menu "mpc83xx CPU"
	depends on MPC83xx

config DEFAULT_IMMR
	hex
	default 0xFF400000

config E300
	def_bool y

config SYS_CPU
	default "mpc83xx"

config SYS_83XX_DDR_USES_CS0
	bool
	help
	  DDR should be configured using CS0 and CS1 instead of CS2 and CS3.

choice
	prompt "Target select"
	optional

config TARGET_MPC837XERDB
	bool "Support MPC837XERDB"
	select ARCH_MPC837X
	select BOARD_EARLY_INIT_F
	select SYS_83XX_DDR_USES_CS0

config TARGET_KMETER1
	bool "Support kmeter1"
	select VENDOR_KM
	select KM_ENABLE_FULL_DM_DTS_SUPPORT

config TARGET_KMCOGE5NE
	bool "Support kmcoge5ne"
	select VENDOR_KM
	select KM_ENABLE_FULL_DM_DTS_SUPPORT

config TARGET_KMTEGR1
	bool "Support kmtegr1"
	select VENDOR_KM
	select KM_ENABLE_FULL_DM_DTS_SUPPORT

config TARGET_TUXX1
	bool "Support tuxx1"
	select VENDOR_KM
	select KM_ENABLE_FULL_DM_DTS_SUPPORT

config TARGET_KMSUPX5
	bool "Support kmsupx5"
	select VENDOR_KM
	select KM_ENABLE_FULL_DM_DTS_SUPPORT

config TARGET_TUGE1
	bool "Support tuge1"
	select VENDOR_KM
	select KM_ENABLE_FULL_DM_DTS_SUPPORT

config TARGET_KMOPTI2
	bool "Support kmopti2"
	select VENDOR_KM
	select KM_ENABLE_FULL_DM_DTS_SUPPORT

config TARGET_KMTEPR2
	bool "Support kmtepr2"
	select VENDOR_KM
	select KM_ENABLE_FULL_DM_DTS_SUPPORT

config TARGET_GAZERBEAM
	bool "Support gazerbeam"
	select ARCH_MPC8308
	select SYS_FSL_ERRATUM_ESDHC111
	imply ENV_IS_IN_FLASH
	help
	  The "Gazerbeam" is a modular system by Guntermann & Drunck GmbH
	  Systementwicklung based on the NXP MPC8308 SoC for usage in KVM
	  appliances.

	  Features include:
	  * Two gigabit ethernet ports
	  * Multiple USB ports (depending on variant)
	  * Several gigabit ethernet or optical fiber ports (depending on
	    variant)
	  * Several display port inputs and outputs, and supporting redrivers
	    (depending on variant)
	  * Several FPGAs with custom logic (depending on variant)

endchoice

config MPC83XX_QUICC_ENGINE
	bool

# TODO: Imply MPC83xx PCI driver
config MPC83XX_PCI_SUPPORT
	bool

# TODO: Imply TSEC driver
config MPC83XX_TSEC1_SUPPORT
	bool

config MPC83XX_TSEC2_SUPPORT
	bool

config MPC83XX_PCIE1_SUPPORT
	bool

config MPC83XX_PCIE2_SUPPORT
	bool

config MPC83XX_SDHC_SUPPORT
	bool

config MPC83XX_SATA
	bool

config MPC83XX_SECOND_I2C
	bool

config MPC83XX_LDP_PIN
	bool

config ARCH_MPC830X
	bool
	select MPC83XX_SDHC_SUPPORT
	select SYS_CACHE_SHIFT_5

config ARCH_MPC8308
	bool
	select ARCH_MPC830X
	select MPC83XX_TSEC1_SUPPORT
	select MPC83XX_TSEC2_SUPPORT
	select MPC83XX_PCIE1_SUPPORT
	select MPC83XX_SECOND_I2C

config ARCH_MPC831X
	bool
	select MPC83XX_PCI_SUPPORT
	select MPC83XX_TSEC1_SUPPORT
	select MPC83XX_TSEC2_SUPPORT
	select SYS_CACHE_SHIFT_5

config ARCH_MPC8313
	bool
	select ARCH_MPC831X
	select MPC83XX_SECOND_I2C
	select FSL_ELBC

config ARCH_MPC832X
	bool
	select MPC83XX_QUICC_ENGINE
	select MPC83XX_PCI_SUPPORT
	select SYS_CACHE_SHIFT_5

config ARCH_MPC834X
	bool
	select SYS_CACHE_SHIFT_5

config ARCH_MPC8360
	bool
	select MPC83XX_QUICC_ENGINE
	select MPC83XX_PCI_SUPPORT
	select MPC83XX_LDP_PIN
	select MPC83XX_SECOND_I2C
	select SYS_CACHE_SHIFT_5

config ARCH_MPC837X
	bool
	select MPC83XX_PCI_SUPPORT
	select MPC83XX_TSEC1_SUPPORT
	select MPC83XX_TSEC2_SUPPORT
	select MPC83XX_PCIE1_SUPPORT
	select MPC83XX_PCIE2_SUPPORT
	select MPC83XX_SDHC_SUPPORT
	select MPC83XX_SATA
	select MPC83XX_LDP_PIN
	select MPC83XX_SECOND_I2C
	select SYS_CACHE_SHIFT_5
	select FSL_ELBC

source "arch/powerpc/cpu/mpc83xx/hrcw/Kconfig"
source "arch/powerpc/cpu/mpc83xx/bats/Kconfig"
source "arch/powerpc/cpu/mpc83xx/lblaw/Kconfig"
source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig"
source "arch/powerpc/cpu/mpc83xx/hid/Kconfig"
source "arch/powerpc/cpu/mpc83xx/sysio/Kconfig"
source "arch/powerpc/cpu/mpc83xx/arbiter/Kconfig"
source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig"

config 83XX_PCICLK
	hex "PCI clock frequency"
	default 0xDEADBEEF
	help
	  If required, the PCI clock frequency to use when configuring
	  the host bridge.

config FSL_ELBC
	bool

config FSL_SERDES
	bool "SerDes initialization"
	depends on !MPC83XX_SERDES

config NEVER_ASSERT_ODT_TO_CPU
	bool "Never assert ODT to internal IOs"

source "board/freescale/mpc837xerdb/Kconfig"
source "board/gdsys/mpc8308/Kconfig"

endmenu