Could not retrieve clock (err = %d)\n",
+ dev->name, ret);
+ return ret;
+ }
+
+ uc_priv->clock_rate = (clk_get_rate(&clock) + 3L) / 4L;
+
+ return 0;
+}
+
+static const struct timer_ops mpc83xx_timer_ops = {
+ .get_count = mpc83xx_timer_get_count,
+};
+
+static const struct udevice_id mpc83xx_timer_ids[] = {
+ { .compatible = "fsl,mpc83xx-timer" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(mpc83xx_timer) = {
+ .name = "mpc83xx_timer",
+ .id = UCLASS_TIMER,
+ .of_match = mpc83xx_timer_ids,
+ .probe = mpc83xx_timer_probe,
+ .ops = &mpc83xx_timer_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+ .priv_auto_alloc_size = sizeof(struct mpc83xx_timer_priv),
+};