Revert "ARM: davinci: da850: Manual pinmux only when PINCTRL not available"
This reverts commit 877ab2423bc257045a06bc23d4b9440b82bda6fb.
The above patch was designed to shrink code by only pin-muxing items
needed for SPL in SPL and relying on driver model or SPL to mux other
items. Unfortunately, da850evm_direct_nor doesn't use SPL so items
that were only muxed during SPL are not muxed causing the board
to no longer boot.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index f04392e..2d57100 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -215,29 +215,21 @@
};
const struct pinmux_resource pinmuxes[] = {
-#ifndef CONFIG_SPL_BUILD
#ifdef CONFIG_DRIVER_TI_EMAC
PINMUX_ITEM(emac_pins_mdio),
#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
PINMUX_ITEM(emac_pins_rmii),
#else
PINMUX_ITEM(emac_pins_mii),
-#endif /* CONFIG_DRIVER_TI_EMAC */
-#endif /* CONFIG_DRIVER_TI_EMAC_USE_RMII */
-#endif /* CONFIG_SPL_BUILD */
+#endif
+#endif
#ifdef CONFIG_SPI_FLASH
-#if !CONFIG_IS_ENABLED(PINCTRL)
PINMUX_ITEM(spi1_pins_base),
PINMUX_ITEM(spi1_pins_scs0),
#endif
-#endif
-#if !CONFIG_IS_ENABLED(PINCTRL)
PINMUX_ITEM(uart2_pins_txrx),
PINMUX_ITEM(uart2_pins_rtscts),
-#endif
-#if !CONFIG_IS_ENABLED(PINCTRL)
PINMUX_ITEM(i2c0_pins),
-#endif
#ifdef CONFIG_NAND_DAVINCI
PINMUX_ITEM(emifa_pins_cs3),
PINMUX_ITEM(emifa_pins_cs4),
@@ -248,10 +240,8 @@
#endif
PINMUX_ITEM(gpio_pins),
#ifdef CONFIG_MMC_DAVINCI
-#if !CONFIG_IS_ENABLED(PINCTRL)
PINMUX_ITEM(mmc0_pins),
#endif
-#endif
};
const int pinmuxes_size = ARRAY_SIZE(pinmuxes);